|
Computer Audio Asylum Music servers and other computer based digital audio technologies. |
|
|
|
Computer Audio Asylum Music servers and other computer based digital audio technologies. |
|
In Reply to: cMP - the open source high-end Memory Player posted by cics on December 30, 2007 at 05:42:01:
I was reluctant to list this as I feel cMP will deliver brilliant results on majority of setups. What you do with AC circuits is however very important. You don't need stellar kit.
Having said that, I also got an email on this and as Dynaudio_Rules correctly suggests perhaps hearing a difference using a ferrite core on the USB receiver may be questionable. Yes, I can hear this difference & other changes but I don't have golden ears. The kit is highly revealing:
- Speakers: FocalJMLab Nova Utopia Be (you can see one in the background of cMP's front picture).
- Speaker Cable: Kimber '16TC' (2x8TC per speaker)
- Amps: Levinson 33H using its captive power cords. Power is taken from a dedicated 20amp circuit with high quality circuit breaker. Circuit terminates into a high-current choke based line filter using Neutric connectors. Although 33H regenerates power this is only for the voltage gain section, hence current gain section benefits from line filter.
- DAC+PreAmp: AA Prestige SE (as pure DAC, ie. internal Sony transport and analogue inputs removed, and yes this makes a difference). Currently burning-in another DAC: dCS Scarlatti (DAC + Clock). I plan to use both DACs (this requires a bit of cable swapping).
- XLR I/C: Synergistic Research Tesla Apex X2 (previous was Absolute Ref X2). With Absolute Ref, I would struggle to hear differences, not so with the Tesla Apex - its significantly better. Active shielding is done via SRs Quattro unit.
- Transport: cMP (using Zalman TNN-300 and RME HDSP 9652 Soundcard)
- Digital I/C: Audioquest Optilink 5 (or Van den Hul Optocoupler II). (Difference between glass fibre and high quality / high bandwidth plastic is very obvious with glass being much better).
- Power Cords: Transport uses SR Designers Ref from a basic line conditioner. DAC & Quattro active shielding uses SR Absolute Ref. For DAC, power is taken from Audio Magic Mini Matrix line filter fed by another SR Absolute Ref power cord.
- Rack: Equipment including amps placed on custom built reference stands. Design based on mechanical grounding principles.
All electronic kit is located in adjacent room. I only have speakers and LCD screen in listening room.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups Full ThreadTopic - cMP - the open source high-end Memory Player - cics 05:42:01 12/30/07 (3245)
- RE: cMP - the open source high-end Memory Player - Dawnrazor 14:54:58 10/26/17 (5)
- RE: cMP - the open source high-end Memory Player - Gaston 10:37:53 10/04/19 (2)
- Site seems to be back up - Dawnrazor 15:29:59 04/07/20 (0)
- RE: cMP - the open source high-end Memory Player - Dawnrazor 17:51:38 10/12/19 (0)
- RE: cMP - the open source high-end Memory Player - Dawnrazor 20:20:04 10/29/17 (1)
- RE: cMP - the open source high-end Memory Player - JBen 16:37:43 12/11/17 (0)
- Does cplay cMP’s software run on win 8.1? - Night Fung 05:14:58 12/03/14 (3)
- RE: Does cplay cMP’s software run on win 8.1? - Night Fung 07:53:12 12/03/14 (0)
- RE: Does cplay cMP’s software run on win 8.1? - Ryelands 05:35:21 12/03/14 (1)
- RE: Does cplay cMP’s software run on win 8.1? - internethandle 22:45:01 12/03/14 (0)
- adding a second hard drive to cMP - urlicht.55 04:32:21 10/20/14 (2)
- RE: adding a second hard drive to cMP - Ryelands 05:33:36 10/20/14 (1)
- RE: adding a second hard drive to cMP - urlicht.55 06:04:51 10/20/14 (0)
- RE: cMP - the open source high-end Memory Player, player excited!! - m.v.kints@gmail.com 05:52:00 07/03/14 (6)
- RE: cMP - the open source high-end Memory Player, player excited!! - Bibo01 18:23:11 07/03/14 (1)
- RE: cMP - the open source high-end Memory Player, player excited!! - m.v.kints@gmail.com 04:35:13 07/04/14 (0)
- RE: cMP - the open source high-end Memory Player, player excited!! - theob 09:09:30 07/03/14 (1)
- RE: cMP - the open source high-end Memory Player, player excited!! - m.v.kints@gmail.com 09:36:17 07/03/14 (0)
- RE: cMP - the open source high-end Memory Player, player excited!! - Ryelands 08:58:07 07/03/14 (1)
- RE: cMP - the open source high-end Memory Player, player excited!! - m.v.kints@gmail.com 09:28:27 07/03/14 (0)
- Help-What do you use to rip and/or create cue files - LanceL 09:50:57 08/21/13 (3)
- Exact Audio Copy (EAC) - rickmcinnis@dogwoodfabrics.com 10:14:29 08/21/13 (2)
- RE: Exact Audio Copy (EAC) - LanceL 10:29:20 08/21/13 (1)
- fixed..thx to all - LanceL 12:04:21 08/22/13 (0)
- help-error only works for flac total_samples count in streaminfo - LanceL 19:26:31 08/18/13 (0)
- RE:cplay dsd capability - theob 08:55:32 06/22/13 (5)
- RE:cplay dsd capability - theob 05:23:06 07/10/14 (1)
- RE:cplay dsd capability - JBen 23:08:45 07/10/14 (0)
- RE:cplay dsd capability - Bibo01 17:04:00 06/22/13 (2)
- RE:cplay dsd capability - theob 06:36:08 06/24/13 (1)
- RE:cplay dsd capability - JBen 22:52:34 07/03/14 (0)
- CMP² and DAC ASUS Xonar Essence one + foobar - sebnest 23:52:33 04/30/13 (12)
- RE: CMP² and DAC ASUS Xonar Essence one + foobar - audiodan@tiscali.it 23:20:22 05/16/13 (1)
- RE: CMP² and DAC ASUS Xonar Essence one + foobar - sebnest 08:42:50 05/21/13 (0)
- RE: CMP² and DAC ASUS Xonar Essence one + foobar - Ryelands 01:16:31 05/01/13 (9)
- RE: CMP² and DAC ASUS Xonar Essence one + foobar - sebnest 01:29:09 05/01/13 (8)
- RE: CMP² and DAC ASUS Xonar Essence one + foobar - Ryelands 02:23:10 05/01/13 (7)
- RE: CMP² and DAC ASUS Xonar Essence one + foobar - sebnest 08:44:09 05/01/13 (0)
- RE: CMP² and DAC ASUS Xonar Essence one + foobar - sebnest 04:14:46 05/01/13 (5)
- RE: CMP² and DAC ASUS Xonar Essence one + foobar - Ryelands 05:20:58 05/01/13 (4)
- RE: CMP² and DAC ASUS Xonar Essence one + foobar - sebnest 06:30:27 05/01/13 (3)
- RE: CMP² and DAC ASUS Xonar Essence one + foobar - Ryelands 07:29:55 05/01/13 (2)
- RE: CMP² and DAC ASUS Xonar Essence one + foobar - sebnest 08:00:07 05/01/13 (1)
- RE: CMP² and DAC ASUS Xonar Essence one + foobar - Ryelands 08:41:12 05/01/13 (0)
- Has anyone compared running with disabled video and enabled network? - carcass93 12:54:11 01/18/13 (8)
- Here's what I'm going to try on new cMP build (awaiting parts): - carcass93 12:06:19 01/22/13 (0)
- RE: Has anyone compared running with disabled video and enabled network? - hfavandepas 14:59:13 01/20/13 (3)
- RE: Has anyone compared running with disabled video and enabled network? - JBen 16:51:26 01/20/13 (2)
- I don't think it is contrary - hfavandepas 01:12:38 01/21/13 (1)
- RE: I don't think it is contrary - JBen 08:55:04 01/21/13 (0)
- RE: Has anyone compared running with disabled video and enabled network? - Ryelands 16:06:04 01/18/13 (2)
- RE: Has anyone compared running with disabled video and enabled network? - JBen 20:31:01 01/18/13 (1)
- RE: Has anyone compared running with disabled video and enabled network? - Ryelands 02:43:04 01/19/13 (0)
- ESI Juli@ XTe (Juli@'s new PCIe version) - hfavandepas 12:07:03 06/08/12 (10)
- Carcass is right, ESI REALLY stuck to it's guns... - GStew 21:02:32 06/25/13 (0)
- I see they REALLY stick to their guns. - carcass93 12:49:09 01/09/13 (1)
- My experience was: the juli@ digital part works great when applied as Cics recommends - hfavandepas 06:48:16 01/11/13 (0)
- RE: ESI Juli@ XTe (Juli@'s new PCIe version) - GStew 19:08:33 09/15/12 (0)
- RE: ESI Juli@ XTe (Juli@'s new PCIe version) - Toni 21:57:34 06/11/12 (0)
- Cannot find a seller in the US, either - rickmcinnis@dogwoodfabrics.com 23:46:42 06/08/12 (4)
- RE: Cannot find a seller in the US, either - smicyta 01:06:24 09/11/12 (3)
- Seemed much better to me ... - rickmcinnis@dogwoodfabrics.com 06:25:14 09/13/12 (2)
- RE: Seemed much better to me ... - smicyta 08:22:20 09/14/12 (1)
- But I am not using the CELEERON processor and I, too, unpsample - rickmcinnis@dogwoodfabrics.com 14:06:18 09/18/12 (0)
- Moving up to the H61 boards & slimmed-system HW Questions & Musings... - GStew 11:24:55 05/27/12 (16)
- RE: Moving up to the H61 boards & slimmed-system HW Questions & Musings... - mrporcelain 07:35:10 01/29/13 (0)
- IR-wireless keyboards with learning macro/activity-capable remotes update... - GStew 18:48:58 06/09/12 (5)
- So how do these work? - theob 06:40:56 06/10/12 (4)
- Sorry, I can see I left out some important details... - GStew 10:19:01 06/10/12 (3)
- RE: Sorry, I can see I left out some important details... - Dawnrazor 16:23:18 06/10/12 (1)
- Here's why... - GStew 17:36:31 06/10/12 (0)
- RE: Sorry, I can see I left out some important details... - theob 13:28:10 06/10/12 (0)
- RE: Moving up to the H61 boards & slimmed-system HW Questions & Musings... - rickmcinnis@dogwoodfabrics.com 07:55:12 05/29/12 (2)
- RE: Moving up to the H61 boards & slimmed-system HW Questions & Musings... - Bibo01 16:03:33 05/29/12 (1)
- No, there is a plug for the 5 volts - rickmcinnis@dogwoodfabrics.com 19:07:21 05/29/12 (0)
- What Theob asked - Dawnrazor 21:36:30 05/27/12 (0)
- RE: Moving up to the H61 boards & slimmed-system HW Questions & Musings... - theob 16:32:29 05/27/12 (4)
- RE: Moving up to the H61 boards & slimmed-system HW Questions & Musings... - GStew 09:10:22 05/28/12 (3)
- RE: Moving up to the H61 boards & slimmed-system HW Questions & Musings... - theob 10:14:34 05/28/12 (0)
- RE: Moving up to the H61 boards & slimmed-system HW Questions & Musings... - Dawnrazor 09:50:23 05/28/12 (1)
- RE: Moving up to the H61 boards & slimmed-system HW Questions & Musings... - GStew 13:21:51 05/28/12 (0)
- Atom-Asrock revisited - Douwe01nl 14:51:24 05/18/12 (0)
- Mobo and cpu recommendations - Dawnrazor 18:58:30 04/26/12 (17)
- RE: Mobo and cpu recommendations - zoran.obrad@gmail.com 00:45:19 09/03/12 (2)
- RE: Mobo and cpu recommendations - Bibo01 16:51:01 09/03/12 (0)
- RE: Mobo and cpu recommendations - Bibo01 00:55:16 09/03/12 (0)
- RE: Mobo and cpu recommendations - play-mate 08:35:42 06/09/12 (3)
- RE: Mobo and cpu recommendations - zoran.obrad@gmail.com 10:16:34 08/31/12 (1)
- RE: Mobo and cpu recommendations - Bibo01 16:23:51 08/31/12 (0)
- RE: Mobo and cpu recommendations - Dawnrazor 11:49:44 06/09/12 (0)
- RE: Mobo and cpu recommendations - Laurent D. 14:07:42 05/11/12 (0)
- New GA-H77M-D3H: issues with resampling. - Laurent D. 13:36:09 05/08/12 (8)
- RE: New GA-H77M-D3H: issues with resampling. - Dawnrazor 16:14:58 05/08/12 (7)
- RE: New GA-H77M-D3H: issues with resampling. - Laurent D. 13:14:01 05/10/12 (6)
- RE: New GA-H77M-D3H: issues with resampling. - Dawnrazor 22:08:09 05/10/12 (5)
- RE: New GA-H77M-D3H: issues with resampling. - Laurent D. 02:03:12 05/12/12 (4)
- RE: New GA-H77M-D3H: issues with resampling. - Dawnrazor 21:37:28 05/12/12 (3)
- Some Progress... - Laurent D. 03:02:44 05/13/12 (2)
- RE: Some Progress... - Dawnrazor 05:37:37 05/13/12 (1)
- RE: Some Progress... - Laurent D. 07:22:39 05/13/12 (0)
- HDD Question - Douwe01nl 05:45:39 04/23/12 (2)
- RE: HDD Question - Ryelands 06:17:43 04/23/12 (1)
- RE: HDD Question - Douwe01nl 13:52:18 05/18/12 (0)
- Eight hours to download ISO before cut off sharing - jackwong96 10:39:19 03/23/12 (0)
- An Extraordinary Windows Installation for Use with Juli@ - jackwong96 06:21:37 03/20/12 (38)
- RE: An Extraordinary Windows Installation for Use with Juli@ - audiofanatic 09:04:30 03/21/12 (37)
- RE: An Extraordinary Windows Installation for Use with Juli@ - jackwong96 10:35:18 03/21/12 (1)
- RE: An Extraordinary Windows Installation for Use with Juli@ - GStew 18:56:40 03/22/12 (0)
- RE: An Extraordinary Windows Installation for Use with Juli@ - jackwong96 10:16:14 03/21/12 (34)
- RE: An Extraordinary Windows Installation for Use with Juli@ - quangsunrise@gmail.com 09:13:22 11/01/19 (33)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Ryelands 10:39:31 11/02/19 (32)
- RE: An Extraordinary Windows Installation for Use with Juli@ - JBen 22:55:04 03/18/20 (30)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 15:16:37 03/21/20 (29)
- RE: An Extraordinary Windows Installation for Use with Juli@ - JBen 18:04:31 03/21/20 (28)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 21:48:18 03/21/20 (27)
- RE: An Extraordinary Windows Installation for Use with Juli@ - JBen 23:12:35 03/21/20 (26)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 07:06:34 03/23/20 (22)
- RE: An Extraordinary Windows Installation for Use with Juli@ - JBen 23:34:17 03/23/20 (21)
- RE: An Extraordinary Windows Installation for Use with Juli@ - old guy 42 14:31:16 03/24/20 (19)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 16:29:25 03/24/20 (18)
- RE: An Extraordinary Windows Installation for Use with Juli@ - old guy 42 02:39:08 03/25/20 (17)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 19:51:56 04/06/20 (3)
- RE: An Extraordinary Windows Installation for Use with Juli@ - old guy 42 08:29:22 04/07/20 (2)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 08:47:43 04/07/20 (1)
- RE: An Extraordinary Windows Installation for Use with Juli@ - old guy 42 08:57:24 04/07/20 (0)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 17:14:26 03/25/20 (0)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 14:56:58 03/25/20 (11)
- RE: An Extraordinary Windows Installation for Use with Juli@ - old guy 42 01:37:30 03/26/20 (5)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 15:22:42 03/27/20 (2)
- RE: An Extraordinary Windows Installation for Use with Juli@ - old guy 42 01:29:19 04/01/20 (1)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 10:21:58 04/01/20 (0)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 09:00:37 03/27/20 (0)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 08:44:29 03/27/20 (0)
- RE: An Extraordinary Windows Installation for Use with Juli@ - JBen 20:08:25 03/25/20 (4)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 08:54:42 03/27/20 (3)
- RE: An Extraordinary Windows Installation for Use with Juli@ - JBen 15:47:48 03/30/20 (2)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 18:30:28 03/31/20 (1)
- RE: An Extraordinary Windows Installation for Use with Juli@ - JBen 00:54:19 04/01/20 (0)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 11:36:53 03/24/20 (0)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Ryelands 03:05:50 03/23/20 (2)
- RE: An Extraordinary Windows Installation for Use with Juli@ - JBen 22:43:05 03/23/20 (0)
- RE: An Extraordinary Windows Installation for Use with Juli@ - Dawnrazor 07:10:46 03/23/20 (0)
- RE: An Extraordinary Windows Installation for Use with Juli@ - quangsunrise@gmail.com 09:34:31 11/03/19 (0)
- RE: cMP - the open source high-end Memory Player - audiofanatic 07:51:21 03/06/12 (1)
- RE: cMP - the open source high-end Memory Player - smicyta 17:02:59 03/06/12 (0)
- RE: cMP - the open source high-end Memory Player - audiofanatic 22:42:40 02/24/12 (1)
- RE: cMP - the open source high-end Memory Player - GStew 19:49:32 02/27/12 (0)
- cMP linear psu 12V/5A - audiofanatic 06:55:57 02/20/12 (2)
- RE: cMP linear psu 12V/5A - Mihaylov 07:38:16 03/23/12 (1)
- RE: cMP linear psu 12V/5A - audiofanatic 23:12:05 03/25/12 (0)
- Juli@ VR filter - orediger 09:03:23 02/18/12 (3)
- RE: Juli@ VR filter - theob 16:55:25 02/26/12 (0)
- Minimizing Switching Regulator Residue in Linear Regulator Outputs - hfavandepas 16:36:12 02/24/12 (0)
- RE: Juli@ VR filter - Douwe01nl 08:14:48 02/19/12 (0)
- RE: cMP - the open source high-end Memory Player - smicyta 17:34:06 02/17/12 (5)
- Try using Standard ATX PS to deterimine - jackwong96 09:18:21 02/18/12 (4)
- RE: Try using Standard ATX PS to deterimine - smicyta 17:36:31 02/18/12 (3)
- Worth installing XP Home SP1 - jackwong96 22:24:53 02/18/12 (2)
- RE: Worth installing XP Home SP1 - Ryelands 01:54:51 02/19/12 (1)
- RE: Worth installing XP Home SP1 - jackwong96 03:57:23 02/19/12 (0)
- Juli@ @3,3v - Douwe01nl 11:29:29 02/08/12 (0)
- cMP memory choice - audiofanatic 00:31:20 02/04/12 (1)
- RE: cMP memory choice - Douwe01nl 12:02:25 02/08/12 (0)
- Process error on Win 7? - helax 09:14:56 01/25/12 (0)
- Windows 7 - optimisations? - domgoh@yahoo.com 05:17:15 01/25/12 (2)
- RE: Windows 7 - optimisations? - mikebu@tiscali.co.uk 12:25:18 11/07/12 (0)
- RE: Windows 7 - optimisations? - play-mate 05:41:32 02/06/12 (0)
- RE: cMP - the open source high-end Memory Player - aljordan 07:02:10 01/20/12 (2)
- RE: cMP - the open source high-end Memory Player - play-mate 05:33:42 02/04/12 (0)
- RE: cMP - the open source high-end Memory Player - Ryelands 02:56:07 01/21/12 (0)
- cMP - software sequence of installation - domgoh@yahoo.com 23:13:04 01/17/12 (2)
- create 4 partitions: 3 small and 1 big - hfavandepas 02:40:13 01/18/12 (0)
- RE: cMP - software sequence of installation - Ryelands 02:10:58 01/18/12 (0)
- LCD power for Zalman HD160XT Plus - domgoh@yahoo.com 23:08:03 01/17/12 (7)
- RE: LCD power for Zalman HD160XT Plus - smicyta 17:35:59 01/18/12 (6)
- RE: LCD power for Zalman HD160XT Plus - domgoh@yahoo.com 18:31:21 01/18/12 (5)
- RE: LCD power for Zalman HD160XT Plus - smicyta 19:05:05 01/18/12 (4)
- RE: LCD power for Zalman HD160XT Plus - domgoh@yahoo.com 19:32:27 01/18/12 (3)
- RE: LCD power for Zalman HD160XT Plus - smicyta 05:17:39 01/19/12 (2)
- RE: LCD power for Zalman HD160XT Plus - domgoh@yahoo.com 06:21:34 01/19/12 (1)
- RE: LCD power for Zalman HD160XT Plus - smicyta 19:26:52 01/19/12 (0)
- Thermalright SI128SE CPU cooler - domgoh@yahoo.com 03:16:55 01/13/12 (1)
- RE: Thermalright SI128SE CPU cooler - smicyta 04:20:33 01/13/12 (0)
- Rerouting power supply - domgoh@yahoo.com 07:37:19 01/11/12 (3)
- RE: Rerouting power supply - steppe 19:10:50 01/13/12 (2)
- RE: Rerouting power supply - domgoh@yahoo.com 22:07:16 01/13/12 (1)
- I use - steppe 18:37:22 01/14/12 (0)
- Zalman HD160XT Plus - domgoh@yahoo.com 22:40:00 01/10/12 (2)
- I would - steppe 19:00:15 01/13/12 (1)
- RE: I would - domgoh@yahoo.com 22:01:56 01/13/12 (0)
- RE: Gigabyte GA-H55M-D2H - domgoh@yahoo.com 05:21:15 01/10/12 (1)
- RE: Gigabyte GA-H55M-D2H - jackwong96 10:09:56 01/14/12 (0)
- cMP Mode hangs on Welcome Screen in Vista 32-bit - Ken Stuart 20:36:23 01/09/12 (0)
- Did someone make fully linear power supply for Gigabyte GA-H67M-UD2H-B3? - Mihaylov 10:35:56 01/09/12 (2)
- Hope this is not so for the H61 boards - rickmcinnis@dogwoodfabrics.com 13:00:07 01/09/12 (1)
- OK - Mihaylov 13:18:42 01/09/12 (0)
- Jack Wong - guidance on H61 MB BIOS, please - rickmcinnis@dogwoodfabrics.com 01:40:56 01/08/12 (9)
- RE: Jack Wong - guidance on H61 MB BIOS, please - jackwong96 09:57:49 01/14/12 (6)
- Thanks very much - rickmcinnis@dogwoodfabrics.com 09:24:36 01/15/12 (5)
- RE: Thanks very much - jackwong96 11:05:16 01/15/12 (4)
- Yes it is a "decent" MB! - rickmcinnis@dogwoodfabrics.com 11:54:12 01/16/12 (3)
- Limit Turbo current to 30 means - jackwong96 08:06:44 01/18/12 (0)
- RE: Which CPU are you using? - smicyta 17:18:39 01/16/12 (1)
- i3-2100T - rickmcinnis@dogwoodfabrics.com 09:17:12 01/17/12 (0)
- RE: Jack Wong - guidance on H61 MB BIOS, please - Mihaylov 10:44:32 01/09/12 (1)
- GIGABYTE GA-H61M-S2H is what I have - rickmcinnis@dogwoodfabrics.com 12:57:38 01/09/12 (0)
- What mobo for new cMP setup? : Intel NM10 Express (Intel Atom) or socket 1155 + Intel I3 or Celeron - hfavandepas 14:43:05 01/06/12 (19)
- RE: What mobo for new cMP setup? : Intel NM10 Express (Intel Atom) or socket 1155 + Intel I3 or Celeron - Douwe01nl 09:19:47 01/07/12 (18)
- RE: What mobo for new cMP setup? : Intel NM10 Express (Intel Atom) or socket 1155 + Intel I3 or Celeron - smicyta 16:02:20 01/12/12 (9)
- no SSE on Alix-1D's AMD-CPU, - Douwe01nl 17:52:15 01/12/12 (6)
- RE: no SSE on Alix-1D's AMD-CPU, - smicyta 18:45:53 01/12/12 (5)
- RE: no SSE on Alix-1D's AMD-CPU, - Douwe01nl 23:13:33 01/12/12 (4)
- RE: no SSE on Alix-1D's AMD-CPU, - wlowes 07:34:16 05/05/12 (3)
- RE: no SSE on Alix-1D's AMD-CPU, - Douwe01nl 15:35:19 05/05/12 (2)
- RE: no SSE on Alix-1D's AMD-CPU,-- A / B CMP vs VoyageMPD - wlowes 20:14:09 05/05/12 (0)
- RE: no SSE on Alix-1D's AMD-CPU, - wlowes 17:39:04 05/05/12 (0)
- RE: What mobo for new cMP setup? : Intel NM10 Express (Intel Atom) or socket 1155 + Intel I3 or Celeron - Ryelands 16:42:09 01/12/12 (1)
- RE: What mobo for new cMP setup? : Intel NM10 Express (Intel Atom) or socket 1155 + Intel I3 or Celeron - smicyta 17:08:16 01/12/12 (0)
- RE: What mobo for new cMP setup? : Intel NM10 Express (Intel Atom) or socket 1155 + Intel I3 or Celeron - theob 09:26:17 01/07/12 (7)
- cd-player seems to win over CMP - Douwe01nl 12:17:44 01/07/12 (6)
- RE: cd-player seems to win over CMP - Jolida 23:22:26 01/10/12 (3)
- RE: cd-player seems to win over CMP - theob 05:32:26 01/11/12 (2)
- RE: cd-player seems to win over CMP - Jolida 05:42:50 01/11/12 (1)
- RE: cd-player seems to win over CMP - theob 07:07:01 01/11/12 (0)
- RE: cd-player seems to win over CMP - Dawnrazor 00:29:10 01/08/12 (1)
- RE: cd-player seems to win over CMP - Douwe01nl 03:33:54 01/08/12 (0)
- Safe Mode - how to undo CMP Mode ?? - Ken Stuart 19:56:09 01/04/12 (1)
- RE: Safe Mode - how to undo CMP Mode ?? - Ken Stuart 21:30:02 01/04/12 (0)
- Why the power dance on the old hardware - Dawnrazor 12:44:22 12/27/11 (2)
- RE: Why the power dance on the old hardware - theob 14:26:53 12/28/11 (0)
- You might try Serge's (STEPPE) idea of using multiple BIOS entries - rickmcinnis@dogwoodfabrics.com 07:57:13 12/28/11 (0)
- The Singing Atom - Douwe01nl 14:05:36 12/20/11 (7)
- undervolting by HARDWARE tweaks - Douwe01nl 03:40:01 12/31/11 (0)
- Is Asrock AD525PV3 better sounding than H55M-USB3, - jackwong96 22:26:45 12/20/11 (5)
- Yes Asrock AD525PV3 is much better - Douwe01nl 01:11:41 12/21/11 (4)
- RE: Yes Asrock AD525PV3 is much better - jackwong96 09:51:08 12/21/11 (3)
- RE: Yes Asrock AD525PV3 is much better - Douwe01nl 06:17:49 12/22/11 (2)
- RE: Yes Asrock AD525PV3 is much better - jackwong96 08:48:18 12/22/11 (1)
- RE: Yes Asrock AD525PV3 is much better - Douwe01nl 06:35:39 12/24/11 (0)
- Jack Wong, your help, please - rickmcinnis@dogwoodfabrics.com 08:40:17 12/20/11 (11)
- RE: Jack Wong, your help, please - jackwong96 10:52:20 12/20/11 (10)
- THANKS!!! very much - rickmcinnis@dogwoodfabrics.com 11:47:01 12/20/11 (9)
- Everything removed, and tomorrow I get to see ... - rickmcinnis@dogwoodfabrics.com 21:28:29 12/20/11 (8)
- Mr. Wong, should I bother with the capacitors? - rickmcinnis@dogwoodfabrics.com 07:53:53 12/21/11 (6)
- Don't bother, leave them there, - jackwong96 08:14:02 12/21/11 (5)
- Tonight, tonight ... - rickmcinnis@dogwoodfabrics.com 09:40:03 12/21/11 (4)
- It works - but my old install will not boot - rickmcinnis@dogwoodfabrics.com 14:01:58 12/21/11 (3)
- RE: It works - but my old install will not boot - jackwong96 18:02:46 12/21/11 (2)
- Through with most of the install, and ... - rickmcinnis@dogwoodfabrics.com 08:55:55 12/22/11 (1)
- The difference is in the background - jackwong96 09:48:24 12/22/11 (0)
- Congratulations Rick! Very curious about your results! n/t - Douwe01nl 01:18:06 12/21/11 (0)
- Nettop as an alternative - Eunegis 01:19:28 12/11/11 (18)
- RE: Nettop as an alternative - Douwe01nl 14:20:26 12/12/11 (17)
- RE: Nettop as an alternative - Eunegis 15:08:41 12/12/11 (16)
- RE: Nettop as an alternative - Douwe01nl 14:26:49 12/13/11 (15)
- RE: Nettop as an alternative - Eunegis 01:09:56 12/14/11 (14)
- The saga of my netbook power supply - kclo 02:56:37 12/16/11 (12)
- RE: The saga of my netbook power supply - Eunegis 03:03:28 12/16/11 (11)
- RE: The saga of my netbook power supply - kclo 19:52:45 12/16/11 (10)
- RE: The saga of my netbook power supply - Goody found... - Eunegis 02:40:39 12/23/11 (4)
- RE: The saga of my netbook power supply - Goody found... - Bibo01 06:27:59 12/23/11 (3)
- RE: The saga of my netbook power supply - Goody found... - Eunegis 10:15:57 01/01/12 (0)
- RE: The saga of my netbook power supply - Goody found... - Ryelands 06:56:40 12/23/11 (1)
- RE: The saga of my netbook power supply - Goody found... - Bibo01 07:09:14 12/23/11 (0)
- RE: The saga of my netbook power supply - Eunegis 14:19:20 12/17/11 (4)
- RE: The saga of my netbook power supply - kclo 21:55:49 12/17/11 (3)
- RE: The saga of my netbook power supply - Eunegis 00:56:56 12/18/11 (2)
- RE: The saga of my netbook power supply - kclo 02:14:40 12/18/11 (0)
- RE: The saga of my netbook power supply - Eunegis 01:59:31 12/18/11 (0)
- SQ net+battery was better than battery-only - nt. - Douwe01nl 02:34:56 12/14/11 (0)
- To Dawnrazor: My letters to you are perceived as spam again - Mihaylov 14:33:28 12/10/11 (1)
- RE: To Dawnrazor: My letters to you are perceived as spam again - Dawnrazor 14:48:25 12/13/11 (0)
- Can cMP decode DVDs? - Beetlemania 08:53:18 12/02/11 (1)
- No. - Mihaylov 09:04:09 12/02/11 (0)
- cMP - Minlogon - audiofanatic 00:05:09 12/02/11 (2)
- One of the first things I do - rickmcinnis@dogwoodfabrics.com 10:00:45 12/02/11 (0)
- RE: cMP - Minlogon - Ryelands 00:44:27 12/02/11 (0)
- RE: cMP - the open source high-end Memory Player - twlai 02:39:46 11/27/11 (13)
- RE: cMP - the open source high-end Memory Player - twlai 05:26:14 11/27/11 (0)
- LiFePo4 Battery from 13.2V to 12V (or 11.8V) - twlai 02:42:16 11/27/11 (11)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - jackwong96 03:50:12 11/27/11 (10)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - kclo 03:14:54 12/19/11 (7)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - kclo 16:23:02 12/20/11 (0)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - jackwong96 08:44:37 12/20/11 (2)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - kclo 16:29:08 12/20/11 (0)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - kclo 16:20:28 12/20/11 (0)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - theob 03:28:50 12/19/11 (2)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - kclo 04:06:40 12/19/11 (1)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - theob 04:32:45 12/19/11 (0)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - twlai 04:01:03 11/27/11 (8)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - jackwong96 04:40:54 11/27/11 (0)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - twlai 04:20:14 11/27/11 (6)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - jackwong96 04:47:40 11/27/11 (5)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - twlai 05:32:43 11/27/11 (4)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - jackwong96 08:00:42 11/27/11 (3)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - twlai 14:42:15 11/27/11 (2)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - jackwong96 17:44:07 11/27/11 (1)
- RE: LiFePo4 Battery from 13.2V to 12V (or 11.8V) - twlai 04:24:02 11/28/11 (0)
- PS/2 Mice & other recent interesting HW comments... - GStew 19:59:29 11/20/11 (21)
- RE: PS/2 Mice & other recent interesting HW comments... - audiodan@tiscali.it 23:15:28 11/24/11 (0)
- More interesting HW stuffs PLUS Questions for Mihaylov & Rick McInnis... - GStew 22:06:27 11/24/11 (3)
- RE: More interesting HW stuffs PLUS Questions for Mihaylov & Rick McInnis... - jackwong96 13:14:11 11/26/11 (0)
- RE: More interesting HW stuffs PLUS Questions for Mihaylov & Rick McInnis... - Mihaylov 11:25:38 11/26/11 (0)
- I have had the III since it came out - rickmcinnis@dogwoodfabrics.com 07:47:01 11/26/11 (0)
- Remote mice and other subjects - rickmcinnis@dogwoodfabrics.com 08:42:38 11/23/11 (0)
- PS/2 Wireless Mice Solved.... - GStew 19:18:16 11/22/11 (0)
- RE: Non-Native PCI Mobos - jackwong96 08:16:31 11/22/11 (3)
- H55M-USB3 experiences and mobo question - Douwe01nl 12:07:00 11/23/11 (2)
- RE: H55M-USB3 experiences and mobo question - jackwong96 19:24:52 11/23/11 (1)
- RE: H55M-USB3 experiences and mobo question - Ryelands 00:33:09 11/24/11 (0)
- I tried some of those boards but never listened to them - rickmcinnis@dogwoodfabrics.com 14:14:43 11/21/11 (5)
- H61M-S2H works fine with Julia@ - jackwong96 07:47:06 11/22/11 (4)
- RE: H61M-S2H works fine with Julia@ - Mihaylov 09:55:58 11/22/11 (3)
- RE: H61M-S2H works fine with Julia@ - GStew 19:21:27 11/22/11 (2)
- Briefly tested H55M-USB3 - jackwong96 09:23:22 11/24/11 (0)
- RE: H61M-S2H works fine with Julia@ - Mihaylov 19:41:12 11/22/11 (0)
- About IDE DOM (Disk on Module) - Mihaylov 12:39:42 11/21/11 (0)
- RE: PS/2 Mice & other recent interesting HW comments... - GStew 20:29:12 11/20/11 (2)
- B65, Q65 and Q67 are the chipsets for business class systemboards. - Mihaylov 12:21:29 11/21/11 (1)
- RE: B65, Q65 and Q67 are the chipsets for business class systemboards. - GStew 19:40:47 11/22/11 (0)
- CMP Hardware Update - jackwong96 09:50:00 11/12/11 (52)
- Always good to see your name on the Forum! - rickmcinnis@dogwoodfabrics.com 10:03:14 11/14/11 (42)
- H55M UD2H - How to Power the Memory! - jackwong96 09:00:14 11/15/11 (24)
- Project for the long weekend - WHICH battery to use? - rickmcinnis@dogwoodfabrics.com 10:15:25 11/23/11 (2)
- RE: Project for the long weekend - WHICH battery to use? - jackwong96 18:29:01 11/23/11 (1)
- Thanks, again. - rickmcinnis@dogwoodfabrics.com 08:45:35 11/28/11 (0)
- How to Power the Memory - Linear Regulator - jackwong96 10:04:21 11/22/11 (19)
- RE: How to Power the Memory - Linear Regulator - Mihaylov 11:12:28 11/22/11 (16)
- How to Power the Memory - Part 1 Linear Regulator etc - jackwong96 22:51:17 11/22/11 (15)
- How to Power the Memory - Part 2.1 : Three Terminal Linear Regulator - jackwong96 08:30:20 11/26/11 (10)
- RE: How to Power the Memory - Part 2.1 : Three Terminal Linear Regulator - theob 11:52:09 11/26/11 (3)
- RE: How to Power the Memory - Part 2.1 : Three Terminal Linear Regulator - jackwong96 12:17:39 11/26/11 (2)
- RE: How to Power the Memory - Part 2.1 : Three Terminal Linear Regulator - theob 13:12:14 11/26/11 (1)
- G31-E2SL is similar to G31ES2C. Same modification in Part2.2 applies. - jackwong96 13:23:15 11/26/11 (0)
- How to Power the Memory - Part 2.2 : Three Terminal Linear Regulator - jackwong96 10:32:30 11/26/11 (5)
- RE: How to Power the Memory - Part 2.2 : Three Terminal Linear Regulator - theob 06:12:39 12/23/11 (1)
- RE: How to Power the Memory - Part 2.2 : Three Terminal Linear Regulator - jackwong96 08:31:05 12/23/11 (0)
- RE: How to Power the Memory - Part 2.2 : Three Terminal Linear Regulator - theob 12:40:04 12/08/11 (1)
- RE: How to Power the Memory - Part 2.2 : Three Terminal Linear Regulator - jackwong96 05:31:12 12/14/11 (3)
- RE: How to Power the Memory - Part 2.2 : Three Terminal Linear Regulator - theob 07:09:13 12/14/11 (0)
- RE: How to Power the Memory - Part 2.2 : Three Terminal Linear Regulator - theob 06:44:50 12/14/11 (1)
- RE: How to Power the Memory - Part 2.2 : Three Terminal Linear Regulator - jackwong96 09:02:35 12/14/11 (0)
- RE: How to Power the Memory - Part 2.2 : Update - jackwong96 04:56:35 11/27/11 (0)
- Thanks Jack! - Mihaylov 11:07:34 11/26/11 (0)
- RE: How to Power the Memory - Part 1 Linear Regulator etc - Mihaylov 07:13:25 11/23/11 (0)
- RE: How to Power the Memory - Part 1 Linear Regulator etc - theob 06:02:32 11/23/11 (2)
- RE: How to Power the Memory - Part 1 Linear Regulator etc - jackwong96 08:42:12 11/23/11 (1)
- RE: How to Power the Memory - Part 1 Linear Regulator etc - theob 09:08:55 11/23/11 (0)
- RE: How to Power the Memory - Linear Regulator - theob 10:33:19 11/22/11 (1)
- RE: How to Power the Memory - Linear Regulator - jackwong96 10:40:06 11/22/11 (0)
- Thanks very much - had no idea it could be so simple! - rickmcinnis@dogwoodfabrics.com 09:22:49 11/15/11 (0)
- RE: Always good to see your name on the Forum! - jackwong96 10:37:21 11/14/11 (16)
- I am using the H55m-UD2H - rickmcinnis@dogwoodfabrics.com 11:06:02 11/14/11 (15)
- RE: I am using the H55m-UD2H - jackwong96 08:22:26 11/15/11 (11)
- I will need your blessings of good luck! - rickmcinnis@dogwoodfabrics.com 09:28:12 11/15/11 (10)
- Removing the video chips will make noticable improvement in SQ - jackwong96 08:18:08 11/16/11 (9)
- RE: Removing the video chips will make noticable improvement in SQ - theob 13:03:49 11/16/11 (8)
- The Story of a 0.01 Ohm Resistor - jackwong96 09:31:21 11/17/11 (7)
- Another bit of inspiration - - rickmcinnis@dogwoodfabrics.com 11:44:34 11/17/11 (5)
- RE: Another bit of inspiration - - jackwong96 05:34:44 11/20/11 (4)
- I was being philosophic ... - rickmcinnis@dogwoodfabrics.com 14:20:24 11/21/11 (3)
- I agree with Rick - theob 15:25:48 11/21/11 (2)
- Much obliged! - jackwong96 08:47:59 11/22/11 (1)
- Thank YOU, Sir ... - rickmcinnis@dogwoodfabrics.com 08:48:53 11/23/11 (0)
- RE: The Story of a 0.01 Ohm Resistor - theob 10:40:54 11/17/11 (0)
- Removing chips from H55mUD2H - rickmcinnis@dogwoodfabrics.com 12:02:22 11/14/11 (2)
- Now I see why I was having trouble - rickmcinnis@dogwoodfabrics.com 12:07:38 11/14/11 (1)
- RE: Now I see why I was having trouble - jackwong96 09:20:40 11/15/11 (0)
- RE: CMP Hardware Update - Mihaylov 12:00:09 11/12/11 (4)
- RE: CMP Hardware Update - jackwong96 12:34:12 11/12/11 (3)
- RE: CMP Hardware Update - Mihaylov 13:13:46 11/12/11 (2)
- RE: CMP Hardware Update - jackwong96 14:27:34 11/12/11 (1)
- Thanks! - Mihaylov 17:03:06 11/12/11 (0)
- RE: CMP Hardware Update - theob 10:51:17 11/12/11 (3)
- RE: CMP Hardware Update - jackwong96 11:10:04 11/12/11 (2)
- RE: CMP Hardware Update - theob 11:45:36 11/12/11 (0)
- RE: CMP Hardware Update - theob 11:27:38 11/12/11 (0)
- Please suggest hardware for my 2nd CMP (longtime members please chime in) - whodat06 06:24:38 11/12/11 (0)
- Please suggest hardware for my 2nd CMP (longtime members please chime in) - whodat06 17:45:12 11/11/11 (0)
- Please suggest hardware for my 2nd CMP (longtime members please chime in) - whodat06 12:36:48 11/11/11 (15)
- RE: Please suggest hardware for my 2nd CMP (longtime members please chime in) - Mihaylov 13:54:59 11/11/11 (14)
- RE: Please suggest hardware for my 2nd CMP (sorry for the extra posts..I think I hit reload too many times) - whodat06 07:18:49 11/12/11 (13)
- RE: Please suggest hardware for my 2nd CMP (sorry for the extra posts..I think I hit reload too many times) - Mihaylov 17:38:23 11/12/11 (12)
- RE: Please suggest hardware for my 2nd CMP (sorry for the extra posts..I think I hit reload too many times) - whodat06 11:29:52 11/13/11 (11)
- RE: Please suggest hardware for my 2nd CMP (sorry for the extra posts..I think I hit reload too many times) - Mihaylov 10:31:05 11/14/11 (10)
- RE: Please suggest hardware for my 2nd CMP (sorry for the extra posts..I think I hit reload too many times) - whodat06 20:44:01 11/14/11 (9)
- RE: Please suggest hardware for my 2nd CMP (sorry for the extra posts..I think I hit reload too many times) - Mihaylov 17:53:33 11/15/11 (6)
- RE: Please suggest hardware for my 2nd CMP (sorry for the extra posts..I think I hit reload too many times) - whodat06 20:28:21 11/16/11 (5)
- RE: Please suggest hardware for my 2nd CMP (sorry for the extra posts..I think I hit reload too many times) - Mihaylov 15:16:24 11/17/11 (4)
- Agree, cool-looking cases... - GStew 19:29:20 11/20/11 (3)
- Not only cool-looking cases... - Mihaylov 11:49:55 11/21/11 (2)
- RE: Not only cool-looking cases... - whodat06 22:39:25 11/21/11 (1)
- RE: Not only cool-looking cases... - Mihaylov 10:48:13 11/22/11 (0)
- RE: Please suggest hardware for my 2nd CMP (sorry for the extra posts..I think I hit reload too many times) - audiofanatic 02:07:05 11/15/11 (1)
- RE: Please suggest hardware for my 2nd CMP (sorry for the extra posts..I think I hit reload too many times) - whodat06 20:06:22 11/15/11 (0)
- Please suggest hardware for my 2nd CMP (longtime members please chime in) - whodat06 11:30:00 11/11/11 (0)
- Headless Atom; IDE or SATA - Douwe01nl 14:30:11 11/06/11 (0)
- Power Supply for my sound card - twlaipeter@hkbn.net 04:12:38 11/04/11 (6)
- RE: Power Supply for my sound card - GStew 11:13:28 11/06/11 (5)
- RE: Power Supply for my sound card - twlaipeter@hkbn.net 04:10:18 11/07/11 (4)
- RE: Power Supply for my sound card - twlaipeter@hkbn.net 19:22:01 11/07/11 (3)
- RE: Power Supply for my sound card - twlaipeter@hkbn.net 03:16:27 11/09/11 (2)
- RE: Power Supply for my sound card - GStew 07:04:17 11/09/11 (1)
- RE: Power Supply for my sound card - twlaipeter@hkbn.net 00:49:39 11/12/11 (0)
- SSD @ 2,6V - Douwe01nl 17:47:28 11/02/11 (16)
- RE: SSD @ 2,6V - GStew 20:18:31 11/20/11 (1)
- RE: SSD @ 2,6V - Douwe01nl 14:07:34 11/23/11 (0)
- Ever thought about remote controlling the cMP setup through smart phone or tablet? - hfavandepas 12:26:32 11/03/11 (11)
- RE: Ever thought about remote controlling the cMP setup through smart phone or tablet? - Mihaylov 15:02:58 11/03/11 (10)
- RE: Ever thought about remote controlling the cMP setup through smart phone or tablet? - Douwe01nl 17:55:50 11/03/11 (9)
- RE: Ever thought about remote controlling the cMP setup through smart phone or tablet? - Ryelands 03:10:18 11/05/11 (2)
- RE: Ever thought about remote controlling the cMP setup through smart phone or tablet? - Douwe01nl 12:22:28 11/06/11 (1)
- RE: Ever thought about remote controlling the cMP setup through smart phone or tablet? - Ryelands 14:14:33 11/06/11 (0)
- RE: Ever thought about remote controlling the cMP setup through smart phone or tablet? - audiofanatic 23:17:42 11/04/11 (1)
- RE: Ever thought about remote controlling the cMP setup through smart phone or tablet? - Douwe01nl 11:06:46 11/05/11 (0)
- LAN - Mihaylov 18:22:48 11/03/11 (3)
- RE: LAN - Douwe01nl 16:34:50 11/04/11 (2)
- RE: LAN - Mihaylov 16:54:38 11/04/11 (1)
- RE: LAN cat 5E 4x2AWG#24. don't think it's shielded n/t - Douwe01nl 17:24:47 11/04/11 (0)
- I used to do that until my MB quit working - rickmcinnis@dogwoodfabrics.com 09:47:33 11/03/11 (1)
- RE: I used to do that until my MB quit working - Douwe01nl 18:00:41 11/03/11 (0)
- RE: cMP - the open source high-end Memory Player - audiofanatic 06:00:18 10/25/11 (3)
- RE: cMP - the open source high-end Memory Player - theob 06:08:45 10/25/11 (2)
- RE: cMP - the open source high-end Memory Player - audiofanatic 21:23:15 10/25/11 (1)
- RE: cMP - the open source high-end Memory Player - Dawnrazor 22:32:40 10/25/11 (0)
- Thank you Mihaylov, Gstew and Theob for the encouragement. SQ made an quantum leap. :-) - hfavandepas 13:10:42 10/24/11 (6)
- RE: Thank you Mihaylov, Gstew and Theob for the encouragement. SQ made an quantum leap. :-) - smicyta 23:24:59 10/31/11 (4)
- look in this post from Mihaylov - hfavandepas 01:29:00 11/01/11 (3)
- RE: look in this post from Mihaylov - smicyta 01:44:11 11/01/11 (2)
- never used the original regulator in a bypass situation. - hfavandepas 02:06:30 11/01/11 (1)
- RE: never used the original regulator in a bypass situation. - smicyta 03:42:56 11/01/11 (0)
- Congratulations! - Mihaylov 14:21:19 10/24/11 (0)
- Help on Latency readings - Win 7 vs XP (with UD2H/i-540) - Fork 11:43:05 10/19/11 (3)
- RE: Help on Latency readings - Win 7 vs XP (with UD2H/i-540) - Mihaylov 13:44:47 10/19/11 (2)
- RE: Help on Latency readings - Win 7 vs XP (with UD2H/i-540) - Fork 17:01:12 10/19/11 (1)
- RE: Help on Latency readings - Win 7 vs XP (with UD2H/i-540) - Mihaylov 17:36:16 10/19/11 (0)
- balanced cable Juli@ - audiofanatic 21:56:22 10/17/11 (0)
- Further Juli@ Follies... - GStew 18:17:53 10/13/11 (17)
- Juli@ @3,3v - Douwe01nl 11:10:24 02/08/12 (5)
- it works. I can confirm it. RE: Juli@ @3,3v - hfavandepas 13:52:09 02/08/12 (1)
- Great! we can save one psu on Juli@ if used digital only n/t - Douwe01nl 00:21:26 02/09/12 (0)
- RE: Juli@ @3,3v - theob 11:58:21 02/08/12 (0)
- RE: Juli@ @3,3v - theob 11:28:10 02/08/12 (1)
- Yes, LiFePo4 connected only 5v hole - Douwe01nl 11:43:17 02/08/12 (0)
- Extreme Juli@ Digital Section Mods - GStew 19:14:15 11/14/11 (8)
- Remove chips not needed for I2S connectivity - jackwong96 05:44:18 11/20/11 (7)
- I would like to think that I've been inspired by you! - GStew 15:30:59 11/20/11 (6)
- Thanks - jackwong96 08:52:54 11/21/11 (5)
- You are welcome... and I'm not sure the I2S... - GStew 10:26:39 11/21/11 (4)
- AK4114 required for Juli@ functioning... - GStew 16:58:14 12/02/11 (2)
- RE: AK4114 required for Juli@ functioning... - jackwong96 09:07:42 12/04/11 (1)
- I'm not sure what that'd be... - GStew 21:14:46 12/04/11 (0)
- Deep-Digital Circuit Bypassing... - GStew 21:39:00 11/24/11 (0)
- Removing chips - Douwe01nl 08:29:25 11/03/11 (2)
- RE: Removing chips - GStew 18:23:08 11/03/11 (1)
- RE: Removing chips - Douwe01nl 16:47:15 11/04/11 (0)
- A great potential clock find! - GStew 19:23:24 10/13/11 (3)
- RE: A great potential clock find! - Dawnrazor 22:19:40 10/14/11 (0)
- certainly a good price but ... - rickmcinnis@dogwoodfabrics.com 13:56:44 10/14/11 (1)
- All good clocks use crystals... - GStew 21:21:52 10/14/11 (0)
- Touch-screen driver doesn't work after minlogon implementation. - Islander7050 19:42:00 10/10/11 (0)
- Discrepancies in Bios/Cosmos menues from set-up?? - Julien43 06:51:43 10/10/11 (0)
- Every once in a while things go right. - theob 05:24:41 10/08/11 (0)
- Minlogon - why not implement it before optimizations ? - sernikus1 01:36:57 10/06/11 (3)
- Here is the order I just used - rickmcinnis@dogwoodfabrics.com 07:56:44 10/06/11 (2)
- RE: Here is the order I just used - Julien43 07:03:59 10/10/11 (1)
- WFP is windows file protection - rickmcinnis@dogwoodfabrics.com 08:32:26 10/10/11 (0)
- Latency Performance Issues - Intel i3 (35W) Build - Fork 12:03:24 10/05/11 (1)
- RE: Latency Performance Issues - Intel i3 (35W) Build - jackwong96 09:53:49 12/25/11 (0)
- RE: cMP - the open source high-end Memory Player - Fork 11:57:30 10/05/11 (0)
- Problem Juli@ - audiofanatic 22:44:04 10/04/11 (0)
- RE: Problem Juli@ - audiofanatic 21:31:43 10/05/11 (0)
- RE: Problem Juli@ - theob 04:11:52 10/05/11 (0)
- RE: Problem Juli@ - audiofanatic 05:10:49 10/05/11 (0)
- RE: cMP - the open source high-end Memory Player - jorget 20:40:13 09/14/11 (0)
- RAM downgrade... - Jolida 00:10:44 09/13/11 (0)
- That is wierd - I use 256K with no problems - rickmcinnis@dogwoodfabrics.com 08:38:23 09/13/11 (0)
- I made a mistake, it 512mB - rickmcinnis@dogwoodfabrics.com 10:06:56 09/16/11 (0)
- RE: That is wierd - I use 256K with no problems - theob 16:08:15 09/13/11 (0)
- You have to use ith with the MB setup after yours - rickmcinnis@dogwoodfabrics.com 07:54:36 09/14/11 (0)
- Calling all pico experts - theob 06:10:23 09/07/11 (0)
- I'm not sure this will do what you want... - GStew 19:33:31 09/07/11 (0)
- RE: I'm not sure this will do what you want... - theob 02:44:24 09/08/11 (0)
- Improving Hybrid Power Supply through filtering with coupled inductors. - hfavandepas 15:03:29 09/04/11 (0)
- RE: Improving Hybrid Power Supply through filtering with coupled inductors. - theob 10:44:35 09/05/11 (0)
- the cost arround 3 to 4 euros. Same for P4 extension cables. P24 ext cables cost 6 to 7 euros. - hfavandepas 15:37:30 09/05/11 (0)
- RE: Improving Hybrid Power Supply through filtering with coupled inductors. - smicyta 01:43:54 09/05/11 (0)
- I did desolder it. But the TTi linear PSU is still powering it right now - hfavandepas 02:36:53 09/05/11 (0)
- RE: I did desolder it. But the TTi linear PSU is still powering it right now - smicyta 23:53:24 09/07/11 (0)
- Definitely worth doing. But you also have too remove noisy (power) sources. - hfavandepas 01:48:36 09/08/11 (0)
- RE: Definitely worth doing. But you also have too remove noisy (power) sources. - smicyta 21:22:48 09/13/11 (0)
- RE: Definitely worth doing. But you also have too remove noisy (power) sources. - theob 05:00:49 09/08/11 (0)
- ZJYS51R5-2PT-01 - hfavandepas 08:12:33 09/08/11 (0)
- RE: ZJYS51R5-2PT-01 - theob 08:43:30 09/08/11 (0)
- RE: Improving Hybrid Power Supply through filtering with coupled inductors. - JBPZ 18:09:37 09/04/11 (0)
- specs are provided through the link in the orginal text (please read) - hfavandepas 01:10:21 09/05/11 (0)
- Ping for Mihaylov- Lynx mods - Dawnrazor 11:41:03 08/19/11 (0)
- My letters to you are perceived as spam - Mihaylov 18:04:49 09/14/11 (0)
- RE: My letters to you are perceived as spam - Dawnrazor 10:29:45 09/18/11 (0)
- RE: My letters to you are perceived as spam - Mihaylov 12:46:48 09/18/11 (0)
- Thanks for the link!! nt - Dawnrazor 19:44:06 09/18/11 (0)
- RE: Ping for Mihaylov- Lynx mods - Mihaylov 16:24:06 09/07/11 (0)
- RE: Ping for Mihaylov- Lynx mods - Mihaylov 15:55:56 08/19/11 (0)
- Question for all state side modders - theob 18:28:01 08/18/11 (0)
- Did you try Mouser.com or Partsconnexion.com?? nt - Dawnrazor 22:28:47 08/18/11 (0)
- RE: Did you try Mouser.com or Partsconnexion.com?? nt - theob 02:58:17 08/19/11 (0)
- Looking for SSD Brand/Model Recommendations - GStew 18:47:36 08/13/11 (0)
- RE: Looking for SSD Brand/Model Recommendations - theob 02:14:12 08/15/11 (0)
- RE: Looking for SSD Brand/Model Recommendations - audiodan@tiscali.it 05:23:24 08/15/11 (0)
- RE: Looking for SSD Brand/Model Recommendations - audiodan@tiscali.it 23:20:06 08/13/11 (0)
- Ferrite on P24 : a negative experience - audiodan@tiscali.it 17:03:17 08/10/11 (0)
- could this be because your DAC is inside the PC on a soundcard? - hfavandepas 03:32:57 08/11/11 (0)
- It could be ridicolous but true..... - audiodan@tiscali.it 09:17:58 08/11/11 (0)
- Maybe could be ridicolous but not completely true..... - audiodan@tiscali.it 11:22:29 08/11/11 (0)
- RE: Maybe could be ridicolous but not completely true..... - theob 11:37:34 08/11/11 (0)
- RE: Maybe could be ridicolous but not completely true..... - audiodan@tiscali.it 15:53:35 08/11/11 (0)
- Juli@ mod questions: BNC connector or Direct RCA? - ionian 09:45:04 08/05/11 (0)
- RE: cMP - the open source high-end Memory Player - bernard991 09:34:21 08/05/11 (0)
- Have a spare Gigabyte mobo to sell - theob 07:27:27 07/31/11 (0)
- OUCH !! Do Tell, So I Can Avoid Killing My GA-G31M-S2L Rig... - gjwAudio 14:27:17 07/31/11 (0)
- RE: OUCH !! Do Tell, So I Can Avoid Killing My GA-G31M-S2L Rig... - theob 15:06:54 07/31/11 (0)
- RE: Got a spare... - gjwAudio 15:40:27 07/31/11 (0)
- Sorry for the false alarm - rickmcinnis@dogwoodfabrics.com 07:21:40 07/26/11 (0)
- RE: Sorry for the false alarm - theob 16:54:59 07/26/11 (0)
- Looks like cics's site is down - rickmcinnis@dogwoodfabrics.com 14:27:39 07/25/11 (0)
- RE: Looks like cics's site is down - JBPZ 16:06:29 07/25/11 (0)
- Works for me! - Dawnrazor 16:22:11 07/25/11 (0)
- Suggestions welcome for modification U1 voltage regulator on the Juli@ digital part. - hfavandepas 13:57:34 07/25/11 (0)
- Question for Gstew - Jolida 03:41:39 08/23/11 (0)
- RE: Question for Gstew - GStew 20:28:34 08/28/11 (0)
- RE: Question for Gstew - Jolida 23:38:49 08/28/11 (0)
- RE: Question for Gstew - Jolida 23:27:03 08/23/11 (0)
- RE: Question for Gstew - GStew 20:33:23 08/28/11 (0)
- RE: Question for Gstew - Jolida 23:58:08 08/28/11 (0)
- RE: Question for Gstew - hfavandepas 09:30:24 08/23/11 (0)
- Mr. Mark - Jolida 05:07:54 08/25/11 (0)
- Juli@ Current Requirements... - GStew 20:43:21 08/28/11 (0)
- what makes you think the Tentlabs shunt regulator could power the P4 ? - hfavandepas 07:10:18 08/25/11 (0)
- RE: what makes you think the Tentlabs shunt regulator could power the P4 ? - Jolida 07:21:55 08/25/11 (0)
- Ow, I now see the mis-understanding. :-) - hfavandepas 07:56:02 08/25/11 (0)
- RE: Ow, I now see the mis-understanding. :-) - Jolida 08:54:46 08/25/11 (0)
- magnetic distortion from the transformer coils ? - hfavandepas 08:57:03 08/26/11 (0)
- RE: magnetic distortion from the transformer coils ? - Jolida 09:29:20 08/26/11 (0)
- I'm not an expert. I don't know. Other more knowledgeable inmates better should comment on this. - hfavandepas 10:50:38 08/26/11 (0)
- RE: magnetic distortion from the transformer coils ? - Ryelands 10:23:52 08/26/11 (0)
- RE: magnetic distortion from the transformer coils ? - Jolida 10:49:00 08/26/11 (0)
- Another several thoughts... (and if you don't believe in tweaking, I suggest you don't read this post!) - GStew 18:55:41 08/29/11 (0)
- RE: Another several thoughts... (and if you don't believe in tweaking, I suggest you don't read this post!) - Jolida 01:31:42 08/30/11 (0)
- RE: Question for Gstew - Jolida 11:33:01 08/24/11 (0)
- RE: Suggestions welcome for modification U1 voltage regulator on the Juli@ digital part. - GStew 20:43:10 07/26/11 (0)
- RE: Suggestions welcome for modification U1 voltage regulator on the Juli@ digital part. - theob 05:34:04 07/27/11 (0)
- RE: Suggestions welcome for modification U1 voltage regulator on the Juli@ digital part. - audiodan@tiscali.it 02:27:36 07/26/11 (0)
- RE: Suggestions welcome for modification U1 voltage regulator on the Juli@ digital part. - theob 11:50:23 07/26/11 (0)
- RE: Suggestions welcome for modification U1 voltage regulator on the Juli@ digital part. - theob 14:12:54 07/25/11 (0)
- RE: Suggestions welcome for modification U1 voltage regulator on the Juli@ digital part. - JBPZ 23:21:03 07/25/11 (0)
- RE: Suggestions welcome for modification U1 voltage regulator on the Juli@ digital part. - theob 11:34:09 07/26/11 (0)
- Issue with CMP & Windows 7 : Unable to get Acess priviledges - Laurent D. 13:51:45 07/23/11 (0)
- RE: Issue with CMP & Windows 7 : Unable to get Acess priviledges - Bibo01 00:56:08 07/24/11 (0)
- RE: Issue with CMP & Windows 7 : Unable to get Acess priviledges - Laurent D. 14:25:15 07/24/11 (0)
- RME Card Problem again - play-mate 06:15:27 07/18/11 (0)
- Ferrite/cap filter on the P24: next best thing too a full linear cMP setup? (interim report) - hfavandepas 02:09:29 07/07/11 (13)
- RE: Ferrite/cap filter on the P24: next best thing too a full linear cMP setup? (interim report) - Jolida 04:20:08 08/26/11 (0)
- for filtering only: you don't need the 4700 bulk cap. - hfavandepas 09:52:34 08/26/11 (0)
- Would you like some oscons with those ferrites? A big yes - theob 14:14:29 08/25/11 (0)
- Love too hear this. - hfavandepas 01:33:23 08/26/11 (0)
- RE: Love too hear this. - theob 02:30:28 08/26/11 (0)
- RE: Ferrite/cap filter on the P24: next best thing too a full linear cMP setup? (interim report) - theob 06:43:39 08/08/11 (0)
- My experience so far with ferrite/cap filters on the P24 and P4 - hfavandepas 09:34:52 08/08/11 (0)
- RE: My experience so far with ferrite/cap filters on the P24 and P4 - theob 06:01:39 08/13/11 (0)
- Picture of caps soldered on too P24 connector on the P24 extension cable - hfavandepas 06:36:31 08/13/11 (0)
- RE: Picture of caps soldered on too P24 connector on the P24 extension cable - theob 13:56:48 08/13/11 (0)
- I used a 'Stanley knife'. - hfavandepas 14:56:24 08/13/11 (0)
- RE: I used a 'Stanley knife'. - theob 07:28:42 08/14/11 (0)
- Good too hear you finally got results! Don't forget the P4 - hfavandepas 02:21:17 08/17/11 (0)
- RE: Good too hear you finally got results! Don't forget the P4 - theob 05:29:58 08/17/11 (0)
- Big difference between stuffing caps and soldering same onto p24 - theob 10:46:34 08/14/11 (0)
- RE: I used a 'Stanley knife'. - theob 15:09:24 08/13/11 (0)
- RE: Picture of caps soldered on too P24 connector on the P24 extension cable - theob 07:18:14 08/13/11 (0)
- RE: My experience so far with ferrite/cap filters on the P24 and P4 - theob 12:56:13 08/08/11 (0)
- I simply use ordinairy line filters. The can be found everywhere. - hfavandepas 02:22:08 08/10/11 (0)
- RE: I simply use ordinairy line filters. The can be found everywhere. - theob 07:51:26 08/10/11 (0)
- Ok I hear you about adding caps - theob 07:41:38 07/09/11 (0)
- so there is definitely noise traveling on the S/Pdif - hfavandepas 12:40:32 07/10/11 (0)
- RE: so there is definitely noise traveling on the S/Pdif - theob 17:33:10 07/10/11 (0)
- RE: Ferrite/cap filter on the P24: next best thing too a full linear cMP setup? (interim report) - audiodan@tiscali.it 15:32:23 07/08/11 (0)
- What is a pgreek filter? google-ing returned no results - hfavandepas 16:40:56 07/08/11 (0)
- RE: What is a pgreek filter? google-ing returned no results - audiodan@tiscali.it 23:00:36 07/08/11 (0)
- okay i'll try with the Pico PW-200-M - hfavandepas 06:48:18 07/10/11 (0)
- RE: okay i'll try with the Pico PW-200-M - audiodan@tiscali.it 12:41:31 07/10/11 (0)
- A Pico uses a switching frequency of 300kHz. (see specs LM2642MTC chip) - hfavandepas 16:00:00 07/24/11 (0)
- RE: A Pico uses a switching frequency of 300kHz. (see specs LM2642MTC chip) - audiodan@tiscali.it 16:11:37 07/27/11 (0)
- RE: Ferrite/cap filter on the P24: next best thing too a full linear cMP setup? (interim report) - JBPZ 05:16:12 07/08/11 (0)
- What regulators do you mean? - hfavandepas 09:25:34 07/08/11 (0)
- RE: What regulators do you mean? - JBPZ 10:52:01 07/08/11 (0)
- Some food for thought about LAN connections through this nice little experiment with your android phone - hfavandepas 09:30:44 06/27/11 (0)
- RE: Some food for thought about LAN connections through this nice little experiment with your android phone - audiodan@tiscali.it 13:23:43 07/04/11 (0)
- Sorry but I'm affraid I can't be of much help with how to use WiFi LAN through an USB dongle - hfavandepas 03:56:06 07/05/11 (0)
- The DEQX alternative : cMP with X-overs and FIR - play-mate 04:58:46 06/26/11 (0)
- RE: The DEQX alternative : cMP with X-overs and FIR - theob 05:40:50 06/26/11 (0)
- RE: The DEQX alternative : cMP with X-overs and FIR - play-mate 05:50:54 06/26/11 (0)
- Any Juli@ / Buffalo users considering an ExaU21 as a Juli@ replacement. - theob 12:39:48 06/24/11 (0)
- ExaU21 as a Juli@ replacement. - play-mate 04:37:58 06/26/11 (0)
- RE: ExaU21 as a Juli@ replacement. - theob 05:37:31 06/26/11 (0)
- RE: ExaU21 as a Juli@ replacement. - play-mate 06:04:57 06/26/11 (0)
- RE: ExaU21 as a Juli@ replacement. - theob 08:17:32 06/26/11 (0)
- RE: ExaU21 as a Juli@ replacement. - play-mate 08:33:13 06/26/11 (0)
- RE: ExaU21 as a Juli@ replacement. - theob 08:37:18 06/26/11 (0)
- Another Goldberg's variation on linear PSU theme ( with Belleson regulators) - audiodan@tiscali.it 16:12:21 06/19/11 (7)
- Xonar Analog or External DAC ??? - EmailTim 16:32:32 07/28/11 (2)
- RE: Xonar Analog or External DAC ??? - audiodan@tiscali.it 07:21:33 05/28/13 (0)
- RE: Xonar Analog or External DAC ??? - audiodan@tiscali.it 16:30:02 08/01/11 (0)
- RE: Another Goldberg's variation on linear PSU theme ( with Belleson regulators) - nagual19 02:29:12 07/01/11 (0)
- RE: Another Goldberg's variation on linear PSU theme ( with Belleson regulators) - audiodan@tiscali.it 13:31:28 07/02/11 (0)
- RE: Another Goldberg's variation on linear PSU theme ( with Belleson regulators) - audiodan@tiscali.it 22:11:21 06/19/11 (0)
- RE: Another Goldberg's variation on linear PSU theme ( with Belleson regulators) - theob 16:22:07 06/19/11 (0)
- How to kill "cicsRemote.exe" - play-mate 00:47:46 06/12/11 (0)
- RE: How to kill "cicsRemote.exe" - Ryelands 04:01:23 06/12/11 (0)
- RE: How to kill "cicsRemote.exe" - play-mate 05:51:09 06/12/11 (0)
- RE: How to kill "cicsRemote.exe" - Ryelands 06:49:32 06/12/11 (0)
- Deleting it helped ! N/T - play-mate 11:03:23 06/13/11 (0)
- RE: Deleting it helped ! N/T - theob 06:55:28 06/15/11 (0)
- Helpdesk : RME Soundcard not recognized - play-mate 09:01:34 06/08/11 (0)
- RME problem solved - play-mate 08:18:00 06/11/11 (0)
- RE: Helpdesk : RME Soundcard not recognized - Bibo01 11:51:15 06/08/11 (0)
- WHAT ???? - play-mate 16:50:04 06/08/11 (0)
- RE: WHAT ???? - Bibo01 22:53:10 06/08/11 (0)
- RE: Helpdesk : RME Soundcard not recognized - hfavandepas 10:14:47 06/08/11 (0)
- RE: Helpdesk : RME Soundcard not recognized - Ryelands 11:01:27 06/08/11 (0)
- Another Linear Supply sees the light of day! - Audio Bling 23:12:51 06/07/11 (0)
- indeed very nice and very informative post too. thank you for that. - hfavandepas 05:44:40 06/09/11 (0)
- RE: indeed very nice and very informative post too. thank you for that. - Audio Bling 08:50:51 06/09/11 (0)
- RE: indeed very nice and very informative post too. thank you for that. - Ryelands 09:24:43 06/09/11 (0)
- Very nice post! - theob 04:12:19 06/08/11 (0)
- Effect of ferrite beads on dc power lines too P24, P4 and/or too Pico PSU’s - hfavandepas 15:03:22 05/27/11 (66)
- Easy ferrite tweak using granite digital power supplies - theob 06:44:06 12/11/11 (0)
- Joining the Ferrite Party - dumpingground 14:32:52 08/05/11 (0)
- Some more follow-up on ferrites - theob 06:02:28 06/30/11 (0)
- Thank you for feedback. Are you sure you don't want too experiment with caps + ferrits? (last try) - hfavandepas 09:13:12 06/30/11 (0)
- RE: Thank you for feedback. Are you sure you don't want too experiment with caps + ferrits? (last try) - theob 09:39:07 06/30/11 (0)
- RE: Thank you for feedback. Are you sure you don't want too experiment with caps + ferrits? (last try) - hfavandepas 10:21:08 06/30/11 (0)
- RE: Thank you for feedback. Are you sure you don't want too experiment with caps + ferrits? (last try) - theob 11:24:57 06/30/11 (0)
- that thread was about use of ferrites on usb and/or spdif signals. - hfavandepas 12:07:31 06/30/11 (0)
- RE: that thread was about use of ferrites on usb and/or spdif signals. - Dawnrazor 12:30:05 06/30/11 (0)
- It’s an Enermax. RME used too recommend them. - hfavandepas 13:07:29 06/30/11 (0)
- Mark I just realized you run 100 mhz speed....wow! - theob 18:50:34 06/24/11 (0)
- Really don't know. May be it's caused by the Audyn bipol elco caps for speaker crossovers. I have no clue. - hfavandepas 05:57:33 06/25/11 (0)
- RE: Really don't know. May be it's caused by the Audyn bipol elco caps for speaker crossovers. I have no clue. - theob 06:24:04 06/25/11 (0)
- RE: Really don't know. May be it's caused by the Audyn bipol elco caps for speaker crossovers. I have no clue. - theob 07:59:46 06/25/11 (0)
- It's not the caps in the Juli@ + First impressions on: Ferrites & decoupling caps - hfavandepas 04:42:03 06/26/11 (0)
- RE: It's not the caps in the Juli@ + First impressions on: Ferrites & decoupling caps - theob 08:35:03 06/26/11 (0)
- What a coincidence: I did exactly the same this afternoon. With same results. - hfavandepas 11:00:27 06/26/11 (0)
- RE: What a coincidence: I did exactly the same this afternoon. With same results. - theob 15:47:25 06/26/11 (0)
- RE: What a coincidence: I did exactly the same this afternoon. With same results. - theob 16:12:11 06/26/11 (0)
- If you like tweaking: I have 3 new ones for you too try if you like. - hfavandepas 14:57:27 06/28/11 (0)
- RE: If you like tweaking: I have 3 new ones for you too try if you like. - theob 16:33:30 06/28/11 (0)
- RE: It's not the caps in the Juli@ + First impressions on: Ferrites & decoupling caps - theob 05:34:37 06/26/11 (0)
- Ow, I forgot. I use a G41M-ES2L. - hfavandepas 06:28:31 06/25/11 (0)
- Initial results/ impressions after one day, with a lot of questions still too be answered) - hfavandepas 08:57:58 06/02/11 (0)
- RE: Initial results/ impressions after one day, with a lot of questions still too be answered) - Dawnrazor 04:40:43 06/25/11 (0)
- I ordered these 3 types. see text - hfavandepas 07:29:01 06/25/11 (0)
- Interesting results indeed - theob 09:10:06 06/02/11 (0)
- did you made any progress with the use of ferrites on the P24? - hfavandepas 08:09:51 06/09/11 (0)
- Fantastic - theob 03:55:22 06/11/11 (0)
- May be ferrite beads should be part of the standard cMP recipe. But what is the easiest way too clamp the P24 - hfavandepas 05:57:09 06/11/11 (0)
- RE: May be ferrite beads should be part of the standard cMP recipe. But what is the easiest way too clamp the P24 - theob 06:13:25 06/11/11 (0)
- P24 current measurements on individual wires ( on GA G41M-ES2L mobo) - hfavandepas 06:45:40 06/14/11 (0)
- RE: P24 current measurements on individual wires ( on GA G41M-ES2L mobo) - theob 07:47:29 06/14/11 (0)
- I didn't measure per wire with the G31M. sorry - hfavandepas 09:04:59 06/14/11 (0)
- RE: I didn't measure per wire with the G31M. sorry - theob 10:23:15 06/14/11 (0)
- I'm now on my 6th ferrite on p24 on the P24... - theob 10:17:54 06/10/11 (0)
- I'm now on my 6th ferrite on p24 on the P24... - theob 04:52:04 06/10/11 (0)
- What is your ‘clamping strategy’ too keep DC & Low Frequency AC Bias Effects lowest possible? - hfavandepas 05:27:32 06/10/11 (0)
- RE: What is your ‘clamping strategy’ too keep DC & Low Frequency AC Bias Effects lowest possible? - theob 07:21:04 06/10/11 (0)
- What combination of individual P24 wires can/will result in a ‘zero net magnetic flux density’? - hfavandepas 08:16:45 06/10/11 (0)
- RE: What combination of individual P24 wires can/will result in a ‘zero net magnetic flux density’? - theob 08:42:54 06/10/11 (0)
- RE: did you made any progress with the use of ferrites on the P24? - kclo 02:14:22 06/10/11 (0)
- Trying it now - theob 09:16:34 06/09/11 (0)
- RE: Trying it now - theob 09:53:05 06/09/11 (0)
- Still rocking. And even better with caps in place ! (see picture) - hfavandepas 13:47:04 06/23/11 (0)
- I use a p24 extension cable. that makes paring easy. - hfavandepas 09:43:54 06/02/11 (0)
- Question of shared lines and degree ??? - EmailTim 20:36:50 06/01/11 (0)
- Initial results/ impressions after one day. (With lots of questions still too be answered) - hfavandepas 08:32:10 06/02/11 (0)
- RE: Effect of ferrite beads on dc power lines too P24, P4 and/or too Pico PSU’s - GStew 11:52:07 05/28/11 (0)
- RE: Effect of ferrite beads on dc power lines too P24, P4 and/or too Pico PSU’s - hfavandepas 09:16:11 05/29/11 (0)
- RE: Effect of ferrite beads on dc power lines too P24, P4 and/or too Pico PSU’s - Dawnrazor 11:33:47 05/29/11 (0)
- I think that was me. - hfavandepas 16:50:37 05/29/11 (0)
- RE: Effect of ferrite beads on dc power lines too P24, P4 and/or too Pico PSU’s - theob 06:16:40 05/28/11 (9)
- Found the missing Ferrite bead: I can replicate your listening experience ! - hfavandepas 11:21:43 05/30/11 (4)
- RE: Found the missing Ferrite bead: I can replicate your listening experience ! - theob 04:08:23 05/31/11 (0)
- RE: Found the missing Ferrite bead: I can replicate your listening experience ! - theob 16:47:44 05/31/11 (0)
- That sounds encouraging.. !! - hfavandepas 17:43:58 05/31/11 (0)
- RE: That sounds encouraging.. !! - theob 03:41:01 06/01/11 (0)
- Here is the part number of the ferrite clamps I used - theob 11:10:06 06/01/11 (0)
- RE: Found the missing Ferrite bead: I can replicate your listening experience ! - Bibo01 13:17:17 05/30/11 (0)
- May be you mean: saturation by a large DC magnitizing force ? - hfavandepas 17:10:18 05/30/11 (0)
- Always good too try your suggestion. But I’m sceptical towards that claim. - hfavandepas 13:56:34 05/30/11 (0)
- Size matters ... - EmailTim 23:56:07 05/28/11 (0)
- RE: Size matters ... - hfavandepas 03:11:33 05/29/11 (0)
- Thank you. You might find these articles interesting too - hfavandepas 07:27:09 05/28/11 (0)
- RE: Thank you. You might find these articles interesting too - theob 08:01:52 05/28/11 (0)
- New Bios Setting of Sandy Bridge cMP2 - audiodan@tiscali.it 15:25:35 05/09/11 (0)
- RE: New Bios Setting of Sandy Bridge cMP2 - audiodan@tiscali.it 15:53:50 05/10/11 (0)
- RE: New Bios Setting of Sandy Bridge cMP2 - Mihaylov 17:58:19 05/09/11 (0)
- RE: cMP - the open source high-end Memory Player - golo 18:39:03 05/08/11 (0)
- RE: cMP - the open source high-end Memory Player - golo 20:40:09 05/08/11 (0)
- RE: cMP - the open source high-end Memory Player - Dawnrazor 00:21:30 05/10/11 (0)
- RE: to helpfulDawnrazor - golo 19:54:39 05/10/11 (0)
- RE: to helpfulDawnrazor - Dawnrazor 20:48:08 05/10/11 (0)
- RE: to helpfulDawnrazor - golo 01:14:22 05/11/11 (0)
- RE: to helpfulDawnrazor - Dawnrazor 04:43:58 05/11/11 (0)
- RE: cMP - the open source high-end Memory Player - Bibo01 00:38:55 05/10/11 (0)
- RE: cMP - the open source high-end Memory Player - Dawnrazor 09:14:37 05/10/11 (0)
- Intel i3 2100T for the Sandy Bridge cMP2 - audiodan@tiscali.it 14:51:26 05/08/11 (0)
- Did you F1 in BIOS for more choicces? - rickmcinnis@dogwoodfabrics.com 11:26:11 05/09/11 (0)
- RE: Did you F1 in BIOS for more choicces? - audiodan@tiscali.it 22:31:39 05/10/11 (0)
- Maybe there is not an F1 for more choices here - rickmcinnis@dogwoodfabrics.com 11:46:22 05/09/11 (0)
- RE: Maybe there is not an F1 for more choices here - Bibo01 22:38:30 05/09/11 (0)
- RE: Maybe there is not an F1 for more choices here - Mihaylov 14:32:10 05/10/11 (0)
- Thanks for the prompt! - rickmcinnis@dogwoodfabrics.com 14:08:19 05/10/11 (0)
- Looks like it offers very little BIOS flexability - rickmcinnis@dogwoodfabrics.com 14:19:52 05/10/11 (0)
- HA65M-D2h-B3 looks like a better choice - rickmcinnis@dogwoodfabrics.com 14:29:44 05/10/11 (0)
- RE: Intel i3 2100T for the Sandy Bridge cMP2 - Mihaylov 05:37:24 05/09/11 (0)
- RE: Intel i3 2100T for the Sandy Bridge cMP2 - Bibo01 22:40:18 05/08/11 (0)
- So how do you output Audio without a PCI Soundcard? - ArdRi 15:23:18 05/08/11 (0)
- RE: So how do you output Audio without a PCI Soundcard? - audiodan@tiscali.it 15:43:44 05/08/11 (0)
- RE: So how do you output Audio without a PCI Soundcard? - EmailTim 18:47:11 05/16/11 (0)
- RE: So how do you output Audio without a PCI Soundcard? - audiodan@tiscali.it 13:05:58 05/22/11 (0)
- Kernel Optimization: "It's Not Just For Listening" - gjwAudio 13:14:19 05/07/11 (0)
- RE: Kernel Optimization: "It's Not Just For Listening" - chevron 03:07:29 05/22/11 (0)
- RE: Sample File Listening Test... - gjwAudio 22:48:00 05/24/11 (0)
- RE: Kernel Optimization: "It's Not Just For Listening" - chevron 09:03:07 05/16/11 (0)
- RE: Could not download files - gjwAudio 23:30:41 05/16/11 (0)
- RE: Could not download files - chevron 09:39:57 05/17/11 (0)
- RE: Kernel Optimization: "It's Not Just For Listening" - theob 15:20:17 05/07/11 (0)
- Preferred Juli@ Driver as of 2011-05-04 - GStew 13:28:50 05/06/11 (0)
- Using 1.07 for so long - rickmcinnis@dogwoodfabrics.com 09:49:36 05/08/11 (0)
- RE: Preferred Juli@ Driver as of 2011-05-04 - theob 16:50:38 05/06/11 (0)
- ... and other stuff too! - GStew 13:46:51 05/06/11 (0)
- Why don´t they all get it ? - play-mate 09:42:05 05/02/11 (12)
- RE: Why don´t they all get it ? - golo 20:03:28 05/10/11 (7)
- RE: Why don´t they all get it ? - play-mate 01:31:45 05/11/11 (6)
- They are lazy - rickmcinnis@dogwoodfabrics.com 13:47:59 05/03/11 (0)
- RE: Why don´t they all get it ? - Dawnrazor 09:46:45 05/03/11 (0)
- RE: Why don´t they all get it ? - Ryelands 11:39:58 05/03/11 (0)
- RE: Why don´t they all get it ? - Bibo01 10:41:40 05/02/11 (0)
- Kernel Optimization: /timeres Redux... - gjwAudio 16:13:18 04/22/11 (0)
- RE: Kernel Optimization: /timeres Redux... - audiodan@tiscali.it 00:36:55 05/01/11 (0)
- I tried this..Ithink its MAJOR..:) - ArdRi 18:03:48 04/22/11 (0)
- RE: I tried this..Ithink its MAJOR..:) - wlowes 21:25:32 05/20/11 (0)
- Nice find! I've used "/UsePMTimer" in boot.ini for a week now - there's improvement. - cics 06:07:09 05/02/11 (0)
- RE: Nice find! I've used "/UsePMTimer" in boot.ini for a week now - there's improvement. - theob 08:00:57 05/02/11 (0)
- RE: Nice find! I've used "/UsePMTimer" in boot.ini for a week now - there's improvement. - audiodan@tiscali.it 21:39:39 05/05/11 (0)
- Linear psu question - Jolida 02:15:29 04/19/11 (0)
- RE: Linear psu question - Mihaylov 14:30:12 04/21/11 (0)
- "/UsePMTimer", Hotfixes 835730, 895980 & 896256, Intel Core 2 Duo, XP-SP2/SP3 Redux... - gjwAudio 14:05:46 04/14/11 (0)
- Using the HPETimer or the TSC timer and throttling the processor spreed. - hfavandepas 11:23:17 04/18/11 (0)
- So Many Timers... So Little Guidance... - gjwAudio 12:51:24 04/22/11 (0)
- some guys at the Slysoft forum tried and measured it with reclock.: No HPET support in XP - hfavandepas 15:14:30 05/16/11 (0)
- It's really simple. - theob 14:47:42 04/14/11 (0)
- RE: It's (never) really (that) simple... - gjwAudio 15:04:51 04/16/11 (0)
- RE: It's (never) really (that) simple... - theob 06:43:25 04/17/11 (0)
- Crystal tweak for horizontal motherboards - rickmcinnis@dogwoodfabrics.com 09:08:55 04/14/11 (0)
- RME cards - workaround or not? - Eunegis 09:34:11 04/11/11 (0)
- RE: RME cards - workaround or not? - Eunegis 08:39:46 04/12/11 (0)
- Keyboard and Soundcard - TMASLAR 08:37:47 04/10/11 (0)
- RE: Keyboard and Soundcard - tsearay 14:19:17 04/11/11 (0)
- RE: Keyboard and Soundcard - tmmaslar 18:12:51 04/11/11 (0)
- You usually need either type Keyboard to input the Key.n/t - ArdRi 13:56:26 04/10/11 (0)
- cMP - can't get it to work!!! - Eunegis 11:25:49 04/01/11 (0)
- RE: cMP - can't get it to work!!! - audiodan@tiscali.it 00:23:09 04/10/11 (0)
- RE: cMP - can't get it to work!!! - audiodan@tiscali.it 13:12:48 04/10/11 (0)
- RE: cMP - can get it to work with JRiver meanwhile - Eunegis 01:59:45 04/10/11 (0)
- RE: cMP - can get it to work with JRiver meanwhile - Dawnrazor 06:33:32 04/10/11 (0)
- RE: cMP - impossible with Cantatis - other solution... - Eunegis 09:20:08 04/10/11 (0)
- RE: cMP - impossible with Cantatis - other solution... - Dawnrazor 13:22:39 04/10/11 (0)
- RE: cMP - impossible with Cantatis - other solution... - Eunegis 14:22:17 04/10/11 (0)
- RE: cMP - impossible with Cantatis - other solution... - Bibo01 23:05:33 04/10/11 (0)
- RE: cMP - impossible with Cantatis - other solution... - Eunegis 23:23:14 04/10/11 (0)
- RE: cMP - impossible with Cantatis - other solution... - Dawnrazor 00:00:37 04/11/11 (0)
- RE: cMP - impossible with Cantatis - other solution... - Bibo01 23:56:38 04/10/11 (0)
- RE: cMP - impossible with Cantatis - other solution... - Eunegis 01:03:11 04/11/11 (0)
- RE: cMP - can't get it to work!!! - Dawnrazor 22:39:35 04/01/11 (0)
- RE: cMP - can't get it to work!!! - Eunegis 00:13:38 04/02/11 (0)
- RE: cMP - can't get it to work!!! - Dawnrazor 19:52:04 04/02/11 (0)
- RE: cMP - can't get it to work PROPERLY - Eunegis 11:21:43 04/03/11 (0)
- RE: cMP - can't get it to work PROPERLY - smicyta 01:37:43 04/04/11 (0)
- RE: cMP - can't get it to work PROPERLY - Eunegis 02:04:10 04/04/11 (0)
- RE: cMP - can't get it to work PROPERLY - Eunegis 09:54:22 04/04/11 (0)
- RE: cMP - can't get it to work PROPERLY - Dawnrazor 08:22:38 04/05/11 (0)
- RE: cMP - can't get it to work PROPERLY - theob 06:37:58 04/06/11 (0)
- RE: cMP - can't get it to work PROPERLY - Bibo01 07:19:53 04/06/11 (0)
- RE: cMP - can't get it to work PROPERLY - Dawnrazor 21:36:13 04/06/11 (0)
- RE: cMP - can't get it to work PROPERLY - Bibo01 22:23:21 04/06/11 (0)
- RE: cMP - can't get it to work PROPERLY - Dawnrazor 23:15:28 04/06/11 (0)
- RE: cMP - can't get it to work PROPERLY - Eunegis 04:43:48 04/07/11 (0)
- RE: cMP - can't get it to work PROPERLY - Dawnrazor 21:47:04 04/07/11 (0)
- RE: cMP - can't get it to work PROPERLY - Eunegis 09:27:51 04/05/11 (0)
- RE: cMP - can't get it to work PROPERLY - Dawnrazor 21:35:02 04/06/11 (0)
- RE: cMP - can't get it to work PROPERLY - Eunegis 01:22:01 04/07/11 (0)
- RE: cMP - can't get it to work PROPERLY - Dawnrazor 23:48:18 04/03/11 (0)
- RE: cMP - can't get it to work PROPERLY - Eunegis 00:15:53 04/04/11 (0)
- RE: cMP - can't get it to work PROPERLY - smicyta 20:43:31 04/04/11 (0)
- RE: cMP - slowly changing states - but still no success - Eunegis 02:34:30 04/05/11 (0)
- RE: cMP - slowly changing states - but still no success - smicyta 03:10:39 04/06/11 (0)
- RE: cMP - slowly changing states - but still no success - Eunegis 01:23:59 04/07/11 (0)
- RE: cMP - slowly changing states - but still no success - smicyta 19:11:39 04/08/11 (0)
- RE: cMP - stagnation - and THAT is the Problem! - Eunegis 00:30:10 04/09/11 (0)
- RE: cMP - stagnation - and THAT is the Problem! - Dawnrazor 08:00:56 04/09/11 (0)
- RE: cMP - stagnation - and THAT is the Problem! - Eunegis 13:24:53 04/09/11 (0)
- RE: cMP - stagnation - and THAT is the Problem! - Eunegis 11:59:39 04/09/11 (0)
- RE: cMP - can't get it to work PROPERLY - theob 12:19:31 04/03/11 (0)
- RE: cMP - can't get it to work PROPERLY - Eunegis 14:26:47 04/03/11 (0)
- RE: cMP - can't get it to work!!! - Eunegis 05:28:56 04/03/11 (0)
- RE: cMP - can't get it to work!!! - Eunegis 02:00:26 04/02/11 (0)
- RE: cMP - the open source high-end Memory Player - Forart.eu 03:43:33 03/22/11 (0)
- RE: cMP - the open source high-end Memory Player - internethandle 16:33:44 03/30/11 (0)
- RE: cMP - the open source high-end Memory Player-Newbie Question - TMASLAR 16:37:49 03/15/11 (0)
- RE: cMP - the open source high-end Memory Player-Newbie Question - play-mate 19:10:38 03/15/11 (0)
- RE: cMP - the open source high-end Memory Player-Newbie Question - TMASLAR 21:00:20 03/15/11 (0)
- RE: cMP - the open source high-end Memory Player-Newbie Question - Dawnrazor 22:37:34 03/16/11 (0)
- RE: cMP - the open source high-end Memory Player-Newbie Question - TMASLAR 16:05:42 03/17/11 (0)
- RE: cMP - the open source high-end Memory Player-Newbie Question - Dawnrazor 17:39:05 03/17/11 (0)
- RE: cMP - the open source high-end Memory Player-Newbie Question - TMASLAR 20:46:04 03/17/11 (0)
- RE: cMP - the open source high-end Memory Player-Newbie Question - Dawnrazor 21:53:41 03/17/11 (0)
- RE: cMP - the open source high-end Memory Player-Newbie Question - TMASLAR 22:23:28 03/17/11 (0)
- RE: cMP - the open source high-end Memory Player-Newbie Question - TMASLAR 20:44:12 03/15/11 (0)
- Juli@ lost driver - ecir38 09:23:22 03/15/11 (0)
- RE: Juli@ lost driver - Ryelands 11:21:17 03/15/11 (0)
- RE: Juli@ lost driver - ecir38 12:05:23 03/15/11 (0)
- RE: Juli@ lost driver - Ryelands 12:29:32 03/15/11 (0)
- RE: Juli@ lost driver - theob 16:55:48 03/15/11 (0)
- RE: Juli@ lost driver - ecir38 06:24:39 03/16/11 (0)
- RE: Juli@ lost driver - theob 06:36:39 03/16/11 (0)
- RE: Juli@ lost driver - ecir38 07:21:05 03/16/11 (0)
- RE: Juli@ lost driver - theob 07:31:48 03/16/11 (0)
- RE: Juli@ lost driver - ecir38 08:18:28 03/17/11 (0)
- Upsampling to 132.3 or 144 Khz - mandel 12:42:39 03/10/11 (0)
- RE: Upsampling to 132.3 or 144 Khz - cPlay will accept these sample rates - cics 07:19:19 03/12/11 (0)
- Thanks for the help I got it sorted out - Dawnrazor 00:31:08 03/10/11 (0)
- RE: Thanks for the help I got it sorted out - play-mate 08:51:16 03/10/11 (0)
- RE: Thanks for the help I got it sorted out - Dawnrazor 11:15:24 03/10/11 (0)
- Newbie questions, etc. - internethandle 01:09:51 03/09/11 (0)
- Also have a question about ADuM4160 isolator - internethandle 15:42:32 03/09/11 (0)
- RE: Also have a question about ADuM4160 isolator - Ryelands 00:39:52 03/10/11 (0)
- RE: Also have a question about ADuM4160 isolator - kclo 02:09:05 07/25/11 (0)
- RE: Also have a question about ADuM4160 isolator - Ryelands 04:58:43 07/25/11 (0)
- RE: Also have a question about ADuM4160 isolator - kclo 05:14:44 07/25/11 (0)
- RE: Also have a question about ADuM4160 isolator - Ryelands 06:08:00 07/25/11 (0)
- RE: Also have a question about ADuM4160 isolator - kclo 05:40:07 07/26/11 (0)
- RE: Also have a question about ADuM4160 isolator - kclo 15:24:50 07/25/11 (0)
- You can set Foobar to open from cMP - ArdRi 11:43:38 03/09/11 (0)
- RE: You can set Foobar to open from cMP - internethandle 15:35:56 03/09/11 (0)
- Can one use audio from a BluRay disk w/cMP? - rickmcinnis@dogwoodfabrics.com 10:49:39 03/04/11 (0)
- RE: Can one use audio from a BluRay disk w/cMP? - theob 09:22:24 03/06/11 (0)
- any audible difference between using the (default) TSC timer or the PM timer? - hfavandepas 13:02:58 03/01/11 (0)
- RE: any audible difference between using the (default) TSC timer or the PM timer? - rhin0z15 12:34:09 03/07/11 (0)
- RE: any audible difference between using the (default) TSC timer or the PM timer? - rhin0z15 12:10:55 03/07/11 (0)
- that is not correct. Please read Microsoft help pages more carefull. Or do some Googling.nt - hfavandepas 12:15:27 03/07/11 (0)
- RE: that is not correct. Please read Microsoft help pages more carefull. Or do some Googling.nt - rhin0z15 13:00:28 03/07/11 (0)
- Ok I'm keepin pm timer - theob 06:29:31 03/06/11 (0)
- RE: any audible difference between using the (default) TSC timer or the PM timer? - theob 13:55:21 03/04/11 (0)
- RE: any audible difference between using the (default) TSC timer or the PM timer? - theob 06:16:58 03/03/11 (0)
- I hear the same - hfavandepas 06:57:26 03/03/11 (0)
- RE: I hear the same - theob 07:54:49 03/03/11 (0)
- don't know yet - hfavandepas 09:04:52 03/03/11 (0)
- RE: any audible difference between using the (default) TSC timer or the PM timer? - theob 17:34:51 03/01/11 (0)
- Yes I tried, but.... - hfavandepas 13:04:41 03/02/11 (0)
- RE: Yes I tried, but.... - theob 05:46:36 03/03/11 (0)
- Cmp2 lynx users (allocator too) with new 32mm HELP! - Dawnrazor 16:37:58 02/26/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - tsearay 22:53:46 03/01/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - Dawnrazor 22:59:54 03/01/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - tsearay 16:01:53 03/02/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - Dawnrazor 16:20:20 03/02/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - tsearay 18:47:29 03/02/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - Dawnrazor 20:15:45 03/02/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - tsearay 13:15:02 03/07/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - Dawnrazor 18:35:07 03/07/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - Dawnrazor 08:52:01 03/09/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - audiodan@tiscali.it 22:11:39 03/01/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - Dawnrazor 22:51:56 03/01/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - play-mate 04:10:18 02/27/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - Dawnrazor 14:54:59 02/27/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - tsearay 11:39:36 02/27/11 (0)
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - Dawnrazor 14:39:36 02/27/11 (0)
- Any other soundcards that offer I2S output? - rickmcinnis@dogwoodfabrics.com 08:04:21 02/26/11 (0)
- Migrate your OS to SSD for free using Paragon - riboge 13:35:16 02/25/11 (0)
- RE: Migrate your OS to SSD for free using Paragon - riboge 12:29:03 03/01/11 (0)
- SSD definitely worth it ! - play-mate 03:17:47 02/26/11 (0)
- RE: SSD - try a hybrid - wlowes 21:12:09 05/21/11 (0)
- I have been listening to an ssd for 1 week now... - theob 10:50:05 02/26/11 (0)
- Copied a file onto the SSD ... - rickmcinnis@dogwoodfabrics.com 08:40:22 03/02/11 (0)
- RE: Copied a file onto the SSD ... - theob 08:47:58 03/02/11 (0)
- I did read that ... - rickmcinnis@dogwoodfabrics.com 11:20:21 03/03/11 (0)
- RE: I did read that ... - theob 12:53:34 03/03/11 (0)
- SEND TO does not give me that choice - rickmcinnis@dogwoodfabrics.com 09:51:33 03/05/11 (0)
- RE: SEND TO does not give me that choice - Ryelands 10:53:03 03/05/11 (0)
- RE: SEND TO does not give me that choice - theob 11:04:07 03/05/11 (0)
- AHA! - rickmcinnis@dogwoodfabrics.com 12:54:14 03/05/11 (0)
- After listening to more recordings ... - rickmcinnis@dogwoodfabrics.com 16:27:32 03/05/11 (0)
- RE: SEND TO does not give me that choice - theob 10:43:23 03/05/11 (0)
- That sounds MUCH simpler for ME to understand - rickmcinnis@dogwoodfabrics.com 09:20:12 03/04/11 (0)
- RE: SSD definitely worth it ! - smicyta@singnet.com.sg 07:28:28 02/26/11 (0)
- Glad to hear you hear it, too. But, I think Mark lead the way - rickmcinnis@dogwoodfabrics.com 08:01:57 02/26/11 (0)
- RE: Glad to hear you hear it, too. But, I think Mark lead the way - smicyta@singnet.com.sg 08:21:04 02/26/11 (0)
- A discovery (more like a gift), a revelation, a confession, a request of Cics - theob 04:07:23 02/24/11 (0)
- After implementing minilogon, can we still create an image of our drive C:? - smicyta 21:53:56 02/21/11 (0)
- RE: After implementing minilogon, can we still create an image of our drive C:? - marco55 10:59:20 02/23/11 (0)
- RE: After implementing minilogon, can we still create an image of our drive C:? - Ryelands 00:04:08 02/22/11 (0)
- RE: After implementing minilogon, can we still create an image of our drive C:? - smicyta 00:45:44 02/22/11 (0)
- RE: cMP - the open source high-end Memory Player - Sigi 01:30:19 02/17/11 (0)
- RE: cMP - the open source high-end Memory Player - Dawnrazor 18:22:54 03/05/11 (0)
- RE: cMP - the open source high-end Memory Player - Dawnrazor 22:10:20 02/17/11 (0)
- installation problem - play-mate 10:28:38 02/17/11 (0)
- RE: cMP - the open source high-end Memory Player - Ryelands 02:41:24 02/17/11 (0)
- Installation problem - Sigi 13:02:51 02/19/11 (0)
- has anybody added the 1000th album? - marco55 02:09:45 02/16/11 (0)
- RE: has anybody added the 1000th album? - theob 05:43:16 02/16/11 (0)
- RE: has anybody added the 1000th album? - marco55 07:42:13 02/16/11 (0)
- Firewire : where to take out the signal ? PIN headers ? - play-mate 15:34:36 02/13/11 (0)
- Getting cryptographic services to stop - theob 10:14:14 02/13/11 (0)
- RE: Getting cryptographic services to stop - play-mate 13:10:39 02/18/11 (0)
- RE: Getting cryptographic services to stop - theob 15:02:20 02/19/11 (0)
- HDD & SSD and combinations there of - play-mate 06:47:18 02/13/11 (0)
- FAT v. NTFS - rickmcinnis@dogwoodfabrics.com 17:34:49 02/11/11 (0)
- Well, I did the install with FAT - rickmcinnis@dogwoodfabrics.com 10:09:25 02/13/11 (0)
- RE: FAT v. NTFS - Ryelands 02:32:36 02/13/11 (0)
- RE: FAT v. NTFS - Dawnrazor 21:38:20 02/12/11 (0)
- Unfortunately when the driver is gone it does not matter ... - rickmcinnis@dogwoodfabrics.com 09:59:56 02/13/11 (0)
- RE: Unfortunately when the driver is gone it does not matter ... - Dawnrazor 06:23:54 02/14/11 (0)
- The keyboard driver cannot be disabled ... - rickmcinnis@dogwoodfabrics.com 07:25:24 02/14/11 (0)
- RE: FAT v. NTFS - theob 08:23:52 02/12/11 (0)
- Crackles when changing track with cMP - Pandore2000 14:46:56 02/10/11 (0)
- RE: Crackles when changing track with cMP - Pandore2000 17:38:06 02/17/11 (0)
- RE: Crackles when changing track with cMP - Pandore2000 18:19:55 02/26/11 (0)
- Question about SSD´s and CD/DVD Hardware - Sigi 07:46:10 02/07/11 (0)
- RE: Question about SSD´s and CD/DVD Hardware - cics 09:13:30 02/08/11 (0)
- RE: Question about SSD´s and CD/DVD Hardware - Sigi 00:27:56 02/09/11 (0)
- RE: Question about SSD´s and CD/DVD Hardware - cics 17:48:52 02/09/11 (0)
- XP installation failure - PC still stops in the middle - play-mate 19:24:47 02/06/11 (0)
- RE: XP installation failure - PC still stops in the middle - rhin0z15 18:38:41 02/10/11 (0)
- RE: XP installation failure - PC still stops in the middle - rhin0z15 18:46:14 02/10/11 (0)
- Make sure you have at least 1GB of RAM when installing XP. nt - cics 09:06:13 02/08/11 (0)
- I did my recent installation with 512mb no problems - rickmcinnis@dogwoodfabrics.com 11:19:35 02/08/11 (0)
- Installation Status Quo - play-mate 09:43:17 02/08/11 (0)
- RE: Installation Status Quo - rhin0z15 15:34:09 02/08/11 (0)
- RE: Installation Status Quo - rhin0z15 15:23:03 02/08/11 (0)
- Installed an SSD for OS and software - rickmcinnis@dogwoodfabrics.com 08:49:26 02/06/11 (9)
- RE: Installed an SSD for OS and software - rhin0z15 18:42:11 02/10/11 (0)
- Thanks for your experiment - rickmcinnis@dogwoodfabrics.com 10:11:11 02/13/11 (0)
- One must have the SSD - rickmcinnis@dogwoodfabrics.com 11:15:34 02/08/11 (6)
- "as to border on the absurd. " :-) - hfavandepas 11:56:41 02/08/11 (5)
- Kingston 16 gb - no problems with installation - rickmcinnis@dogwoodfabrics.com 07:57:25 02/10/11 (4)
- Well let's spread the news: MOUNT AN SSD IN YOUR cMP !!! - hfavandepas 10:12:15 02/10/11 (3)
- RE: Well let's spread the news: MOUNT AN SSD IN YOUR cMP !!! - Ryelands 11:09:05 02/10/11 (0)
- pitty that the SSD did not so much in your setup - hfavandepas 14:36:14 02/10/11 (0)
- RE: pitty that the SSD did not so much in your setup - Ryelands 15:06:46 02/10/11 (0)
- RE: Well let's spread the news: MOUNT AN SSD IN YOUR cMP !!! - theob 11:08:24 02/10/11 (0)
- Your post raises the question that ... - rickmcinnis@dogwoodfabrics.com 13:54:06 02/10/11 (0)
- RE: Your post raises the question that ... - theob 16:46:19 02/10/11 (0)
- Never listened to no upsampling before (much) so ... - rickmcinnis@dogwoodfabrics.com 07:50:30 02/11/11 (0)
- RE: Never listened to no upsampling before (much) so ... - theob 08:49:25 02/11/11 (0)
- Okay here’s some good influence:..... - hfavandepas 12:35:34 02/10/11 (0)
- So far no problems ... - rickmcinnis@dogwoodfabrics.com 16:19:05 02/06/11 (0)
- RE: Installed an SSD for OS and software - Ryelands 09:11:04 02/06/11 (0)
- Big Thanks CICS and all Contributors - rhin0z15 18:45:24 02/05/11 (0)
- RE: Big Thanks CICS and all Contributors - Dawnrazor 20:50:35 02/05/11 (0)
- XP installation failure - PC just stops in the midle - play-mate 17:40:51 02/04/11 (0)
- Does the Install Disc have SP 2 on it? - ArdRi 18:00:03 02/04/11 (0)
- RE: Does the Install Disc have SP 2 on it? - rhin0z15 18:38:21 02/05/11 (0)
- XP installation failure - play-mate 01:47:47 02/05/11 (0)
- FireWire or optical MADI - play-mate 11:20:22 01/31/11 (0)
- RE: FireWire or optical MADI - Bibo01 12:36:20 01/31/11 (0)
- RE: FireWire or optical MADI - play-mate 09:26:19 02/01/11 (0)
- RE: FireWire or optical MADI - Bibo01 13:37:45 02/01/11 (0)
- RE: FireWire or optical MADI - theob 12:13:08 01/31/11 (0)
- power supply question - rhin0z15 08:44:40 01/28/11 (0)
- RE: power supply question - play-mate 11:45:06 01/28/11 (0)
- battery-powered cMP ! - play-mate 07:25:23 01/25/11 (0)
- Why stick too your Lynx Two B when going full linear/hybrid/battery ? - hfavandepas 08:43:30 01/27/11 (0)
- RE: Why stick too your Lynx Two B when going full linear/hybrid/battery ? - Dawnrazor 00:17:50 02/08/11 (0)
- Don't know what type of PSU is inside the Aurora - hfavandepas 03:32:34 02/08/11 (0)
- Thanks, I wasnt sure. nt - Dawnrazor 09:40:08 02/08/11 (0)
- RE: Why stick too your Lynx Two B when going full linear/hybrid/battery ? - Bibo01 12:00:41 01/27/11 (0)
- agree ! - play-mate 12:01:47 01/28/11 (0)
- Powering a cMP... - GStew 19:00:02 01/26/11 (0)
- Indeed: a wonderful summation (and very informative!) - hfavandepas 07:27:13 01/27/11 (0)
- Context for quantifying SQ Improvements... muddying the waters! - GStew 18:10:31 01/27/11 (0)
- Indeed, the context is crucial. Here's my climb on the SQ stepupladder - hfavandepas 10:22:46 01/30/11 (0)
- RE: Powering a cMP... - theob 04:21:00 01/27/11 (0)
- RE: Powering a cMP... - GStew 07:06:22 01/27/11 (0)
- Looks like a battery powered PICO to me - rickmcinnis@dogwoodfabrics.com 09:48:30 01/26/11 (0)
- RE: Looks like a battery powered PICO to me - play-mate 10:21:45 01/26/11 (0)
- RE: battery-powered cMP ! - Bibo01 09:29:34 01/25/11 (0)
- RE: battery-powered cMP ! - theob 08:40:23 01/25/11 (0)
- RE: battery-powered cMP ! - Ryelands 09:39:44 01/25/11 (0)
- RE: battery-powered cMP ! - theob 11:43:45 01/25/11 (0)
- Pico alternative - play-mate 12:47:08 01/25/11 (0)
- RE: Pico alternative - theob 12:55:25 01/25/11 (0)
- Viable Battery Solution for cMP ? - play-mate 14:46:43 01/25/11 (0)
- RE: Viable Battery Solution for cMP ? - theob 17:13:51 01/25/11 (0)
- Big SSD? Or, small SSD with: 1. LAN enabled? 2. external SSD/HDD? - hfavandepas 10:30:24 01/23/11 (6)
- RE: Big SSD? Or, small SSD with: 1. LAN enabled? 2. external SSD/HDD? - theob 08:26:53 02/17/11 (0)
- RE: Big SSD? Or, small SSD with: 1. LAN enabled? 2. external SSD/HDD? - hfavandepas 10:45:14 02/17/11 (0)
- RE: Big SSD? Or, small SSD with: 1. LAN enabled? 2. external SSD/HDD? - theob 11:35:19 02/17/11 (0)
- G41 intel chipset is the succesor of the intel G31 chipset - hfavandepas 11:56:18 02/17/11 (0)
- RE: G41 intel chipset is the succesor of the intel G31 chipset - theob 12:19:04 02/17/11 (0)
- my two cents....... - hfavandepas 14:30:44 02/17/11 (0)
- Bigger, faster SSD versus smaller, slower SSD - alba63 02:34:32 01/31/11 (0)
- Don't know if there is a relation between speed and SQ. - hfavandepas 03:29:46 01/31/11 (0)
- RE: Don't know if there is a relation between speed and SQ. - alba63 04:10:03 01/31/11 (0)
- RE: Don't know if there is a relation between speed and SQ. - theob 03:54:29 01/31/11 (0)
- exactly the same way as in a regular cMP setup - hfavandepas 05:42:20 01/31/11 (0)
- RE: exactly the same way as in a regular cMP setup - theob 06:23:13 01/31/11 (0)
- Yes: EXACTLY the same way - hfavandepas 06:54:38 01/31/11 (0)
- RE: Yes: EXACTLY the same way - theob 07:04:05 01/31/11 (0)
- Networked Attached Storage (HDD with a buid in networkcard) nt - hfavandepas 07:07:23 01/31/11 (0)
- SSDs - Ryelands 09:37:00 01/31/11 (0)
- thanks for adding too the mix. Looking forward too read your experience with the SSD. - hfavandepas 03:52:00 02/01/11 (0)
- RE: thanks for adding too the mix. Looking forward too read your experience with the SSD. - Ryelands 04:28:40 02/01/11 (0)
- RE: thanks for adding too the mix. Looking forward too read your experience with the SSD. - theob 05:55:45 02/01/11 (0)
- I can replicate your USB flash drive sound quality improvement experience - hfavandepas 05:45:54 02/08/11 (0)
- RE: I can replicate your USB flash drive sound quality improvement experience - theob 07:32:30 02/08/11 (0)
- It works. I got it working within 5 minutes. NAS ( - network cable - ) cMP - hfavandepas 09:13:44 02/08/11 (0)
- I geuss so :-). I will check your idea for small SSD with NAS directly onto cMP. - hfavandepas 08:00:10 02/08/11 (0)
- RE: thanks for adding too the mix. Looking forward too read your experience with the SSD. - Ryelands 06:47:55 02/01/11 (0)
- RE: exactly the same way as in a regular cMP setup - theob 06:47:39 01/31/11 (0)
- How I use my NAS - hfavandepas 02:52:47 02/01/11 (0)
- RE: How I use my NAS - theob 06:06:15 02/01/11 (0)
- RE: How I use my NAS - hfavandepas 08:18:01 02/01/11 (0)
- Did you do anything other than just plug it in? - rickmcinnis@dogwoodfabrics.com 10:18:46 01/28/11 (0)
- I just plug it in. That's all. - hfavandepas 06:41:57 01/30/11 (0)
- An interesting approach to SSD - rickmcinnis@dogwoodfabrics.com 14:31:18 01/28/11 (0)
- SSD Questions... (and a request for cics!) - GStew 18:33:14 01/27/11 (5)
- RE: SSD Questions... (and a request for cics!) - Ryelands 03:05:47 01/28/11 (3)
- RE: SSD Questions... (and a request for cics!) - theob 04:40:20 01/28/11 (2)
- HERE IT IS - IT'S LONG!!!! - Ryelands 05:54:29 01/28/11 (1)
- RE: HERE IT IS - IT'S LONG!!!! - theob 14:51:20 01/29/11 (0)
- Using Explorer as cMP's music browser - Ryelands 01:15:58 01/30/11 (0)
- RE: Using Explorer as cMP's music browser - theob 02:39:27 01/30/11 (0)
- RE: Using Explorer as cMP's music browser - Ryelands 03:04:11 01/30/11 (0)
- RE: Using Explorer as cMP's music browser - theob 03:18:02 01/30/11 (0)
- RE: Using Explorer as cMP's music browser - Ryelands 04:06:06 01/30/11 (0)
- RE: Using Explorer as cMP's music browser - theob 06:01:53 01/30/11 (0)
- RE: Using Explorer as cMP's music browser - Ryelands 06:20:36 01/30/11 (0)
- RE: Using Explorer as cMP's music browser - theob 07:01:16 01/30/11 (0)
- RE: Using Explorer as cMP's music browser - Ryelands 07:40:31 01/30/11 (0)
- RE: Using Explorer as cMP's music browser - theob 08:16:19 01/30/11 (0)
- RE: Using Explorer as cMP's music browser - theob 09:01:09 01/30/11 (0)
- RE: Using Explorer as cMP's music browser - theob 04:25:37 01/30/11 (0)
- RE: HERE IT IS - IT'S LONG!!!! - theob 07:28:41 01/28/11 (0)
- RE: HERE IT IS - IT'S LONG!!!! - Ryelands 08:10:08 01/28/11 (0)
- So it is a louder shout :-) - Bibo01 06:02:09 01/28/11 (0)
- RE: SSD Questions... (and a request for cics!) - theob 02:42:49 01/28/11 (0)
- more power questions - play-mate 12:58:26 01/20/11 (0)
- RE: more power questions - GStew 16:24:14 01/22/11 (0)
- RE: more power questions - GStew 16:49:06 01/22/11 (0)
- RE: more power questions - audiodan@tiscali.it 16:04:14 01/20/11 (0)
- ga-h55m-ud2h - rhin0z15 18:25:47 01/18/11 (0)
- could it be a RAM problem ? - play-mate 11:54:32 01/20/11 (0)
- RE:Good substitute Asus P7H55-M Pro - rhin0z15 06:48:58 01/19/11 (0)
- Linear 1.85v to DDRII for G31M-S2L - gene_ 10:58:47 01/16/11 (0)
- RE: Linear 1.85v to DDRII for G31M-S2L - jackwong96 08:25:24 01/19/11 (0)
- RE: Linear 1.85v to DDRII for G31M-S2L - gene_ 16:15:14 01/20/11 (0)
- RE: Linear 1.85v to DDRII for G31M-S2L - jackwong96 08:48:31 01/24/11 (0)
- RE: Linear 1.85v to DDRII for G31M-S2L - gene_ 16:11:10 01/26/11 (0)
- RE: Linear 1.85v to DDRII for G31M-S2L - theob 09:53:55 01/24/11 (0)
- welcome back,,,, - theob 16:53:54 01/19/11 (0)
- RE: welcome back,,,, - GStew 19:06:57 01/19/11 (0)
- RE: Linear 1.85v to DDRII for G31M-S2L - gene_ 15:32:02 01/19/11 (0)
- RE: Linear 1.85v to DDRII for G31M-S2L - GStew 20:32:41 01/16/11 (0)
- RE: Linear 1.85v to DDRII for G31M-S2L - gene_ 14:55:46 01/17/11 (0)
- RE: Linear 1.85v to DDRII for G31M-S2L - gene_ 11:42:06 01/16/11 (0)
- RE: Linear 1.85v to DDRII for G31M-S2L - Mihaylov 11:25:08 01/16/11 (0)
- RE: Linear 1.85v to DDRII for G31M-S2L - gene_ 12:10:07 01/16/11 (0)
- RE: Linear 1.85v to DDRII for G31M-S2L - gene_ 12:35:10 01/16/11 (0)
- Lynx Studio L22 upgrade - Mihaylov 15:48:02 01/11/11 (0)
- RE: Lynx Studio L22 upgrade - vangelis71 10:04:04 01/22/11 (0)
- RE: Lynx Studio L22 upgrade - Mihaylov 13:12:33 01/22/11 (0)
- RE: Lynx Studio L22 upgrade - GStew 17:29:01 01/12/11 (0)
- RE: Lynx Studio L22 upgrade - Bibo01 08:44:37 01/12/11 (0)
- RE: Lynx Studio L22 upgrade - Mihaylov 14:32:17 01/12/11 (0)
- RE: Lynx Studio L22 upgrade - play-mate 05:04:57 01/12/11 (0)
- RE: Lynx Studio L22 upgrade - smicyta 06:57:28 01/12/11 (0)
- Thanks! (nt) - Bibo01 02:51:45 01/12/11 (0)
- RE: cMP - the open source high-end Memory Player - play-mate 05:52:50 01/10/11 (0)
- RE: cMP - the open source high-end Memory Player - audiodan@tiscali.it 07:56:40 01/10/11 (0)
- Just checking: did you disable the Windows logon welcome screen? - hfavandepas 07:19:17 01/10/11 (0)
- RE: cMP - the open source high-end Memory Player - theob 07:14:52 01/10/11 (0)
- Multiple Power Supply Grounding and Pico/Linear Questions - EmailTim 22:39:19 01/04/11 (0)
- why so different? - hfavandepas 02:12:20 01/05/11 (0)
- RE: why so different? - EmailTim 08:25:18 01/05/11 (0)
- Some thoughts on grounding and grounding as I do in my setup - hfavandepas 16:40:02 01/05/11 (0)
- What are good linear power supply specs ?? - EmailTim 18:13:20 01/06/11 (0)
- Those specs are spectacular, however... - hfavandepas 06:00:35 01/07/11 (0)
- RE: Some thoughts on grounding and grounding as I do in my setup - play-mate 03:49:54 01/06/11 (0)
- In the cMP concept the USB is powered separately - hfavandepas 06:10:25 01/06/11 (0)
- RE: Some thoughts on grounding and grounding as I do in my setup - EmailTim 17:39:16 01/05/11 (0)
- Win 7 - play-mate 16:05:57 01/05/11 (0)
- RE: cMP - the open source high-end Memory Player - ook 09:59:35 01/03/11 (0)
- New Hardware Questions - Dawnrazor 18:35:16 12/31/10 (0)
- Thanks for the help. Figured it out! nt. - Dawnrazor 01:34:57 01/01/11 (0)
- RE: New Hardware Questions - rhin0z15 20:08:02 12/31/10 (0)
- RE: New Hardware Questions - rhin0z15 20:03:14 12/31/10 (0)
- RE: New Hardware Questions - rhin0z15 19:48:03 12/31/10 (0)
- P4 power supply using the BELLESON regulator and mouse problem - rickmcinnis@dogwoodfabrics.com 08:54:16 12/30/10 (0)
- RE: P4 power supply using the BELLESON regulator and mouse problem - GStew 12:09:05 12/31/10 (0)
- It did come back on! - rickmcinnis@dogwoodfabrics.com 19:26:15 12/31/10 (0)
- You made me go check! - GStew 21:53:00 12/31/10 (0)
- Thanks for the dialogue - rickmcinnis@dogwoodfabrics.com 11:11:35 01/01/11 (0)
- RE: Thanks for the dialogue - GStew 20:44:47 01/01/11 (0)
- The ground wire connection to the P24 ground did it - rickmcinnis@dogwoodfabrics.com 14:11:27 01/01/11 (0)
- RE: The ground wire connection to the P24 ground did it - GStew 18:41:11 01/01/11 (0)
- RE: The ground wire connection to the P24 ground did it - Jolida 11:42:44 01/15/11 (0)
- RE: The ground wire connection to the P24 ground did it - Mihaylov 18:47:10 01/15/11 (0)
- RE: The ground wire connection to the P24 ground did it - Jolida 04:51:59 01/16/11 (0)
- RE: The ground wire connection to the P24 ground did it - Ryelands 07:31:35 01/16/11 (0)
- RE: The ground wire connection to the P24 ground did it - Jolida 07:45:53 01/16/11 (0)
- RE: The ground wire connection to the P24 ground did it - Jolida 10:52:56 01/16/11 (0)
- Again, congratulations... - GStew 16:51:57 12/31/10 (0)
- My choke supply is standard stuff - rickmcinnis@dogwoodfabrics.com 19:59:20 12/31/10 (0)
- RE: My choke supply is standard stuff - GStew 19:17:46 01/01/11 (0)
- Without the error amp the regulator cannot compensate for ... - rickmcinnis@dogwoodfabrics.com 08:23:00 01/02/11 (0)
- RE: P4 power supply using the BELLESON regulator and mouse problem - theob 09:18:34 12/30/10 (0)
- Thanks for the encouragement - rickmcinnis@dogwoodfabrics.com 13:33:36 12/30/10 (0)
- LatencyMon in place of DPC Latency Checker... - Bibo01 15:05:52 12/28/10 (0)
- Lynx AES16 Or AES16e? - smicyta 02:04:36 12/19/10 (0)
- RE: Lynx AES16 Or AES16e? - play-mate 08:11:44 12/20/10 (0)
- New CPUs & mobos using latest 32nm Sandybridge architecture (2011q1): Intel exiting from PCI - PCIe preferred - cics 21:06:52 12/20/10 (0)
- RE: New CPUs & mobos using latest 32nm Sandybridge architecture (2011q1): Intel exiting from PCI - PCIe preferred - Mihaylov 10:54:16 05/01/11 (0)
- RE: New CPUs & mobos using latest 32nm Sandybridge architecture (2011q1): Intel exiting from PCI - PCIe preferred - Mihaylov 13:54:26 12/21/10 (0)
- More Cores and/or More Cache any better ??? - EmailTim 19:19:43 01/10/11 (0)
- Gigabyte H55M-S2V - has anyone looked at this? - rickmcinnis@dogwoodfabrics.com 12:19:29 12/13/10 (0)
- Won't allow low CPU voltage - rickmcinnis@dogwoodfabrics.com 20:01:33 12/13/10 (0)
- THX to all but new problem rises - audiodan@tiscali.it 23:17:31 12/12/10 (0)
- Remove the CMOS battery for a few hours - rickmcinnis@dogwoodfabrics.com 08:09:18 12/13/10 (0)
- RE: Remove the CMOS battery for a few hours - audiodan@tiscali.it 23:50:45 12/13/10 (0)
- Linear PSU again: help needed - audiodan@tiscali.it 16:43:59 12/09/10 (0)
- RE: Linear PSU again: help needed - gene_ 13:19:19 12/12/10 (0)
- RE: Linear PSU again: help needed - Mihaylov 14:08:54 12/12/10 (0)
- RE: Linear PSU again: help needed - gene_ 14:52:19 12/12/10 (0)
- RE: Linear PSU again: help needed - gene_ 15:20:32 12/14/10 (0)
- RE: Linear PSU again: help needed - gene_ 13:00:27 12/19/10 (0)
- RE: Linear PSU again: help needed - Mihaylov 13:53:08 12/19/10 (0)
- RE: Linear PSU again: help needed - gene_ 15:27:01 01/07/11 (0)
- RE: Linear PSU again: help needed - Mihaylov 16:47:37 01/07/11 (0)
- RE: Linear PSU again: help needed - gene_ 01:47:40 01/08/11 (0)
- RE: Linear PSU again: help needed - Mihaylov 16:19:06 12/11/10 (0)
- RE: Linear PSU again: help needed - cics 00:09:52 12/12/10 (0)
- RE: Linear PSU again: help needed - GStew 10:08:37 12/12/10 (0)
- RE: Linear PSU again: help needed - Bibo01 10:54:07 12/12/10 (0)
- Great, THANKS! (NT) - GStew 11:51:44 12/12/10 (0)
- RE: Linear PSU again: help needed - Mihaylov 08:10:22 12/12/10 (0)
- Site updated with latest version - please check. nt. - cics 22:48:45 12/13/10 (0)
- OK! - Mihaylov 10:50:52 12/14/10 (0)
- RE: Linear PSU again: help needed - Bibo01 04:06:50 12/12/10 (0)
- RE: Linear PSU again: help needed - Mihaylov 08:31:31 12/12/10 (0)
- RE: Linear PSU again: help needed - Bibo01 12:04:55 12/12/10 (0)
- RE: Linear PSU again: help needed - Mihaylov 13:59:06 12/12/10 (0)
- RE: Linear PSU again: help needed - Bibo01 10:00:46 12/14/10 (0)
- RE: Linear PSU again: help needed - Mihaylov 11:00:11 12/14/10 (0)
- Does Pin 16 on P24 get connected? - Bibo01 00:28:20 12/15/10 (0)
- RE: Does Pin 16 on P24 get connected? - Mihaylov 11:17:46 12/15/10 (0)
- RE: Does Pin 16 on P24 get connected? - Bibo01 13:46:52 12/15/10 (0)
- RE: Does Pin 16 on P24 get connected? - Mihaylov 15:30:38 12/15/10 (0)
- RE: Linear PSU again: help needed - Bibo01 12:35:54 12/14/10 (0)
- RE: Linear PSU again: help needed - Bibo01 00:07:04 12/13/10 (0)
- When finished, could you post some pics? - hfavandepas 05:36:27 12/12/10 (0)
- Certainly! - Bibo01 07:29:50 12/12/10 (0)
- RE: Certainly! - cics 07:41:11 12/12/10 (0)
- RE: Certainly! - Bibo01 12:06:18 12/12/10 (0)
- RE: Certainly! - play-mate 10:36:19 12/12/10 (0)
- What specs should such a PSU have? - hfavandepas 16:40:40 12/12/10 (0)
- RE: Linear PSU again: help needed - audiodan@tiscali.it 06:17:16 12/11/10 (0)
- Some additional thoughts on a separate set of PSU's for your cMP... (Of course, long!) - GStew 11:47:58 12/12/10 (0)
- RE: Some additional thoughts on a separate set of PSU's for your cMP... (Of course, long!) - Bibo01 05:25:37 12/13/10 (0)
- RE: Some additional thoughts on a separate set of PSU's for your cMP... (Of course, long!) - GStew 18:36:07 12/13/10 (0)
- RE: Some additional thoughts on a separate set of PSU's for your cMP... (Of course, long!) - audiodan@tiscali.it 22:44:31 12/12/10 (0)
- RE: Some additional thoughts on a separate set of PSU's for your cMP... (Of course, long!) - GStew 07:09:03 12/13/10 (0)
- Italian site/forum for cMP² - Bibo01 15:10:44 12/03/10 (0)
- RE: Italian site/forum for cMP² - Mihaylov 07:14:58 12/04/10 (0)
- RE: Italian site/forum for cMP² - Bibo01 09:13:19 12/04/10 (0)
- Source Code - sidesk_nrj@yahoo.com 04:03:37 11/29/10 (0)
- Juli@ card will be release in PCIe - n_vincent 22:27:36 11/28/10 (0)
- Bryston BDP-1 High Resolution Digital Music Player - smicyta 02:39:57 11/27/10 (0)
- EVS Ground Enhancers - interesting tweak - rickmcinnis@dogwoodfabrics.com 14:42:28 11/23/10 (0)
- RE: EVS Ground Enhancers - interesting tweak - theob 16:36:56 11/23/10 (0)
- EVS Ground Enhancer tweak a month or so down the line? - GStew 17:08:19 12/31/10 (0)
- RE: EVS Ground Enhancer tweak a month or so down the line? - theob 05:45:27 01/01/11 (0)
- Thanks for relating your experiences with this... - GStew 22:38:45 01/01/11 (0)
- Grounding - play-mate 01:11:14 11/24/10 (0)
- CICS Computer with MSB Dac - n_vincent 23:20:11 11/18/10 (0)
- RE: CICS Computer with MSB Dac - cics 07:22:36 11/21/10 (0)
- RE: CICS Computer with MSB Dac - tsearay 18:13:06 11/28/10 (0)
- RE: CICS Computer with MSB Dac - monaco 04:16:07 11/22/10 (0)
- RE: CICS Computer with MSB Dac - theob 06:16:17 11/22/10 (0)
- RE: CICS Computer with MSB Dac and more : Devialet amplifier - n_vincent 23:45:12 11/21/10 (0)
- thank you for putting into perspective - hfavandepas 09:09:27 11/21/10 (0)
- RE: thank you for putting into perspective - Dawnrazor 20:17:20 12/07/10 (0)
- RE: thank you for putting into perspective - linear PS - cics 05:06:21 12/10/10 (0)
- Finally got new speakers - cics 12:21:02 12/07/10 (0)
- Very, very beautifull design and very well crafted. - hfavandepas 13:44:05 12/09/10 (0)
- RE: Very, very beautifull design and very well crafted. - cics 05:29:19 12/10/10 (0)
- RE: Finally got new speakers - smicyta 07:59:57 12/09/10 (0)
- RE: Finally got new speakers - there are 30 Fenice pairs available - cics 05:03:52 12/10/10 (0)
- RE: Finally got new speakers - theob 13:48:12 12/07/10 (0)
- RE: cMP - the open source high-end Memory Player - goestrin 00:44:27 11/17/10 (0)
- RE: cMP - the open source high-end Memory Player - Bibo01 02:05:26 11/17/10 (0)
- Site is being restored - hosting server is being rebuilt - goestrin 10:35:29 11/18/10 (0)
- Site is being restored - hosting server is being rebuilt - cics 07:13:36 11/17/10 (0)
- Gigabyte GA-H55M-UD2H - questions for owners - aljordan 13:04:42 11/11/10 (0)
- RE: Gigabyte GA-H55M-UD2H - questions for owners - tsearay 19:20:41 11/14/10 (0)
- I had problems but they were self-induced - rickmcinnis@dogwoodfabrics.com 09:28:18 11/12/10 (0)
- RE: Gigabyte GA-H55M-UD2H - questions for owners - Bibo01 14:11:49 11/11/10 (0)
- slimming XP with nLite - Marcin_gps 10:02:07 11/11/10 (0)
- RE: slimming XP with nLite - Ryelands 10:43:42 11/11/10 (0)
- RE: slimming XP with nLite - Marcin_gps 11:31:50 11/11/10 (0)
- RE: Where is the new Core i3 / i5 hardware listed? - aljordan 06:56:04 11/11/10 (0)
- RE: Where is the new Core i3 / i5 hardware listed? - Bibo01 07:23:21 11/11/10 (0)
- Site updates: Oct 2010, Registry Optimisation added: 7.3 Reduce USB Polling - Mihaylov 17:56:19 10/29/10 (0)
- RE: Site updates: Oct 2010, Registry Optimisation added: 7.3 Reduce USB Polling - Mihaylov 15:48:17 11/01/10 (0)
- RE: Site updates: Oct 2010, Registry Optimisation added: 7.3 Reduce USB Polling - Ryelands 10:26:27 11/01/10 (0)
- RE: Site updates: Oct 2010, Registry Optimisation added: 7.3 Reduce USB Polling - theob 09:50:17 11/01/10 (0)
- RE: Site updates: Oct 2010, Registry Optimisation added: 7.3 Reduce USB Polling - Marcin_gps 06:25:21 12/01/10 (0)
- RE: Site updates: Oct 2010, Registry Optimisation added: 7.3 Reduce USB Polling - theob 07:49:44 12/01/10 (0)
- RE: Site updates: Oct 2010, Registry Optimisation added: 7.3 Reduce USB Polling - Marcin_gps 07:51:25 12/01/10 (0)
- PSU linear power -again! - play-mate 03:11:23 10/29/10 (0)
- RE: PSU linear power -again! - GStew 21:06:00 10/29/10 (0)
- RE: PSU linear power -again! - Mihaylov 20:51:52 10/30/10 (0)
- RE: PSU linear power -again! - GStew 17:58:34 10/31/10 (0)
- RE: PSU linear power -again! - Mihaylov 18:19:15 10/31/10 (0)
- RE: PSU linear power -again! - GStew 18:59:08 10/31/10 (0)
- RE: PSU linear power -again! - Mihaylov 19:33:19 10/31/10 (0)
- RE: PSU linear power -again! - Bibo01 04:31:25 10/29/10 (0)
- RE: PSU linear power -again! - Mihaylov 17:44:29 10/29/10 (0)
- RE: PSU linear power -again! - Bibo01 23:19:28 10/29/10 (0)
- RE: PSU linear power -again! - Mihaylov 11:00:33 10/30/10 (0)
- PCI Latency Tool proper installation in cMP - Bibo01 10:49:49 10/24/10 (0)
- I managed but with LynxTWO-B... - Bibo01 04:55:27 10/25/10 (0)
- RE: I managed but with LynxTWO-B... - Dawnrazor 07:58:32 10/25/10 (0)
- IDE to AHCI with minlogon - Bibo01 10:19:42 10/24/10 (0)
- Switch from IDE to AHCI with new platform - Recommended! - Bibo01 08:48:41 10/25/10 (0)
- RE: Switch from IDE to AHCI with new platform - Recommended! - Mihaylov 18:17:02 10/25/10 (0)
- RE: Switch from IDE to AHCI with new platform - Recommended! - Bibo01 03:23:42 10/26/10 (0)
- RE: Switch from IDE to AHCI with new platform - Recommended! - Mihaylov 16:38:46 10/26/10 (0)
- RE: Switch from IDE to AHCI with new platform - Recommended! - Bibo01 01:12:46 10/27/10 (0)
- RE: Switch from IDE to AHCI with new platform - Recommended! - Mihaylov 12:54:12 10/27/10 (0)
- JackWong96, are you still around? - GStew 19:40:00 10/18/10 (0)
- status quo on i-core/SSD/win7 - play-mate 11:38:36 10/08/10 (0)
- GA-H55-USB3 or GA-H55M-USB3 - Marcin_gps 11:27:37 10/08/10 (0)
- PCI latency setting for non-audio devices - Marcin_gps 09:34:44 10/05/10 (0)
- Zalman HD160XT and Thermaltake DH102 cases powering - Bibo01 00:31:42 09/29/10 (0)
- RE: Zalman HD160XT and Thermaltake DH102 cases powering - GStew 21:12:56 10/02/10 (0)
- RE: Zalman HD160XT and Thermaltake DH102 cases powering - GStew 07:28:10 09/29/10 (0)
- RE: Zalman HD160XT and Thermaltake DH102 cases powering - Bibo01 08:10:21 09/29/10 (0)
- RE: Zalman HD160XT and Thermaltake DH102 cases powering - GStew 09:12:58 09/29/10 (0)
- RE: Zalman HD160XT and Thermaltake DH102 cases powering - Bibo01 10:19:45 09/29/10 (0)
- RE: Zalman HD160XT and Thermaltake DH102 cases powering - Mihaylov 05:24:37 09/29/10 (0)
- RE: Zalman HD160XT and Thermaltake DH102 cases powering - Bibo01 07:15:19 09/29/10 (0)
- RE: Zalman HD160XT and Thermaltake DH102 cases powering - Mihaylov 15:24:04 09/29/10 (0)
- RE: Zalman HD160XT and Thermaltake DH102 cases powering - Bibo01 22:18:26 09/29/10 (0)
- RE: Zalman HD160XT and Thermaltake DH102 cases powering - Mihaylov 16:36:05 09/30/10 (0)
- RE: Zalman HD160XT and Thermaltake DH102 cases powering - Bibo01 22:52:17 09/30/10 (0)
- Might be the way to go for ATX regulators - rickmcinnis@dogwoodfabrics.com 12:42:09 09/16/10 (0)
- Totally agree... - GStew 20:05:45 09/16/10 (0)
- Nobody ever disagreed - rickmcinnis@dogwoodfabrics.com 07:39:51 09/17/10 (0)
- RE: Nobody ever disagreed - GStew 21:21:13 09/19/10 (0)
- cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - Mihaylov 17:52:35 09/11/10 (33)
- Bios version - Bibo01 08:01:05 10/22/10 (0)
- Much Thanks Mihaylov! - Julien43 08:44:16 10/17/10 (1)
- RE: Much Thanks Mihaylov! - Mihaylov 14:37:06 10/17/10 (0)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - etiennelemay@gmail.com 19:37:43 10/12/10 (0)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - Mihaylov 15:06:14 10/13/10 (0)
- mihaylov !! - play-mate 05:25:03 10/12/10 (0)
- RE: mihaylov !! - Mihaylov 14:35:02 10/12/10 (0)
- The power consumption of the my new platform. - Mihaylov 16:45:10 09/18/10 (10)
- RE: The power consumption of the my new platform. - Bibo01 23:42:17 09/24/10 (9)
- RE: The power consumption of the my new platform. - GStew 16:21:18 09/25/10 (8)
- RE: The power consumption of the my new platform. - Bibo01 13:19:58 09/26/10 (7)
- RE: The power consumption of the my new platform. - Mihaylov 15:36:16 09/26/10 (6)
- Why should one care how much power the HDD requires? - rickmcinnis@dogwoodfabrics.com 13:22:47 09/29/10 (5)
- RE: Why should one care how much power the HDD requires? - Mihaylov 15:05:52 09/29/10 (4)
- Those are legitimate reasons, but ... - rickmcinnis@dogwoodfabrics.com 11:30:17 09/30/10 (3)
- RE: Those are legitimate reasons, but ... - theob 17:51:12 10/03/10 (1)
- As I attempted to say .... - rickmcinnis@dogwoodfabrics.com 13:07:29 10/12/10 (0)
- RE: Those are legitimate reasons, but ... - GStew 16:40:12 10/02/10 (0)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - Bibo01 05:57:34 09/16/10 (12)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - Mihaylov 13:58:08 09/16/10 (11)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - GStew 20:47:53 09/17/10 (10)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - Mihaylov 09:17:11 09/18/10 (9)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - Mihaylov 23:40:19 10/23/10 (2)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - Bibo01 03:29:19 10/26/10 (1)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - Mihaylov 13:06:16 10/27/10 (0)
- the circuit for monitor off/on - Mihaylov 19:52:37 10/31/10 (0)
- RE: the circuit for monitor off/on - Bibo01 00:38:17 11/01/10 (0)
- RE: the circuit for monitor off/on - Mihaylov 15:41:41 11/01/10 (0)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - GStew 15:33:42 09/18/10 (0)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - Mihaylov 16:08:56 09/18/10 (0)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - Bibo01 03:01:51 09/22/10 (0)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - Mihaylov 16:21:50 09/22/10 (0)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - Bibo01 22:52:28 09/22/10 (0)
- RE: cics's "Please switch to new 32nm technology (Intel Core i3-530, ...)" - Mihaylov 15:00:48 09/23/10 (0)
- the sound on the new platform much better than on the previous. - Mihaylov 13:48:31 09/13/10 (0)
- Thanks for the good advice within that Important Post) - rickmcinnis@dogwoodfabrics.com 10:15:28 09/13/10 (0)
- USB monitor experiment a failure - rickmcinnis@dogwoodfabrics.com 07:35:34 09/06/10 (0)
- Any thoughts on this industrial linear PSU for my cMP setup? - hfavandepas 03:33:13 09/03/10 (0)
- First, thanks for the vote of confidence... - GStew 14:00:47 09/04/10 (0)
- a linear PSU from Thurbly Thandar Instruments (TTi) PL330QMT is on it;s way. - hfavandepas 05:13:59 09/13/10 (0)
- RE: Any thoughts on this industrial linear PSU for my cMP setup? - smicyta 23:47:21 09/03/10 (0)
- Certainly would make the job simpler - rickmcinnis@dogwoodfabrics.com 12:14:56 09/03/10 (0)
- RE: Certainly would make the job simpler - hfavandepas 14:49:22 09/03/10 (0)
- Who knows what the equivalent series resistance is - rickmcinnis@dogwoodfabrics.com 20:01:03 09/03/10 (0)
- I consider too buy one. But also consider too concentrate more on sinking/filtering - hfavandepas 04:25:46 09/07/10 (0)
- Good switchers are hard to design, not impossible - rickmcinnis@dogwoodfabrics.com 07:49:37 09/07/10 (0)
- RE: Any thoughts on this industrial linear PSU for my cMP setup? - RayBan 09:03:46 09/03/10 (0)
- Sharing upsampling duty between computer and DAC - rickmcinnis@dogwoodfabrics.com 11:40:17 09/01/10 (0)
- RE: Sharing upsampling duty between computer and DAC - hallcon83 22:11:51 09/02/10 (0)
- RE: Sharing upsampling duty between computer and DAC - Ryelands 03:21:05 09/03/10 (0)
- RE: Sharing upsampling duty between computer and DAC - hallcon83 09:57:03 09/03/10 (0)
- What MoBo-Soundcard-Combo...? - allnskloar 06:25:44 08/26/10 (0)
- RE: What MoBo-Soundcard-Combo...? - allnskloar 10:10:09 08/26/10 (0)
- Why not use the suggested pieces? - rickmcinnis@dogwoodfabrics.com 08:36:32 08/26/10 (0)
- RE: Why not use the suggested pieces? - smicyta 09:07:22 08/26/10 (0)
- RE: Why not use the suggested pieces? - allnskloar 10:12:31 08/26/10 (0)
- What is better for cMP2: GA-H55M-UD2H rev.1.0 or rev.1.3 ? - Mihaylov 13:58:10 08/25/10 (0)
- UPDATE on power supply for TUBE BUFFERED SPDIF. - lga775 19:53:24 08/24/10 (0)
- Pre-fetcher registry changes - rickmcinnis@dogwoodfabrics.com 13:46:15 08/24/10 (0)
- This post contains more changes to disable Pre-fetcher - rickmcinnis@dogwoodfabrics.com 08:34:46 08/26/10 (0)
- USB monitor - better or worse? - rickmcinnis@dogwoodfabrics.com 11:40:15 08/23/10 (0)
- Got the thing and it does not want to be installed within a cMP set-up - rickmcinnis@dogwoodfabrics.com 20:02:54 09/03/10 (0)
- RE: Got the thing and it does not want to be installed within a cMP set-up - Ryelands 00:11:43 09/04/10 (0)
- I did that and re-started the other services that cics recommended - rickmcinnis@dogwoodfabrics.com 10:18:17 09/04/10 (0)
- Furhter thoughts - USB advantage - easy to disconnect - rickmcinnis@dogwoodfabrics.com 08:35:06 08/30/10 (0)
- RE: Further thoughts - USB advantage - easy to disconnect - Ryelands 10:29:15 08/30/10 (0)
- That seems like a good idea - rickmcinnis@dogwoodfabrics.com 12:59:11 08/30/10 (0)
- Tried it at work - no functional loss that I can see - rickmcinnis@dogwoodfabrics.com 13:08:27 08/30/10 (0)
- Thanks for your input - rickmcinnis@dogwoodfabrics.com 12:56:20 08/30/10 (0)
- That would be ideal if you wanted to use a case w/o - ArdRi 13:09:38 08/23/10 (0)
- I need the advice of one of our MB/CPU experts beofre I jump - rickmcinnis@dogwoodfabrics.com 14:02:52 08/23/10 (0)
- RE: I need the advice of one of our MB/CPU experts beofre I jump - GStew 17:14:03 08/29/10 (0)
- Though I could not express my fears ... - rickmcinnis@dogwoodfabrics.com 13:25:47 08/30/10 (0)
- Internal Graphics Clock? (said the wrong thing before) - rickmcinnis@dogwoodfabrics.com 06:35:33 08/21/10 (0)
- cMP vs, or with cPlay 2.0b37 - bruce.weiland@verizon.net 22:44:22 08/16/10 (0)
- RE: cMP vs, or with cPlay 2.0b37 - Audio Bling 23:08:38 08/16/10 (0)
- RE: cMP vs, or with cPlay 2.0b37 - bruce.weiland@verizon.net 11:06:19 08/17/10 (0)
- RE: cMP vs, or with cPlay 2.0b37 - Audio Bling 19:17:23 08/17/10 (0)
- RE: cMP vs, or with cPlay 2.0b37 - bruce.weiland@verizon.net 17:04:12 08/18/10 (0)
- RE: cMP vs, or with cPlay 2.0b37 - seger 00:55:37 08/19/10 (0)
- RE: cMP vs, or with cPlay 2.0b37 - bruce.weiland@verizon.net 06:30:48 08/19/10 (0)
- RE: cMP vs, or with cPlay 2.0b37 - Audio Bling 23:01:37 08/18/10 (0)
- RE: cMP vs, or with cPlay 2.0b37 - bruce.weiland@verizon.net 06:12:29 08/19/10 (0)
- RE: cMP vs, or with cPlay 2.0b37 - bruce.weiland@verizon.net 11:34:03 08/17/10 (0)
- Stuck in "cMP mode"... - gjwAudio 16:44:36 08/16/10 (0)
- Does re-installing cMP and cPLAY help? - rickmcinnis@dogwoodfabrics.com 07:48:23 08/17/10 (0)
- I use cMP's Startup feature to launch Task Manager... - gjwAudio 19:35:06 08/16/10 (0)
- Differences between SP1 & SP2? - GStew 06:53:51 08/17/10 (0)
- Have you ticked the Process Explorer option next to - ArdRi 19:02:46 08/16/10 (0)
- LT3080-based regulators & Linear P4 on Dirty AC circuit experiments... - GStew 07:30:15 08/16/10 (0)
- If at first you don't succeed... - GStew 19:01:26 08/22/10 (0)
- Davenport is no longer using the LT3080 - rickmcinnis@dogwoodfabrics.com 14:28:12 08/16/10 (0)
- RE: Davenport is no longer using the LT3080 - GStew 20:30:46 08/18/10 (0)
- RE: Davenport is no longer using the LT3080 - GStew 20:20:15 08/18/10 (0)
- Hey Rick! - GStew 20:16:39 08/18/10 (0)
- I do not think he thinks it bad - rickmcinnis@dogwoodfabrics.com 09:07:50 08/19/10 (0)
- RE: I do not think he thinks it bad - belleson 19:04:47 08/25/10 (0)
- I am sure the BELLESON is superior to any three pin - rickmcinnis@dogwoodfabrics.com 08:32:54 08/26/10 (0)
- RE: LT3080-based regulators & Linear P4 on Dirty AC circuit experiments... - ForgotPassword 07:39:56 08/16/10 (0)
- RE: LT3080-based regulators & Linear P4 on Dirty AC circuit experiments... - GStew 08:25:43 08/16/10 (0)
- GA-H55M-UD2H bios w/ no 'spread spectrum' settings? - Apokalypse 05:35:23 08/15/10 (0)
- Did you "control/F1"? - rickmcinnis@dogwoodfabrics.com 11:48:01 08/15/10 (0)
- RE: Did you "control/F1"? - Apokalypse 04:33:47 08/16/10 (0)
- what do you think about this MB? - marcin_gps@go2.pl 14:44:52 08/10/10 (0)
- RE: what do you think about this MB? - tsearay 17:42:56 08/12/10 (0)
- Gigabyte gives a 3 year warranty for the "Ultra Durable™" UD2H - Julien43 14:15:40 08/13/10 (0)
- One should ask for an RMA as soon as they receive the board - rickmcinnis@dogwoodfabrics.com 07:40:48 08/13/10 (0)
- RE: One should ask for an RMA as soon as they receive the board - tsearay 10:20:50 09/12/10 (0)
- Gigabyte answeres all the negative posts on newegg - ArdRi 12:05:07 08/14/10 (0)
- PROs: LCaudio XO3 or APOGEE BIG BEN for Juli@? - lga775 10:04:38 08/08/10 (0)
- RE: PROs: LCaudio XO3 or APOGEE BIG BEN for Juli@? - tsearay 19:13:17 08/09/10 (0)
- RE: PROs: LCaudio XO3 or APOGEE BIG BEN for Juli@? - Dawnrazor 21:47:18 08/09/10 (0)
- Can one combine the two .bat files (RIP button) into one - rickmcinnis@dogwoodfabrics.com 14:02:51 08/06/10 (0)
- Seems there is no need for this - rickmcinnis@dogwoodfabrics.com 09:37:16 08/08/10 (0)
- PCI Latency Tool shows 32, is this too small? - rickmcinnis@dogwoodfabrics.com 13:44:07 08/06/10 (0)
- Set it at 128, along with the CRYPTOGRAPHIC services suspend - rickmcinnis@dogwoodfabrics.com 22:35:18 08/06/10 (0)
- saw an old post recommending 128 on cPLAY Forum - rickmcinnis@dogwoodfabrics.com 13:48:34 08/06/10 (0)
- While I'm waiting for my replacement H55M-UD2H... - Julien43 04:33:14 08/04/10 (0)
- Not a good idea to load WINDOWS yet - rickmcinnis@dogwoodfabrics.com 13:29:16 08/04/10 (0)
- RE: Not a good idea to load WINDOWS yet - Julien43 03:35:49 08/05/10 (0)
- Thanks Guys!! That is just the sort of input I was looking for /nt\ - Julien43 16:15:24 08/05/10 (0)
- RE: Not a good idea to load WINDOWS yet - Ryelands 09:13:29 08/05/10 (0)
- RE: Not a good idea to load WINDOWS yet - Julien43 18:56:44 08/05/10 (0)
- RE: Not a good idea to load WINDOWS yet - Ryelands 21:35:44 08/05/10 (0)
- That is what I twas alking about (just not coherently) - rickmcinnis@dogwoodfabrics.com 07:50:48 08/05/10 (0)
- RE: That is what I twas alking about (just not coherently) - Julien43 18:22:16 08/05/10 (0)
- The chance of it being because of you - rickmcinnis@dogwoodfabrics.com 07:58:17 08/06/10 (0)
- RE: The chance of it being because of you - Julien43 19:25:40 08/07/10 (0)
- the persistance of incorrect memory - rickmcinnis@dogwoodfabrics.com 14:41:51 08/08/10 (0)
- RE: cMP - the open source high-end Memory Player - tsearay 12:11:45 07/31/10 (0)
- Power supply compromise - output chokes for the ATX - rickmcinnis@dogwoodfabrics.com 15:22:47 07/30/10 (0)
- No report on the experiment ... 8{(# - GStew 09:16:32 08/01/10 (0)
- Did not get around to it ... - rickmcinnis@dogwoodfabrics.com 11:16:18 08/01/10 (0)
- RE: Did not get around to it ... - GStew 15:53:39 08/01/10 (0)
- No question - you do not just stick a choke in - rickmcinnis@dogwoodfabrics.com 20:05:27 08/01/10 (0)
- BURSON high current regulator is not a Shunt type - rickmcinnis@dogwoodfabrics.com 10:21:26 08/03/10 (0)
- Nice discussion - theob 09:05:44 08/02/10 (0)
- Certainly not an expert, Theo - rickmcinnis@dogwoodfabrics.com 09:29:05 08/02/10 (0)
- RE: Certainly not an expert, Theo - theob 12:20:44 08/02/10 (0)
- an auspicious entry into the world of audio - rickmcinnis@dogwoodfabrics.com 14:55:54 08/02/10 (0)
- RE: an auspicious entry into the world of audio - theob 16:16:09 08/02/10 (0)
- I kept as much as I could ... - rickmcinnis@dogwoodfabrics.com 19:19:11 08/02/10 (0)
- SMPS for Audio vs Linears... my 2 cents (long, of course!) - GStew 21:03:32 07/30/10 (0)
- Greg, thanks - and comments - rickmcinnis@dogwoodfabrics.com 10:04:02 07/31/10 (0)
- RE: Greg, thanks - and comments - GStew 14:11:35 07/31/10 (0)
- RE: Power supply compromise - output chokes for the ATX - theob 16:18:00 07/30/10 (0)
- Theo, that is bad news - rickmcinnis@dogwoodfabrics.com 10:11:17 07/31/10 (0)
- RE: Theo, that is bad news - theob 10:53:29 07/31/10 (0)
- H55m-udh2h ,post, troubleshoot, problem, error, cmos checksum - Julien43 10:20:15 07/30/10 (0)
- Update 1: H55m-udh2h ,post, troubleshoot, problem, error, cmos checksum - Julien43 05:40:08 08/01/10 (0)
- Long story... short - Julien43 04:24:01 08/04/10 (0)
- With JULI@ as digital only why not cut the 3.3 V traces also? - rickmcinnis@dogwoodfabrics.com 20:05:38 07/28/10 (6)
- GREG, I could use your help - rickmcinnis@dogwoodfabrics.com 19:09:47 07/29/10 (0)
- RE: GREG, I could use your help - GStew 07:50:10 07/30/10 (0)
- RE: GREG, I could use your help - GStew 19:21:54 07/29/10 (0)
- wish I was that organized! - rickmcinnis@dogwoodfabrics.com 08:23:50 07/30/10 (0)
- RE: With JULI@ as digital only why not cut the 3.3 V traces also? - GStew 20:49:02 07/28/10 (0)
- I had not looked! - rickmcinnis@dogwoodfabrics.com 09:20:53 07/29/10 (0)
- RE: I had not looked! - GStew 11:26:33 07/29/10 (0)
- Thanks for the technique advice - rickmcinnis@dogwoodfabrics.com 14:27:38 07/29/10 (0)
- RE: Thanks for the technique advice - GStew 20:24:07 07/29/10 (0)
- Very clean! - rickmcinnis@dogwoodfabrics.com 08:32:05 07/30/10 (0)
- CMOS Checksum error when trying to access BIOS - Julien43 19:36:35 07/27/10 (0)
- Well Guys, I triedthe battery and powercord - Julien43 17:06:05 07/29/10 (0)
- You just might - rickmcinnis@dogwoodfabrics.com 19:14:33 07/29/10 (0)
- You are turning off the power supply - rickmcinnis@dogwoodfabrics.com 19:15:43 07/29/10 (0)
- Yes, I detached the power cord after turning the PSU off - Julien43 11:55:26 08/01/10 (0)
- Make sure you go ahead and get an RMA from NEWEGG - rickmcinnis@dogwoodfabrics.com 14:58:28 08/02/10 (0)
- Too Late!! I am working with Gigabyte to get one. Thanks /nt\ - Julien43 08:54:28 08/03/10 (0)
- One way or the other!! - rickmcinnis@dogwoodfabrics.com 10:23:03 08/03/10 (0)
- RE: CMOS Checksum error when trying to access BIOS - theob 05:44:26 07/28/10 (0)
- RE: CMOS Checksum error when trying to access BIOS - Ryelands 05:00:00 07/28/10 (0)
- Update: No CMOS Checksum error.... BIOS set-up non-responsive - Julien43 03:28:07 07/28/10 (0)
- RE: Update: No CMOS Checksum error.... BIOS set-up non-responsive - gene_ 07:39:13 07/28/10 (0)
- Corrected BIOS instructions and 512 mB memory notes - rickmcinnis@dogwoodfabrics.com 17:12:36 07/27/10 (0)
- RE: Corrected BIOS instructions and 512 mB memory notes - tsearay 08:03:36 09/18/10 (0)
- -12v not needed for GA-G31M-S2L motherboard startup... - GStew 20:22:31 07/25/10 (0)
- RE: -12v not needed for GA-G31M-S2L motherboard startup... - jackwong96 07:51:48 07/28/10 (0)
- RE: -12v not needed for GA-G31M-S2L motherboard startup... - Mihaylov 10:56:03 07/28/10 (0)
- RE: -12v not needed for GA-G31M-S2L motherboard startup... - GStew 18:58:49 07/28/10 (0)
- RE: -12v not needed for GA-G31M-S2L motherboard startup... - Mihaylov 19:33:12 07/28/10 (0)
- RE: -12v not needed for GA-G31M-S2L motherboard startup... - GStew 19:55:25 07/28/10 (0)
- Things I learned last nite... - GStew 17:49:48 07/27/10 (0)
- RE: -12v not needed for GA-G31M-S2L motherboard startup... - gene_ 14:42:51 07/26/10 (0)
- RE: -12v not needed for GA-G31M-S2L motherboard startup... - audiofanatic 22:08:20 07/25/10 (0)
- Where would we be without brilliant mistakes? - rickmcinnis@dogwoodfabrics.com 12:30:20 07/26/10 (0)
- LOL! - GStew 20:29:54 07/28/10 (0)
- While looking at SSD's at NEWEGG I saw this ... - rickmcinnis@dogwoodfabrics.com 13:21:08 07/22/10 (0)
- Maybe this doesn't apply to XP Pro - rickmcinnis@dogwoodfabrics.com 13:25:54 07/22/10 (0)
- 2 x 512 mb ddr3 1333 Kingston Value-RAM $34.00 - rickmcinnis@dogwoodfabrics.com 15:33:22 07/21/10 (0)
- RE: 2 x 512 mb ddr3 1333 Kingston Value-RAM $34.00 - nagual19 03:34:14 12/12/10 (0)
- RE: 2 x 512 mb ddr3 1333 Kingston Value-RAM $34.00 - Julien43 16:28:55 07/21/10 (0)
- RE: 2 x 512 mb ddr3 1333 Kingston Value-RAM $34.00 - rickmcinnis@dogwoodfabrics.com 07:39:46 07/22/10 (0)
- RE: 2 x 512 mb ddr3 1333 Kingston Value-RAM $34.00 - Julien43 15:11:07 07/22/10 (0)
- RE: 2 x 512 mb ddr3 1333 Kingston Value-RAM $34.00 - smicyta 18:30:47 10/06/10 (0)
- nothing tricky about the 2nd power supply - rickmcinnis@dogwoodfabrics.com 20:44:14 07/22/10 (0)
- Anyone encounter problems with Gigabyte GA-H55M-UD2H ? - ArdRi 23:42:44 07/19/10 (0)
- I thought mine was defective - rickmcinnis@dogwoodfabrics.com 08:53:31 07/20/10 (0)
- Using 2 ATX PSUs?? - Julien43 06:07:42 07/18/10 (0)
- Thanks Guys - Julien43 18:36:48 07/19/10 (0)
- RE: Thanks Guys - GStew 16:44:21 07/22/10 (0)
- RE: Using 2 ATX PSUs?? - GStew 08:23:03 07/18/10 (0)
- RE: Using 2 ATX PSUs?? - smicyta 07:05:29 07/18/10 (0)
- RE: Using 2 ATX PSUs?? - GStew 08:31:59 07/18/10 (0)
- RE: Using 2 ATX PSUs?? - smicyta 20:56:38 07/18/10 (0)
- RE: Using 2 ATX PSUs?? - smicyta 19:29:31 07/18/10 (0)
- RE: Using 2 ATX PSUs?? - GStew 06:21:55 07/19/10 (0)
- 32nm update: DDR3-1333 OCZ RAM @ 512MB - cics 02:00:54 07/17/10 (0)
- RE: 32nm update: DDR3-1333 OCZ RAM @ 512MB - jackwong96 11:55:57 07/22/10 (0)
- Are you suggesting OCZ becauase you really like it? - rickmcinnis@dogwoodfabrics.com 11:22:13 07/17/10 (0)
- cics, do you have anything to tell about the HDD option in BIOS? - rickmcinnis@dogwoodfabrics.com 11:12:01 07/17/10 (0)
- Checking to see if one can post today - rickmcinnis@dogwoodfabrics.com 09:22:34 07/13/10 (0)
- Back to normal - rickmcinnis@dogwoodfabrics.com 09:23:43 07/13/10 (0)
- minlogon: it could be am I an idiot? - audiodan@tiscali.it 08:55:23 07/10/10 (0)
- Let's hope not! - ArdRi 02:41:49 07/11/10 (0)
- I'm ready to start my build... I think?? - Julien43 09:55:06 07/09/10 (5)
- Hope you find out how to get F9d BIOS and ... - rickmcinnis@dogwoodfabrics.com 13:33:12 07/09/10 (4)
- I just received a reply from Gigabyte concerning F9b BIOS - Julien43 14:11:54 07/12/10 (0)
- RE: Hope you find out how to get F9d BIOS and ... - Julien43 18:59:13 07/09/10 (3)
- Oh, yeah, DVD drive - rickmcinnis@dogwoodfabrics.com 09:58:39 07/10/10 (0)
- Try this one - Julien43 12:06:08 07/10/10 (0)
- Thanks - rickmcinnis@dogwoodfabrics.com 08:35:39 07/11/10 (0)
- RE: Thanks - tsearay 05:47:30 09/18/10 (0)
- f9d installed with no problems (BIOS suggestions in easy to use form) - rickmcinnis@dogwoodfabrics.com 16:11:45 07/11/10 (0)
- RE: f9d installed with no problems (BIOS suggestions in easy to use form) - tsearay 10:36:32 08/12/10 (0)
- RE: f9d installed with no problems (BIOS suggestions in easy to use form) - Julien43 03:41:38 07/12/10 (0)
- Stop your fretting! - rickmcinnis@dogwoodfabrics.com 08:27:01 07/12/10 (0)
- CPUZ latest version - rickmcinnis@dogwoodfabrics.com 16:13:38 07/11/10 (0)
- That link does not work and other stuff ... - rickmcinnis@dogwoodfabrics.com 09:39:21 07/10/10 (0)
- About remote control - Mihaylov 14:27:45 07/08/10 (0)
- minlogon and cmp shell - audiodan@tiscali.it 15:58:05 07/06/10 (0)
- RE: minlogon and cmp shell - play-mate 05:46:05 07/07/10 (0)
- RE: minlogon and cmp shell - audiodan@tiscali.it 14:53:59 07/07/10 (0)
- Dual 2.5 to 3.5 HDD adapter - Julien43 22:16:02 07/05/10 (0)
- New i3 Board questions - rickmcinnis@dogwoodfabrics.com 10:06:16 07/05/10 (0)
- Any further thoughts on using SSD for WINDOWS and programs? - rickmcinnis@dogwoodfabrics.com 11:26:22 07/02/10 (0)
- RE: Any further thoughts on using SSD for WINDOWS and programs? - monaco 00:31:19 07/05/10 (0)
- RE: Any further thoughts on using SSD for WINDOWS and programs? - Audio Bling 18:08:06 07/04/10 (0)
- Does the new GIGABYTE board need a video card? - rickmcinnis@dogwoodfabrics.com 11:22:30 07/02/10 (0)
- I SEE that it does not. - rickmcinnis@dogwoodfabrics.com 14:51:27 07/03/10 (0)
- Got the new i3 chip and GIGABYTE MB - conversion for heatsink? - rickmcinnis@dogwoodfabrics.com 17:33:25 07/01/10 (0)
- RE: Got the new i3 chip and GIGABYTE MB - conversion for heatsink? - AstroD 01:46:58 07/07/10 (0)
- Thanks for the recommendation - found what I was doing wrong - rickmcinnis@dogwoodfabrics.com 10:05:59 07/07/10 (0)
- THERMALRIGHT clashes with GIGABYTE board - rickmcinnis@dogwoodfabrics.com 19:59:36 07/06/10 (0)
- Found one at FROZENCPU - rickmcinnis@dogwoodfabrics.com 11:59:18 07/02/10 (0)
- HELP : minlogon is obstructing my new software - play-mate 14:12:49 06/25/10 (0)
- RE: HELP : minlogon is obstructing my new software - cics 01:11:55 06/27/10 (0)
- Okay, I'm starting to get exicited! - Julien43 08:37:03 06/19/10 (0)
- Please switch to new 32nm technology (Intel Core i3-530, ...) - cics 00:08:43 06/20/10 (0)
- RE: Please switch to new 32nm technology (Intel Core i3-530, ...) - Julien43 17:59:46 06/23/10 (0)
- PSU recommendations remain the same? - Bibo01 00:30:51 06/21/10 (0)
- RE: Please switch to new 32nm technology (Intel Core i3-530, ...) - Julien43 18:41:35 06/20/10 (0)
- Also make sure - steppe 23:04:40 06/25/10 (0)
- Thanks Steppe! - Julien43 03:24:57 06/26/10 (0)
- RE: Thanks Steppe! - seger 04:40:00 06/26/10 (0)
- RE: Thanks Steppe! - Mihaylov 20:23:42 06/26/10 (0)
- RE: Thanks Steppe! - seger 00:53:15 06/27/10 (0)
- For the sake of diplomacy.... - Julien43 21:21:14 06/27/10 (0)
- RE: Thanks Steppe! - Mihaylov 10:31:20 06/27/10 (0)
- RE: Thanks Steppe! - Ryelands 02:31:23 06/27/10 (0)
- RE: Thanks Steppe! - marcin_gps@go2.pl 02:06:18 06/27/10 (0)
- RE: Please switch to new 32nm technology (Intel Core i3-530, ...) - Mihaylov 11:31:25 06/21/10 (0)
- Much Thanks! I need all the help I can get!! /nt\ - Julien43 17:24:05 06/21/10 (0)
- RE: Please switch to new 32nm technology (Intel Core i3-530, ...) - cics 23:39:05 06/20/10 (0)
- RE: Please switch to new 32nm technology (Intel Core i3-530, ...) - Julien43 06:27:23 06/20/10 (0)
- WORLD FIRST SOUND CARD IS BORN! - lga775 15:40:35 06/15/10 (39)
- RE: WORLD FIRST SOUND CARD IS BORN! - Thorsten 05:45:49 06/16/10 (0)
- In other words, signal quality matters greatly - cics 09:28:58 06/16/10 (0)
- For SPDIF? Of course it does... - Thorsten 10:35:22 06/16/10 (0)
- RE: In other words, signal quality matters greatly - jackwong96 10:01:27 06/16/10 (0)
- RE: In other words, signal quality matters greatly - Thorsten 10:44:53 06/16/10 (0)
- RE: In other words, signal quality matters greatly - cics 10:08:41 06/17/10 (0)
- RE: In other words, signal quality matters greatly - Thorsten 08:07:29 09/30/10 (0)
- RE: In other words, signal quality matters greatly - Thorsten 10:17:57 06/17/10 (0)
- RE: In other words, signal quality matters greatly - cics 10:45:13 06/17/10 (0)
- RE: In other words, signal quality matters greatly - Thorsten 16:45:45 06/17/10 (0)
- RE: In other words, signal quality matters greatly - lga775 11:20:28 06/17/10 (0)
- RE: In other words, signal quality matters greatly - Thorsten 16:57:31 06/17/10 (0)
- RE: In other words, signal quality matters greatly - smicyta 08:31:52 06/18/10 (0)
- RE: In other words, signal quality matters greatly - Thorsten 09:26:29 06/18/10 (0)
- RE: In other words, signal quality matters greatly - lga775 12:24:56 06/16/10 (0)
- RE: In other words, signal quality matters greatly - Thorsten 21:08:56 06/16/10 (0)
- RE: In other words, signal quality matters greatly - jackwong96 11:38:47 06/16/10 (0)
- RE: In other words, signal quality matters greatly - Thorsten 11:44:40 06/16/10 (0)
- Congratulations! But.... - jackwong96 04:22:36 06/16/10 (0)
- RE: Congratulations! But.... - lga775 05:46:17 06/16/10 (0)
- RE: WORLD FIRST SOUND CARD IS BORN! - Mihaylov 16:22:00 06/15/10 (19)
- Some listening demo video of the TUBE SOUND CARD. - lga775 11:32:42 06/17/10 (0)
- RE: Some listening demo video of the TUBE SOUND CARD. - jackwong96 10:47:00 06/18/10 (0)
- RE: WORLD FIRST SOUND CARD IS BORN! - lga775 06:16:56 06/16/10 (16)
- RE: WORLD FIRST SOUND CARD IS BORN! - Mihaylov 18:03:51 06/19/10 (0)
- RE: WORLD FIRST SOUND CARD IS BORN! - lga775 05:51:34 06/20/10 (0)
- RE: WORLD FIRST SOUND CARD IS BORN! - Mihaylov 08:18:56 06/20/10 (0)
- Need a pdf document with detailed instructions, diagram and pictures - cics 09:32:36 06/16/10 (12)
- PDF DOCUMENTATION OF DIGITAL TUBE STAGE! - lga775 16:31:14 06/19/10 (10)
- RE: PDF DOCUMENTATION OF DIGITAL TUBE STAGE! - jackwong96 08:02:13 06/21/10 (6)
- Revised A New power circuit. - lga775 18:47:29 06/23/10 (0)
- When you ready send me updated pdf document for site. nt - cics 01:08:57 06/27/10 (0)
- RE: PDF DOCUMENTATION OF DIGITAL TUBE STAGE! - lga775 13:10:31 06/22/10 (0)
- RE: PDF DOCUMENTATION OF DIGITAL TUBE STAGE! - jackwong96 08:29:41 06/22/10 (0)
- RE: PDF DOCUMENTATION OF DIGITAL TUBE STAGE! - jackwong96 09:21:29 06/26/10 (0)
- RE: PDF DOCUMENTATION OF DIGITAL TUBE STAGE! - Thorsten 08:30:19 09/30/10 (0)
- RE: PDF DOCUMENTATION OF DIGITAL TUBE STAGE! - lga775 11:16:21 06/27/10 (0)
- RE: PDF DOCUMENTATION OF DIGITAL TUBE STAGE! - smicyta 17:45:53 06/22/10 (0)
- RE: PDF DOCUMENTATION OF DIGITAL TUBE STAGE! - Mihaylov 10:46:32 06/21/10 (0)
- RE: PDF DOCUMENTATION OF DIGITAL TUBE STAGE! - smicyta 17:58:28 06/20/10 (0)
- RE: PDF DOCUMENTATION OF DIGITAL TUBE STAGE! - Mihaylov 17:20:01 06/19/10 (0)
- RE: PDF DOCUMENTATION OF DIGITAL TUBE STAGE! - smicyta 04:27:02 06/20/10 (0)
- Need some time.. - lga775 09:47:04 06/16/10 (0)
- Choice of H55M Mobo for i3 530 32mn CPU - jackwong96 07:35:31 06/14/10 (0)
- RE: Choice of H55M Mobo for i3 530 32mn CPU - Audio Bling 17:59:34 06/30/10 (0)
- RE: Choice of H55M Mobo for i3 530 32mn CPU - jackwong96 20:40:58 07/01/10 (0)
- RE: Choice of H55M Mobo for i3 530 32mn CPU - Audio Bling 21:30:39 07/01/10 (0)
- RE: Choice of H55M Mobo for i3 530 32mn CPU - jackwong96 19:37:36 07/02/10 (0)
- Another Breakthrough in SQ - Extreme Mobo Modification - jackwong96 10:50:31 06/13/10 (0)
- Jack, thanks for leading the way... - GStew 16:56:35 06/13/10 (0)
- RE: Jack, thanks for leading the way... - jackwong96 07:07:39 06/14/10 (0)
- Help please. "ERROR:Unable to get Access priviledges" - satosong 04:09:22 06/12/10 (0)
- Run cMP as administrator.(nt) - riboge 05:44:24 06/12/10 (0)
- RE: Run cMP as administrator.(nt) - satosong 07:44:27 06/12/10 (0)
- RE: Run cMP as administrator.(nt) - seger 09:41:11 06/12/10 (0)
- Thank you very much, Mr.riboge and Mr.seger! - satosong 08:45:11 06/13/10 (0)
- Is there anyone has JULI@ circuit for digital? - lga775 07:40:32 06/11/10 (0)
- FOR JULI@ users: Removing output pulse trans could reveal more transparent sound! - lga775 07:34:34 06/11/10 (31)
- RE: FOR JULI@ users: Removing output pulse trans could reveal more transparent sound! - GStew 13:00:15 06/11/10 (30)
- RE: FOR JULI@ users: Removing output pulse trans could reveal more transparent sound! - lga775 13:39:25 06/11/10 (29)
- RE: FOR JULI@ users: Removing output pulse trans could reveal more transparent sound! - jackwong96 10:45:07 06/14/10 (28)
- RE: FOR JULI@ users: Removing output pulse trans could reveal more transparent sound! - theob 16:21:12 06/14/10 (0)
- thank you very much for your help. However.. - lga775 14:26:21 06/14/10 (26)
- Thanks! theob, Hello Lga 775 RE: ... However.. - jackwong96 07:35:01 06/15/10 (25)
- RE: Thanks! theob, Hello Lga 775 RE: ... However.. - smicyta 01:05:25 06/18/10 (0)
- RE: Thanks! theob, Hello Lga 775 RE: ... However.. - jackwong96 07:41:17 06/18/10 (0)
- YES! i've got it. - lga775 15:25:14 06/15/10 (22)
- CONFIRMED, removing trans will give you the sound! - lga775 11:25:54 06/17/10 (21)
- How about when using the I2S "output" - - rickmcinnis@dogwoodfabrics.com 11:09:17 06/25/10 (20)
- RE: How about when using the I2S "output" - - lga775 16:36:04 06/25/10 (19)
- RE: How about when using the I2S "output" - - theob 18:26:43 06/25/10 (18)
- RE: How about when using the I2S "output" - - jackwong96 11:34:38 06/26/10 (17)
- RE: How about when using the I2S "output" - - theob 14:44:25 06/26/10 (16)
- RE: How about when using the I2S "output" - - jackwong96 17:45:37 06/26/10 (15)
- RE: How about when using the I2S "output" - - theob 05:04:28 06/27/10 (14)
- RE: How about when using the I2S "output" - - jackwong96 07:12:10 06/27/10 (13)
- RE: How about when using the I2S "output" - - theob 05:07:04 06/29/10 (8)
- You are welcome! - jackwong96 10:23:15 06/30/10 (3)
- RE: You are welcome! - theob 11:19:41 06/30/10 (2)
- RE: You are welcome! - jackwong96 10:01:21 07/02/10 (1)
- RE: You are welcome! - theob 17:49:18 07/02/10 (0)
- The Story about a 0.01 Ohm Resistor - Part One - jackwong96 11:34:00 07/07/10 (0)
- RE: The Story about a 0.01 Ohm Resistor - Part One - theob 16:18:12 07/07/10 (0)
- RE: The Story about a 0.01 Ohm Resistor - Part One - smicyta 17:42:54 07/07/10 (0)
- RE: How about when using the I2S "output" - - smicyta 02:00:32 06/30/10 (0)
- RE: How about when using the I2S "output" - - theob 04:52:42 06/30/10 (0)
- RE: How about when using the I2S "output" - - smicyta 07:56:40 06/30/10 (0)
- RE: How about when using the I2S "output" - - theob 11:12:08 06/30/10 (0)
- RE: How about when using the I2S "output" - - theob 08:53:58 06/27/10 (0)
- I2S implementation - lga775 14:40:38 06/28/10 (0)
- RE: I2S implementation - theob 16:32:22 06/28/10 (0)
- RE: I2S implementation - lga775 22:21:07 07/02/10 (0)
- cMP optimization settings for Kernel Streaming - marcin_gps@go2.pl 09:18:20 06/07/10 (0)
- RE: cMP optimization settings for Kernel Streaming - cics 11:15:07 06/07/10 (0)
- RE: cMP optimization settings for Kernel Streaming - marcin_gps@go2.pl 13:43:50 06/07/10 (0)
- PCIE =) 4 x PCI Expansion Box - anyone tried? - marcin_gps@go2.pl 03:04:47 06/07/10 (0)
- RE: PCIE =) 4 x PCI Expansion Box - anyone tried? - marcin_gps@go2.pl 08:26:55 06/07/10 (0)
- Not sure cMP works for me, what do u suggest? - Triodeuser 09:43:24 06/05/10 (0)
- RE: Not sure cMP works for me, what do u suggest? - Dawnrazor 08:46:23 06/11/10 (0)
- Transcode m4a to FLAC with xrecode II... - gjwAudio 07:26:15 06/06/10 (0)
- My trouble - sato 09:43:01 06/05/10 (0)
- Breakthrough in SQ and 5V Current Consumption(1.8A) - H55MD2H - jackwong96 07:51:26 06/05/10 (7)
- RE: Breakthrough in SQ and 5V Current Consumption(1.8A) - H55MD2H - jackwong96 07:39:42 06/06/10 (0)
- Congratulations on this important step! A wild idea... - cics 00:16:03 06/06/10 (4)
- RE: Congratulations on this important step! A wild idea... - theob 03:55:17 06/06/10 (3)
- RE: Congratulations on this important step! A wild idea... - Ryelands 05:00:50 06/06/10 (2)
- RE: Congratulations on this important step! A wild idea... - jackwong96 05:32:02 06/06/10 (1)
- RE: Congratulations on this important step! A wild idea... - cics 06:39:09 06/06/10 (0)
- A Work Around! - jackwong96 10:10:36 06/06/10 (0)
- Need you to test current draw when display monitor is off. Also 2 more devices to disable! - cics 06:19:27 06/08/10 (0)
- gdrv off but no change in current consumption, 1394..... - jackwong96 07:37:55 06/13/10 (0)
- RE: gdrv off but no change in current consumption, 1394..... - cics 12:32:26 06/13/10 (0)
- 5V line is most critical supply. Could a simpler mod be done that just provides clean 5V line from linear PSU - jackwong96 08:51:22 06/14/10 (0)
- RE: 5V line is most critical supply. Could a simpler mod be done that just provides clean 5V line from linear PSU - cics 10:44:52 06/14/10 (0)
- RE: 5V line is most critical supply. Could a simpler mod be done that just provides clean 5V line from linear PSU - jackwong96 10:54:44 06/14/10 (0)
- RE: 5V line is most critical supply. Could a simpler mod be done that just provides clean 5V line from linear PSU - cics 11:22:22 06/14/10 (0)
- RE: gdrv off but no change in current consumption, 1394..... - Mihaylov 11:12:21 06/13/10 (0)
- RE: gdrv off but no change in current consumption, 1394..... - jackwong96 11:20:22 06/13/10 (0)
- RE: gdrv off but no change in current consumption, 1394..... - Mihaylov 11:26:27 06/13/10 (0)
- RE: gdrv off but no change in current consumption, 1394..... - jackwong96 11:42:44 06/13/10 (0)
- RE: Need you to test current draw when display monitor is off. Also 2 more devices to disable! - jackwong96 09:18:57 06/08/10 (0)
- RE: A Work Around! - cics 12:44:57 06/06/10 (0)
- RE: Congratulations on this important step! A wild idea... - theob 05:52:59 06/06/10 (0)
- RE: Breakthrough in SQ and 5V Current Consumption(1.8A) - H55MD2H - theob 16:11:51 06/05/10 (0)
- RE: Breakthrough in SQ and 5V Current Consumption(1.8A) - H55MD2H - jackwong96 08:19:28 06/06/10 (0)
- RE: Breakthrough in SQ and 5V Current Consumption(1.8A) - H55MD2H - theob 08:22:58 06/06/10 (0)
- RE: Breakthrough in SQ and 5V Current Consumption(1.8A) - H55MD2H - Mihaylov 10:02:25 06/05/10 (0)
- Win7 power plan settings and CMP priority - marcin_gps@go2.pl 23:46:08 06/04/10 (0)
- cMP shell on windows seven: it works ! - audiodan@tiscali.it 16:28:52 05/31/10 (0)
- RE: cMP shell on windows seven: it works ! - marcin_gps@go2.pl 02:35:19 06/01/10 (0)
- Linear Power Supplies for ATX & P4 - GStew 09:17:49 05/31/10 (10)
- Things I learned last nite... - GStew 17:51:58 07/27/10 (0)
- -12v not needed for GA-G31M-S2L motherboard startup... - GStew 18:47:48 07/25/10 (0)
- RE: Linear Power Supplies for ATX & P4 - Dawnrazor 15:41:33 05/31/10 (0)
- RE: Linear Power Supplies for ATX & P4 - GStew 15:21:03 05/31/10 (0)
- RE: Linear Power Supplies for ATX & P4 - GStew 18:48:24 06/01/10 (0)
- RE: Linear Power Supplies for ATX & P4 - jackwong96 07:14:19 06/02/10 (0)
- Morning update... - GStew 07:07:35 06/02/10 (0)
- Problem finally solved (Really this time!) & sonics... - GStew 12:49:12 07/08/10 (0)
- Supersonics!!! - GStew 21:23:00 07/10/10 (0)
- RE: Supersonics!!! - Dawnrazor 21:36:53 07/10/10 (0)
- RE: Linear Power Supplies for ATX & P4 - gene_ 14:59:33 05/31/10 (0)
- Tube Analogue Stage (DAC) Cum Pre-amp for CMP^2 - jackwong96 07:06:51 05/31/10 (0)
- RE: Tube Analogue Stage (DAC) Cum Pre-amp for CMP^2 - GStew 09:23:58 05/31/10 (0)
- RE: Tube Analogue Stage (DAC) Cum Pre-amp for CMP^2 - jackwong96 11:09:33 05/31/10 (0)
- RE: Tube Analogue Stage (DAC) Cum Pre-amp for CMP^2 - GStew 07:57:05 05/31/10 (0)
- RE: Tube Analogue Stage (DAC) Cum Pre-amp for CMP^2 - jackwong96 08:47:27 05/31/10 (0)
- RE: Tube Analogue Stage (DAC) Cum Pre-amp for CMP^2 - jackwong96 08:56:23 05/31/10 (0)
- Battery Drive CMP^Machine - jackwong96 09:08:56 05/31/10 (0)
- Alternative H55M Motherboard - Asrock H55M-LE - jackwong96 11:39:51 05/29/10 (0)
- RE: Alternative H55M Motherboard - new champ? - marcin_gps@go2.pl 04:36:06 05/31/10 (0)
- RE: Alternative H55M Motherboard - GA-H55M-D2H - jackwong96 10:03:40 05/30/10 (0)
- RE: Alternative H55M Motherboard - GA-H55M-D2H - AstroD 14:35:07 05/30/10 (0)
- Alternative Motherboards? GA-G41MT-ES2L? - erin 08:26:15 05/29/10 (0)
- H55M-UD2H + Core i3-530 (32nm) + Kingston DDR3-1333 1GB ValueRAM is a better choice - cics 11:51:39 05/29/10 (0)
- RE: Alternative Motherboards? GA-G41MT-ES2L? - jackwong96 11:46:15 05/29/10 (0)
- cMP and Vista - Fubart 00:50:19 05/28/10 (0)
- RE: cMP and Vista - folder browsing - cics 09:13:05 05/28/10 (0)
- I've search for but I'vn't found: cmp shell on windows 7 ultimate - audiodan@tiscali.it 14:56:32 05/23/10 (0)
- installing cMP2 - play-mate 02:53:43 05/29/10 (0)
- RE: installing cMP2 - audiodan@tiscali.it 08:16:41 05/29/10 (0)
- RE: I've search for but I'vn't found: cmp shell on windows 7 ultimate - jackwong96 19:52:37 05/23/10 (0)
- RE: I've search for but I'vn't found: cmp shell on windows 7 ultimate - audiodan@tiscali.it 22:26:00 05/23/10 (0)
- Question about PCI riser cable - Nikola 11:08:57 05/22/10 (0)
- : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - jackwong96 08:26:24 05/19/10 (0)
- battery powered cMP rig - play-mate 03:28:00 05/29/10 (0)
- RE: battery powered cMP rig - smicyta 06:21:32 05/29/10 (0)
- RE: battery powered cMP rig - jackwong96 11:03:37 05/30/10 (0)
- RE: battery powered cMP rig - smicyta 16:41:21 05/30/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - GStew 19:57:46 05/23/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - jackwong96 08:28:35 05/25/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - GStew 10:14:47 05/27/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - jackwong96 11:37:34 05/27/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - GStew 12:28:59 05/27/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - GStew 20:58:22 05/27/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - jackwong96 10:37:14 05/25/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - jackwong96 09:25:45 05/25/10 (0)
- Editing... - GStew 09:59:31 05/27/10 (0)
- Regulated Power Supplies - jackwong96 11:10:59 05/27/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - GStew 08:38:01 05/25/10 (0)
- Can you test with Core i3-530 32nm + GA-H55M-UD2H? - cics 11:32:04 05/24/10 (0)
- RE: Can you test with Core i3-530 32nm + GA-H55M-UD2H? - jackwong96 11:01:58 05/25/10 (0)
- A new type of mobo: Intel Server Mobo - cics 03:21:36 05/30/10 (0)
- RE: A new type of mobo: Intel Server Mobo - jackwong96 05:15:23 05/30/10 (0)
- Very interesting... - theob 09:59:28 05/30/10 (0)
- RE: Very interesting... - Mihaylov 13:22:11 05/30/10 (0)
- RE: Very interesting...SOUND & LAN CHIPS REMOVED - jackwong96 05:03:45 05/31/10 (0)
- Quote: "devices are being turned off in BIOS, the regulators are still running". Could this explain 5V load? - cics 23:29:14 05/31/10 (0)
- Devices still draw current when being turned off in BIOS - jackwong96 06:41:43 06/01/10 (0)
- RE: Devices still draw current when being turned off in BIOS - theob 07:29:16 06/01/10 (0)
- RE: Devices still draw current when being turned off in BIOS - jackwong96 07:55:52 06/01/10 (0)
- RE: Devices still draw current when being turned off in BIOS - jackwong96 09:50:00 06/01/10 (0)
- Bold Move : DVI to HDMI Convertor Removed - jackwong96 06:45:28 06/02/10 (0)
- RE: Devices still draw current when being turned off in BIOS - theob 08:35:48 06/01/10 (0)
- Some more refinements - cics 10:45:44 05/21/10 (0)
- RE: Some more refinements - marcin_gps@go2.pl 13:04:00 06/27/10 (0)
- RE: Some more refinements - theob 15:04:32 06/27/10 (0)
- RE: Some more refinements - marcin_gps@go2.pl 00:48:14 06/28/10 (0)
- RE: Some more refinements - theob 11:36:42 06/28/10 (0)
- RE: Some more refinements - marcin_gps@go2.pl 15:41:55 06/28/10 (0)
- RE: Some more refinements - theob 16:14:11 06/28/10 (0)
- RE: Some more refinements - marcin_gps@go2.pl 23:40:21 06/28/10 (0)
- RE: Some more refinements - theob 05:01:18 06/29/10 (0)
- RE: Some more refinements - marcin_gps@go2.pl 05:19:38 06/29/10 (0)
- RE: Some more refinements - theob 08:34:22 06/29/10 (0)
- RE: Some more refinements - jackwong96 04:20:56 05/23/10 (0)
- Feedback on DDR3 DRAM timings - cics 02:10:38 06/05/10 (0)
- RE: Feedback on DDR3 DRAM timings - jackwong96 04:59:55 06/19/10 (0)
- RE: Some more refinements - cics 22:55:14 05/23/10 (0)
- RE: Some more refinements - jackwong96 08:32:47 05/25/10 (0)
- PCI Latency Tool and DRAM Timings - cics 06:44:17 05/26/10 (0)
- RE: PCI Latency Tool and DRAM Timings - jackwong96 09:27:03 05/26/10 (0)
- RE: PCI Latency Tool and DRAM Timings - cics 11:45:52 05/26/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - cics 02:45:11 05/20/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - jackwong96 04:35:10 05/23/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - theob 13:15:04 05/19/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - jackwong96 07:25:09 05/20/10 (0)
- RE: : RE: *Power Consumption* Core i3-530 32nm + GA-H55M-UD2H - kclo 00:04:53 05/21/10 (0)
- Stunning performance with Peaktech ( velleman ) Linear PSU powering p24 & p4 - Fidelity Castro 10:26:15 05/18/10 (0)
- RE: Stunning performance with Peaktech ( velleman ) Linear PSU powering p24 & p4 - etiennelemay@gmail.com 17:13:11 08/11/10 (0)
- Chosing the right picoPSU model (which leaves the 12v line untouched) is important. - hfavandepas 06:41:32 08/17/10 (0)
- RE: Chosing the right picoPSU model (which leaves the 12v line untouched) is important. - etiennelemay@gmail.com 16:21:19 08/18/10 (0)
- congratulations ! Also check aerthing arrangements + correct 230 AC -plug positions - hfavandepas 02:35:10 08/19/10 (0)
- RE: congratulations ! Also check aerthing arrangements + correct 230 AC -plug positions - etiennelemay@gmail.com 17:40:28 08/19/10 (0)
- The Velleman is a linear PSU - hfavandepas 01:15:11 08/20/10 (0)
- RE: The Velleman is a linear PSU - etiennelemay@gmail.com 06:49:30 08/20/10 (0)
- RE: Stunning performance with Peaktech ( velleman ) Linear PSU powering p24 & p4 - GStew 15:52:25 08/12/10 (0)
- RE: Stunning performance with Peaktech ( velleman ) Linear PSU powering p24 & p4 - etiennelemay 11:15:16 06/09/10 (0)
- Velleman can power both P4 and Pico on P24 & choosing the right Pico model is important. - hfavandepas 01:15:27 06/14/10 (0)
- RE: Stunning performance with Peaktech ( velleman ) Linear PSU powering p24 & p4 - AstroD 01:32:22 05/25/10 (0)
- I think they´re all from the same manufacturer only differently branded... - Fidelity Castro 04:43:18 05/30/10 (0)
- RE: Stunning performance with Peaktech ( velleman ) Linear PSU powering p24 & p4 + other PS improvements - marcin_gps@go2.pl 03:08:39 05/28/10 (0)
- RE: Stunning performance with Peaktech ( velleman ) Linear PSU powering p24 & p4 + other PS improvements - Fidelity Castro 04:29:40 05/30/10 (0)
- RE: Stunning performance with Peaktech ( velleman ) Linear PSU powering p24 & p4 + other PS improvements - marcin_gps@go2.pl 04:23:19 05/31/10 (0)
- RE: Stunning performance with Peaktech ( velleman ) Linear PSU powering p24 & p4 + other PS improvements - Fidelity Castro 10:20:10 05/31/10 (0)
- RE: Stunning performance with Peaktech ( velleman ) Linear PSU powering p24 & p4 + other PS improvements - marcin_gps@go2.pl 10:45:05 05/31/10 (0)
- RE: Stunning performance with Peaktech ( velleman ) Linear PSU powering p24 & p4 + other PS improvements - Fidelity Castro 13:09:52 05/31/10 (0)
- RE: Stunning performance with Peaktech ( velleman ) Linear PSU powering p24 & p4 - nagual19 06:25:28 05/25/10 (0)
- Break-in report: Atom + Juli@ analog is stunning for the price - AstroD 14:46:11 05/14/10 (0)
- RE: Break-in report: Atom + Juli@ analog is stunning for the price - erin 08:09:47 05/29/10 (0)
- RE: Break-in report: Atom + Juli@ analog is stunning for the price - AstroD 10:56:23 05/29/10 (0)
- RE: Break-in report: Atom + Juli@ analog is stunning for the price - erin 18:19:13 05/29/10 (0)
- I wouldn't recommend Atom for heavy duty upsampling - cics 12:20:09 05/29/10 (0)
- RE: Break-in report: Atom + Juli@ analog is stunning for the price - cics 01:02:04 05/16/10 (0)
- RE: Break-in report: Atom + Juli@ analog is stunning for the price - AstroD 04:12:55 05/16/10 (0)
- RE: Break-in report: Atom + Juli@ analog is stunning for the price - cics 09:14:17 05/16/10 (0)
- RE: UD2H + 1212m analog + ultra clean AC - AstroD 15:13:02 05/16/10 (0)
- RE: UD2H + 1212m analog + ultra clean AC - cics 23:27:56 05/16/10 (0)
- RE: UD2H + 1212m analog + ultra clean AC - AstroD 02:56:01 05/17/10 (0)
- * Update * Core i3-530 32nm + Kingston HyperX DDR3-1375 1GB + GA-H55M-UD2H - cics 11:45:23 05/11/10 (0)
- Atom D510MO vs. Core i3 (GA-H55M-UD2H) - AstroD 23:50:40 05/19/10 (0)
- RE: Atom D510MO vs. Core i3 (GA-H55M-UD2H) - jackwong96 08:06:42 05/20/10 (0)
- RE: * Update * A wonderful new twist! - cics 08:22:40 05/15/10 (0)
- I do not see F9d BIOS at the GIGABYTE site? - rickmcinnis@dogwoodfabrics.com 15:01:14 07/03/10 (0)
- Its now F9 (previous F9d was a beta verion). nt - cics 23:02:22 07/03/10 (0)
- You've did a right thing! It's breaking through another level. - lga775 11:57:27 05/16/10 (0)
- I find the pci latency tool makes the sound too analytical! others is ok. - lga775 12:47:25 05/16/10 (0)
- RE: I find the pci latency tool makes the sound too analytical! others is ok. - cics 23:20:12 05/16/10 (0)
- pinging cics: If i plays 88.2khz on asio wat PCI latency should i set? and ASIO latency? - lga775 17:18:11 06/01/10 (0)
- Nope.. lol. i still prefer with untouch latency where it leads the way music should flow. - lga775 06:19:13 05/28/10 (0)
- Very good. - Bibo01 11:12:09 05/15/10 (0)
- RE: * Update * A wonderful new twist! - theob 09:56:34 05/15/10 (0)
- RE: * Update * A wonderful new twist! - cics 01:24:10 05/16/10 (0)
- RE: * Update * A wonderful new twist! - kclo 21:23:48 05/16/10 (0)
- RE: * Update * A wonderful new twist! - theob 03:07:50 05/16/10 (0)
- Doggone it!! nt - theob 09:47:03 05/15/10 (0)
- RE: UD2H + Juli@ analog - AstroD 17:06:23 05/13/10 (0)
- RE: D510MO + Juli@ analog - AstroD 19:58:50 05/13/10 (0)
- RE: D510MO + Juli@ analog - cics 01:05:47 05/16/10 (0)
- RE: D510MO + Juli@ analog - AstroD 04:18:48 05/16/10 (0)
- RE: Different Experience with Core i3-530 + GA-H55M-UD2H - jackwong96 06:05:35 05/13/10 (0)
- RE: Different Experience with Core i3-530 + GA-H55M-UD2H - cics 08:37:15 05/13/10 (0)
- J&W mainboards ? - Fidelity Castro 14:41:01 05/13/10 (0)
- RE: J&W mainboards ? - very interesting indeed! - cics 00:54:03 05/16/10 (0)
- RE: J&W mainboards ? - very interesting indeed! - Fidelity Castro 15:23:17 05/16/10 (0)
- A custom mini-itx mobo exclusive for audio whould be a big step forward - cics 23:35:29 05/16/10 (0)
- RE: A custom mini-itx mobo exclusive for audio whould be a big step forward - ForgotPassword 00:13:52 05/17/10 (0)
- RE: * Update * Core i3-530 32nm + Kingston HyperX DDR3-1375 1GB + GA-H55M-UD2H - Bibo01 23:39:54 05/12/10 (0)
- What is your entire system setup? sound card? amps? dacs? - lga775 11:30:51 05/12/10 (0)
- RE: What is your entire system setup? sound card? amps? dacs? - cics 08:41:50 05/13/10 (0)
- Could the MS Interrupt-Affinity Filter tool be of any benefit in a cMP setup? - hfavandepas 14:43:45 05/09/10 (0)
- Affinity Filter tool - play-mate 01:36:54 05/14/10 (0)
- RE: Affinity Filter tool - hfavandepas 06:21:16 05/16/10 (0)
- RE: Affinity Filter tool - cics 09:07:46 05/16/10 (0)
- RE: Affinity Filter tool - Marcin_gps 04:00:29 10/21/10 (0)
- No Hurry. - hfavandepas 09:22:53 05/16/10 (0)
- Lacking a search function for this thread... One question please.... for now ;) - Julien Therrien 23:31:42 05/06/10 (0)
- Thanks Guys!! - Julien43 18:00:33 05/07/10 (0)
- RE: Lacking a search function for this thread... One question please.... for now ;) - Ryelands 12:59:20 05/07/10 (0)
- Go with XP SP2/3 and avoid 64 bit version (avoids extra address lines). For Search use Ctrl+F in Browser. nt - cics 12:43:52 05/07/10 (0)
- Pinging cics: Hows the sound like comparing xp x86 to x64? i find it more detail. - lga775 01:00:54 05/11/10 (0)
- * NEW * Windows optimisation using Autoruns and gpedit (Group Policy editor) - cics 19:50:59 05/02/10 (0)
- RE: * NEW * Windows optimisation using Autoruns and gpedit (Group Policy editor) - gdillon 12:10:11 05/28/10 (0)
- RE: * NEW * Windows optimisation using Autoruns and gpedit (Group Policy editor) - cics 12:48:36 05/28/10 (0)
- * Update * These changes are no longer used - cics 07:41:34 05/15/10 (0)
- RE: * NEW * Windows optimisation using Autoruns and gpedit (Group Policy editor) - nola_powerman 09:03:16 05/08/10 (0)
- RE: * NEW * Windows optimisation using Autoruns and gpedit (Group Policy editor) - cics 00:42:25 05/09/10 (0)
- RE: * NEW * Windows optimisation using Autoruns and gpedit (Group Policy editor) - nola_powerman 18:42:44 05/09/10 (0)
- RE: * NEW * Windows optimisation using Autoruns and gpedit (Group Policy editor) - nola_powerman 20:26:37 05/12/10 (0)
- I have always wanted to eliminate AUTOPLAY - rickmcinnis@dogwoodfabrics.com 10:36:19 05/05/10 (0)
- Interesting Tweaks - theob 02:32:45 05/02/10 (0)
- RE: Interesting Tweaks - RayBan 07:23:24 05/02/10 (0)
- RE: Interesting Tweaks - theob 16:05:10 05/02/10 (0)
- RE: Interesting Tweaks - cics 18:43:31 05/02/10 (0)
- RE: Interesting Tweaks - theob 03:55:07 05/03/10 (0)
- * Pinging lga775 * Gigabyte GA-H55M-UD2H + Intel Core i3 32nm + 1GB Kingston DDR3 - cics 13:56:13 05/01/10 (0)
- others is fine.. but i cant go to 0.65 on graphics core. - lga775 09:59:33 05/04/10 (0)
- Graphics core now at 0.625 - try setting "Internal Graphics Clock" to 400 (lowest) instead of Auto. nt - cics 10:10:44 05/04/10 (0)
- yes the graphics clock is 400mhz, what is the fail safe voltage for graphics? - lga775 10:18:33 05/04/10 (0)
- Lowest for clean boot is 0.612. Another feature of mobo is "Cryptographic Services" which needs new approach - cics 09:05:54 05/05/10 (0)
- Good News!!! i am able to set my Graphics voltage to 0.65 as well as 0.65 for Vcore!!!! - lga775 05:01:03 05/08/10 (0)
- RE: Lowest for clean boot is 0.612. Another feature of mobo is "Cryptographic Services" which needs new approach - monaco 09:24:36 05/05/10 (0)
- Core i3 CPU temp measures matches RealTemp - this is a fisrt - cics 10:42:55 05/05/10 (0)
- RE: * Pinging lga775 * Gigabyte GA-H55M-UD2H + Intel Core i3 32nm + 1GB Kingston DDR3 - jackwong96 06:11:22 05/03/10 (0)
- cMP and cicsPlay - ERROR Player thread handle is NULL - goestrin 04:52:19 04/20/10 (0)
- RE: cMP and cicsPlay - ERROR Player thread handle is NULL - cics 09:49:08 04/20/10 (0)
- RE: cMP and cicsPlay - ERROR Player thread handle is NULL - goestrin 11:52:17 04/20/10 (0)
- RE: cMP and cicsPlay - ERROR Player thread handle is NULL - cics 21:32:48 04/20/10 (0)
- RE: cMP and cicsPlay - ERROR Player thread handle is NULL - goestrin 00:58:13 04/21/10 (0)
- RE: cMP and cicsPlay - ERROR Player thread handle is NULL - theob 05:41:42 04/20/10 (0)
- RE: cMP and cicsPlay - ERROR Player thread handle is NULL - goestrin 05:48:47 04/20/10 (0)
- RE: cMP and cicsPlay - ERROR Player thread handle is NULL - theob 06:14:29 04/20/10 (0)
- RE: cMP and cicsPlay - ERROR Player thread handle is NULL - goestrin 06:36:42 04/20/10 (0)
- SSD for cMP2 operating system - play-mate 03:31:18 04/15/10 (0)
- Long files bug?. - ivigueras@terra.es 01:57:49 04/12/10 (0)
- RE: cMP - the open source high-end Memory Player - Mihaylov 10:38:12 04/06/10 (41)
- RE: cMP - the open source high-end Memory Player - selmankalayci@gmail.com 02:13:16 11/19/16 (0)
- RE: cMP - the open source high-end Memory Player - smicyta 21:08:38 06/10/10 (0)
- RE: cMP - the open source high-end Memory Player - Mihaylov 11:34:03 06/11/10 (0)
- RE: cMP - the open source high-end Memory Player - smicyta 16:57:56 06/11/10 (0)
- RE: cMP - the open source high-end Memory Player - gene_ 16:21:15 04/12/10 (0)
- RE: cMP - the open source high-end Memory Player - Mihaylov 14:01:39 04/13/10 (0)
- RE: cMP - the open source high-end Memory Player - gene_ 16:02:56 04/13/10 (0)
- RE: cMP - the open source high-end Memory Player - Mihaylov 14:31:23 04/14/10 (0)
- RE: cMP - the open source high-end Memory Player - smicyta 19:50:41 06/20/10 (0)
- RE: cMP - the open source high-end Memory Player - gene_ 10:42:11 04/18/10 (0)
- RE: cMP - the open source high-end Memory Player - Mihaylov 11:35:22 04/18/10 (0)
- RE: cMP - the open source high-end Memory Player - gene_ 12:13:37 04/18/10 (0)
- RE: cMP - the open source high-end Memory Player - gene_ 15:17:26 04/14/10 (0)
- incredible job - ecir38 21:02:57 04/07/10 (0)
- RE: incredible job - Mihaylov 06:17:02 04/08/10 (0)
- Question re your pure linear PSU - cics 01:10:08 04/07/10 (15)
- RE: Question re your pure linear PSU - Mihaylov 16:52:21 04/07/10 (14)
- Pin layout question; and any way of producing that PSU for others? - cics 07:36:48 04/10/10 (0)
- RE: Pin layout question; and any way of producing that PSU for others? - Mihaylov 16:39:24 04/10/10 (0)
- RE: Question re your pure linear PSU - Bibo01 08:45:01 04/08/10 (11)
- RE: Question re your pure linear PSU - Mihaylov 15:49:36 04/08/10 (10)
- RE: Question re your pure linear PSU - Bibo01 06:15:40 04/09/10 (3)
- RE: Question re your pure linear PSU - Mihaylov 15:39:16 04/14/10 (2)
- RE: Question re your pure linear PSU - smicyta 20:43:07 04/15/10 (0)
- RE: Question re your pure linear PSU - Bibo01 03:08:10 04/16/10 (0)
- RE: Question re your pure linear PSU - Mihaylov 14:15:27 04/16/10 (0)
- Can you provide a low-res version of the pdf file? - cics 03:03:35 04/17/10 (0)
- RE: Can you provide a low-res version of the pdf file? - Mihaylov 09:26:23 04/17/10 (0)
- It wont open for me - Dawnrazor 07:46:59 04/15/10 (0)
- RE: It wont open for me - Dawnrazor 11:05:57 04/16/10 (0)
- RE: It wont open for me - ecir38 12:58:26 04/15/10 (0)
- It does open for me fine (nt) - Bibo01 10:27:53 04/15/10 (0)
- PDF details - ecir38 18:15:04 04/14/10 (0)
- RE: Question re your pure linear PSU - Mihaylov 18:03:16 04/08/10 (0)
- RE: Question re your pure linear PSU - Mihaylov 15:32:33 04/09/10 (0)
- RE: Question re your pure linear PSU - theob 16:29:07 04/13/10 (0)
- RE: Question re your pure linear PSU - Mihaylov 13:27:19 04/14/10 (0)
- RE: Question re your pure linear PSU - lga775 12:04:11 04/09/10 (0)
- RE: Question re your pure linear PSU - Mihaylov 14:10:37 04/09/10 (0)
- Thanks but... - Bibo01 11:56:43 04/06/10 (0)
- RE: Thanks but... - Mihaylov 12:08:57 04/06/10 (0)
- Problems with cMP shell - tom_on_wheels 02:40:49 04/05/10 (0)
- RE: Problems with cMP shell - Ryelands 03:50:18 04/05/10 (0)
- RE: Problems with cMP shell - tom_on_wheels 06:17:21 04/05/10 (0)
- RE: Problems with cMP shell - Ryelands 14:52:33 04/05/10 (0)
- RE: Problems with cMP shell - tom_on_wheels 06:33:01 04/06/10 (0)
- system runs - tom_on_wheels 00:50:15 04/09/10 (0)
- RE: system runs - Ryelands 04:13:48 04/09/10 (0)
- RE: system runs - tom_on_wheels 04:48:31 04/09/10 (0)
- To install 1212M driver to full modified cMP2 PC (AOB) - ionian 01:24:09 04/01/10 (6)
- RE: To install 1212M driver to full modified cMP2 PC (AOB) - Ryelands 01:31:58 04/01/10 (5)
- RE: To install 1212M driver to full modified cMP2 PC (AOB) - ionian 10:20:20 04/01/10 (4)
- RE: To install 1212M driver to full modified cMP2 PC (AOB) - cics 12:21:55 04/01/10 (3)
- RE: To install 1212M driver to full modified cMP2 PC (AOB) - ionian 01:09:25 04/02/10 (2)
- RE: To install 1212M driver to full modified cMP2 PC (AOB) - cics 23:13:53 04/02/10 (1)
- RE: To install 1212M driver to full modified cMP2 PC (AOB) - ionian 23:59:11 04/02/10 (0)
- RE: To install 1212M driver to full modified cMP2 PC (AOB) - ionian 03:48:08 04/05/10 (0)
- RE: To install 1212M driver to full modified cMP2 PC (AOB) - cics 01:22:43 04/07/10 (0)
- Intel Atom processor - could this be an alternative option? - cics 06:15:48 03/31/10 (0)
- RE: Intel Atom processor - could this be an alternative option? - Audio Bling 00:49:50 04/12/10 (0)
- RE: Intel Atom processor - could this be an alternative option? - cics 08:15:01 04/17/10 (0)
- RE: Intel Atom processor - could this be an alternative option? - bcfalls 16:21:08 03/31/10 (0)
- Wav files - tom_on_wheels 05:57:15 03/31/10 (0)
- RE: Wav files - smicyta 07:52:47 03/31/10 (0)
- RE: Wav files - tom_on_wheels 08:05:46 03/31/10 (0)
- RE: Wav files - cics 08:14:41 03/31/10 (0)
- RE: Wav files - tom_on_wheels 10:17:12 03/31/10 (0)
- malware detected in download link - dogly 09:08:21 03/27/10 (0)
- RE: malware detected in download link - Ryelands 09:35:41 03/27/10 (0)
- Internet Exploder Reports the main Site As Unsafe - ArdRi 14:23:07 03/27/10 (0)
- Good sound setting for cMP- i3 + h55-s2h + kingston hyperX + WinXP(x64) + JRMC 14 - lga775 11:36:57 03/24/10 (0)
- RAM timings have been key ingredient for me - seger 09:32:44 05/09/10 (0)
- RE: Good sound setting for cMP- i3 + h55-s2h + kingston hyperX + WinXP(x64) + JRMC 14 - ForgotPassword 00:50:50 04/15/10 (0)
- RE: Good sound setting for cMP- i3 + h55-s2h + kingston hyperX + WinXP(x64) + JRMC 14 - lga775 11:14:36 04/20/10 (0)
- Nice work! - cics 10:04:36 03/28/10 (0)
- RE: Nice work! - lga775 12:22:03 03/28/10 (0)
- What BIOS version are you using? Latest is F5. nt - cics 11:57:46 03/29/10 (0)
- Yes it is F5, Only F5 has ability of disabling spread spectrum. - lga775 12:00:42 03/29/10 (0)
- RE: Good sound setting for cMP- i3 + h55-s2h + kingston hyperX + WinXP(x64) + JRMC 14 - Dawnrazor 16:12:35 03/25/10 (0)
- ** Announcement ** New dedicated website (www.cicsMemoryPlayer.com) is live! - cics 01:22:19 03/21/10 (0)
- [help] 176.4khz upsampling not stable.. - lga775 05:55:04 03/16/10 (0)
- AT 900MHz, what is your CPU Load? - cics 10:50:29 03/17/10 (0)
- RE: AT 900MHz, what is your CPU Load? - lga77 11:19:46 03/17/10 (0)
- RE: AT 900MHz, what is your CPU Load? - lga775 11:29:48 03/17/10 (0)
- [help] gigabyte h55-s2h cpu voltage and motherboard bios setting. - lga775 09:53:30 03/13/10 (0)
- RE: [help] gigabyte h55-s2h cpu voltage and motherboard bios setting. - cics 03:33:09 03/14/10 (0)
- successfully running 0.65v @i3-530 vcore after cpu burn-in - lga775 05:58:32 03/16/10 (0)
- Was expecting to see lower vcore and 0.65V is excellent! - cics 10:52:12 03/17/10 (0)
- RE: Was expecting to see lower vcore and 0.65V is excellent! - lga775 11:33:50 03/17/10 (0)
- RE: [help] gigabyte h55-s2h cpu voltage and motherboard bios setting. - lga775 11:44:02 03/14/10 (0)
- RE: [help] gigabyte h55-s2h cpu voltage and motherboard bios setting. - theob 11:57:54 03/14/10 (0)
- Please recommend mouse for remote - Bibo01 03:54:55 03/05/10 (0)
- I really like my Microsoft Arc-Mouse... - GStew 17:57:25 03/06/10 (0)
- RE: I really like my Microsoft Arc-Mouse... - play-mate 15:54:19 03/07/10 (0)
- RE: I really like my Microsoft Arc-Mouse... - smicyta 07:32:12 03/08/10 (0)
- RE: Please recommend mouse for remote - RayBan 07:17:52 03/05/10 (0)
- Power cord experience - Dawnrazor 21:32:46 03/04/10 (0)
- RE: Power cord experience - theob 03:18:36 03/05/10 (0)
- RE: Power cord experience - Dawnrazor 08:01:39 03/05/10 (0)
- RE: Power cord experience - theob 08:36:48 03/05/10 (0)
- RE: Power cord experience - Dawnrazor 12:52:08 03/05/10 (0)
- RE: Power cord experience - theob 13:37:49 03/05/10 (0)
- RE: Power cord experience - tsearay 14:25:15 03/05/10 (0)
- RE: Power cord experience - Dawnrazor 17:48:01 03/05/10 (0)
- RE: Power cord experience - smicyta 23:39:00 03/04/10 (0)
- Alternate USB questions - smicyta 06:41:12 03/03/10 (0)
- Allocation unit for disk formatting music drive - Bibo01 12:18:24 03/02/10 (0)
- RE: Allocation unit for disk formatting music drive - Ryelands 13:44:47 03/02/10 (0)
- How to allocate unit for disk formatting on a cMP system? - Bibo01 10:39:08 10/31/10 (0)
- RE: How to allocate unit for disk formatting on a cMP system? - Ryelands 16:48:41 10/31/10 (0)
- RE: How to allocate unit for disk formatting on a cMP system? - Mihaylov 15:04:23 10/31/10 (0)
- RE: Allocation unit for disk formatting music drive - Bibo01 15:14:22 03/02/10 (0)
- from old computer to i3 will it sound difference? - lga775 07:34:19 02/27/10 (0)
- buffer size and resampler - marcin_gps@go2.pl 03:30:59 02/27/10 (0)
- cPlay playlist ? - marcin_gps@go2.pl 03:28:45 02/27/10 (0)
- cMP error - someone help please! - fling 13:29:32 02/26/10 (0)
- Tick "No" to RAM load - seger 03:03:40 02/27/10 (0)
- RE: Tick "No" to RAM load - fling 13:14:53 02/27/10 (0)
- RE: cMP error - someone help please! - riboge 16:02:18 02/26/10 (0)
- RE: cMP error - someone help please! - Ryelands 14:10:45 02/26/10 (0)
- RE: cMP error - someone help please! - fling 15:12:21 02/26/10 (0)
- Alternative mobos - pertube 04:34:33 02/26/10 (0)
- RE: Alternative mobos - Dawnrazor 09:25:31 02/26/10 (0)
- RE: Alternative mobos - cics 08:28:03 02/26/10 (0)
- Creating an image file of the system drive - smicyta 22:30:22 02/19/10 (0)
- RE: Creating an image file of the system drive - Ryelands 01:53:23 02/20/10 (0)
- RE: Creating an image file of the system drive - smicyta 05:20:14 02/21/10 (0)
- RE: cMP - the open source high-end Memory Player - marcin_gps@go2.pl 16:13:43 02/19/10 (0)
- WaveLink - edward 11:48:11 02/20/10 (0)
- RE: WaveLink - marcin_gps@go2.pl 15:37:44 02/20/10 (0)
- "ASIO is bad for audio playback" is an illogical comment. ASIO is just a standard! - cics 06:32:37 02/23/10 (0)
- RE: "ASIO is bad for audio playback" is an illogical comment. ASIO is just a standard! - lga775 12:43:36 02/25/10 (0)
- RE: "ASIO is bad for audio playback" is an illogical comment. ASIO is just a standard! - tsearay 09:33:31 02/24/10 (0)
- RE: "ASIO is bad for audio playback" is an illogical comment. ASIO is just a standard! - tsearay 12:08:08 02/24/10 (0)
- RE: WaveLink - Dawnrazor 02:16:41 02/22/10 (0)
- RE: WaveLink - edward 17:43:35 02/20/10 (0)
- RE: WaveLength - Dawnrazor 19:04:15 02/21/10 (0)
- RE: WaveLink - marcin_gps@go2.pl 02:19:16 02/21/10 (0)
- RE: WaveLink - edward 11:56:38 02/21/10 (0)
- Win32PrioritySeparation - edward 11:35:51 02/20/10 (0)
- RE: Win32PrioritySeparation - Ryelands 03:04:56 02/21/10 (0)
- RE: Win32PrioritySeparation - marcin_gps@go2.pl 02:26:01 02/21/10 (0)
- RE: Win32PrioritySeparation - marcin_gps@go2.pl 15:30:26 02/20/10 (0)
- RE: cMP - the open source high-end Memory Player - GStew 06:39:46 02/20/10 (0)
- RE: cMP - the open source high-end Memory Player - marcin_gps@go2.pl 03:23:00 02/27/10 (0)
- RE: cMP - the open source high-end Memory Player - marcin_gps@go2.pl 05:15:09 02/20/10 (0)
- RE: cMP - the open source high-end Memory Player - Dawnrazor 19:53:01 02/19/10 (0)
- RE: cMP - the open source high-end Memory Player - marcin_gps@go2.pl 02:09:43 02/20/10 (0)
- Pollution noise - Pokorny 03:07:03 02/14/10 (0)
- RE: Pollution noise - cics 07:02:36 02/15/10 (0)
- Touch screen usability - LxOfIth 12:46:30 01/31/10 (0)
- RE: Touch screen usability - Dawnrazor 16:08:33 02/14/10 (0)
- Buffa-Juli@... and a question for Theob! - GStew 11:53:00 01/31/10 (0)
- RE: Buffa-Juli@... and a question for Theob! - theob 14:32:45 01/31/10 (0)
- RE: Buffa-Juli@... and a question for Theob! - GStew 16:58:08 01/31/10 (0)
- RE: Buffa-Juli@... and a question for Theob! - theob 02:54:33 02/01/10 (0)
- RE: Buffa-Juli@... and a question for Theob! - GStew 09:24:25 02/01/10 (0)
- RE: Buffa-Juli@... and a question for Theob! - theob 09:47:37 02/01/10 (0)
- RE: cMP - First Message. Suggestion on system. CMI 8768. - rst 13:14:40 01/30/10 (0)
- RE: cMP - XP or Windows 7 ? - chevron 07:13:25 01/28/10 (0)
- RE: cMP - XP or Windows 7 ? - Dawnrazor 09:37:18 01/28/10 (0)
- RE: cMP - XP or Windows 7 ? - RayBan 08:55:02 01/28/10 (0)
- G31 vs H55 platform, which is better in sounding? - lga775 09:41:23 01/20/10 (0)
- [help] can cMP custom bios on Gigabyte G31M-ES2L? - lga775 06:05:20 01/15/10 (0)
- RE: [help] can cMP custom bios on Gigabyte G31M-ES2L? - GStew 09:02:02 01/18/10 (0)
- RE: [help] can cMP custom bios on Gigabyte G31M-ES2L? - lga775 09:37:56 01/20/10 (0)
- RE: [help] can cMP custom bios on Gigabyte G31M-ES2L? - GStew 09:57:35 01/20/10 (0)
- RE: [help] can cMP custom bios on Gigabyte G31M-ES2L? - smicyta 05:48:38 03/15/10 (0)
- RE: cMP - the open source high-end Memory Player - hoverdonkey 16:39:13 01/14/10 (0)
- RE: cMP - the open source high-end Memory Player - Ryelands 00:33:05 01/15/10 (0)
- Oh well, it's all part of the charm. - hoverdonkey 05:44:01 01/15/10 (0)
- cmp + Foobar ks vs. cmp + cPlay - hoverdonkey 16:17:03 01/07/10 (0)
- I prefer Foobar ks - Mr Underhill 09:10:20 01/09/10 (0)
- RE: I prefer Foobar ks - Dawnrazor 21:47:03 03/27/10 (0)
- RE: I prefer Foobar ks - me too! - hoverdonkey 12:08:02 01/10/10 (0)
- I found Cuesheet Creator for 0.9 works in v.1.0 - ArdRi 14:37:30 03/27/10 (0)
- RE: I prefer Foobar ks - hoverdonkey 10:00:53 01/09/10 (0)
- Foobar -vs- HiFace - Mr Underhill 15:57:14 01/12/10 (1)
- Intel officially launched the much awaited 32nm Core i3 CPU - cics 11:14:22 01/07/10 (0)
- Choice of mobo: S2H vs UD2H - cics 19:52:06 01/09/10 (0)
- RE: Choice of mobo: S2H vs UD2H - aljordan 07:18:40 01/27/10 (0)
- RE: Intel officially launched the much awaited 32nm Core i3 CPU - S76 17:18:29 01/09/10 (0)
- RE: Intel officially launched the much awaited 32nm Core i3 CPU - aljordan 14:54:24 01/09/10 (0)
- The Clarkdale does seem very promising. Aside from the lowered power consumption... - ForgotPassword 12:03:41 01/07/10 (0)
- RE: The Clarkdale does seem very promising. Aside from the lowered power consumption... - cics 13:11:26 01/07/10 (0)
- Thank you for telling me that. No G6950 then, i3 it is! - ForgotPassword 18:35:26 01/07/10 (0)
- cMP and AMD Over Drive - Bibo01 13:12:12 01/02/10 (0)
- RE: cMP and AMD Over Drive - Ryelands 03:14:45 01/03/10 (0)
- memory timings -how to go about it ? - play-mate 06:00:57 12/16/09 (0)
- RE: memory timings -showstopping ? - play-mate 18:56:40 12/27/09 (0)
- RE: memory timings -showstopping ? - Ryelands 05:03:10 12/28/09 (0)
- memory timings - play-mate 05:22:29 12/28/09 (0)
- RE: memory timings - Ryelands 06:37:25 12/28/09 (0)
- Anybody using dc-filters on the 12V, 5V and 3,3V DC power supply lines? - hfavandepas 15:09:13 12/14/09 (0)
- RE: Anybody using dc-filters on the 12V, 5V and 3,3V DC power supply lines? - apolinaris 05:22:24 12/16/09 (0)
- RE: Anybody using dc-filters on the 12V, 5V and 3,3V DC power supply lines? - Ryelands 01:34:02 12/15/09 (0)
- the common mode keeps the 0 Volt 'cleaner'. So may be better SQ - hfavandepas 04:25:50 12/15/09 (0)
- RE: Anybody using dc-filters on the 12V, 5V and 3,3V DC power supply lines? - play-mate 18:59:14 12/14/09 (0)
- RE: Anybody using dc-filters on the 12V, 5V and 3,3V DC power supply lines? - hfavandepas 06:33:41 12/15/09 (0)
- CMP- Zalman HD160xt front panel usb - harrybamboo 13:38:03 12/13/09 (0)
- HDD guidance - harrybamboo 10:17:23 12/04/09 (0)
- RE: HDD guidance - Ryelands 10:43:54 12/04/09 (0)
- RE: HDD guidance - GStew 16:00:17 12/05/09 (0)
- RE: HDD guidance - harrybamboo 10:54:15 12/06/09 (0)
- assigning processes on dual core CPU - play-mate 10:07:08 12/03/09 (1)
- cMP does it for windows & player. cPlay 2.0b33 has just been released and supports VST:-) - cics 07:54:56 12/04/09 (0)
- earthing arrangements and position of ‘Live’ and ‘Neutral’ - hfavandepas 08:20:23 12/03/09 (0)
- RE: earthing arrangements and position of ‘Live’ and ‘Neutral’ - GStew 20:55:24 12/12/09 (0)
- RE: earthing arrangements and position of ‘Live’ and ‘Neutral’ - hfavandepas 11:14:34 12/14/09 (0)
- What little I know about Neutral and grounds... (LONG, OF COURSE!) - GStew 16:30:31 12/05/09 (0)
- Looks like grounding rules in digital systems are comparable to analog systems - hfavandepas 11:09:53 12/09/09 (0)
- RE: Looks like grounding rules in digital systems are comparable to analog systems - theob 07:49:19 12/10/09 (0)
- Thankx for the generous feedback. Is there difference in your setup? - hfavandepas 15:36:19 12/07/09 (0)
- cMP -newbie stuck in the desktop... - numeri 08:06:54 12/02/09 (0)
- That's a Vista problem - get Windows 7 instead - seger 13:39:19 12/02/09 (0)
- RE: That's a Vista problem - get Windows 7 instead - Fubart 05:20:41 05/25/10 (0)
- RE: cMP - cue files not found - chevron 02:39:37 11/25/09 (0)
- RE: cMP - cue files not found - Ryelands 06:25:16 11/25/09 (0)
- RE: cMP - cue files not found - chevron 05:39:13 11/26/09 (0)
- AHK script used in cMP (cicsRemote.exe) - cics 10:09:12 11/20/09 (0)
- Revised AHK script for use in CMP Mode allowing for Display Off when pressing mouse button 2 - cics 02:54:18 11/21/09 (0)
- RE: Revised AHK script for use in CMP Mode allowing for Display Off when pressing mouse button 2 - etiennelemay@gmail.com 11:26:47 11/21/09 (0)
- Full function remote using just 3 button mouse - cics 22:08:48 11/21/09 (0)
- Thanks for the 3-button version - etiennelemay@gmail.com 09:29:37 11/22/09 (0)
- Display Off tested on 2 machines BUT they have VGA drivers - need to look into it. Thx. nt - cics 07:15:53 11/23/09 (0)
- RE: Display Off tested on 2 machines BUT they have VGA drivers - need to look into it. Thx. nt - Apokalypse 15:15:25 02/11/10 (0)
- RE: Display Off tested on 2 machines BUT they have VGA drivers - need to look into it. Thx. nt - cics 01:46:30 02/14/10 (0)
- RE: Display Off tested on 2 machines BUT they have VGA drivers - need to look into it. Thx. nt - Apokalypse 14:36:16 02/15/10 (0)
- Same here though Phase works - Dawnrazor 14:05:25 02/12/10 (0)
- P24 current measurements. - hfavandepas 03:37:54 11/18/09 (0)
- RE: P24 current measurements. - Bertel 05:01:53 11/18/09 (0)
- RE: P24 current measurements. - hfavandepas 06:55:44 11/18/09 (0)
- RE: P24 current measurements. - cics 09:52:08 11/18/09 (0)
- results extra current measurements 5 Volt rail of P24 connector - hfavandepas 12:15:27 11/19/09 (0)
- RE: results extra current measurements 5 Volt rail of P24 connector - Bertel 12:50:18 11/19/09 (0)
- grr a typo. 2,06/05 Amps must be:3,06/05 Amps - hfavandepas 13:40:13 11/19/09 (0)
- Very useful RAM measurements indeed - cics 02:16:12 11/20/09 (0)
- 2,87/88 versus 2,87. I only used a simple the multi-meter - hfavandepas 03:40:04 11/20/09 (0)
- RE: 2,87/88 versus 2,87. I only used a simple the multi-meter - cics 10:18:40 11/20/09 (0)
- RE: P24 current measurements. - theob 06:21:56 11/19/09 (0)
- RE: P24 current measurements. - hfavandepas 13:48:55 11/19/09 (0)
- RE: P24 current measurements. - theob 06:30:40 11/22/09 (0)
- I gladly do some extra measurements - hfavandepas 11:25:01 11/18/09 (0)
- RE: P24 current measurements. - Bertel 07:13:55 11/18/09 (0)
- RE: P24 current measurements. - gene_ 07:47:59 11/22/09 (0)
- Thank you for demystifying the ATX start-up process. Would a relay also work? - hfavandepas 14:05:42 11/23/09 (0)
- RE: Thank you for demystifying the ATX start-up process. Would a relay also work? - gene_ 14:05:31 11/24/09 (0)
- It works in my setup too ! Giving the PWR_OK signal manually, is indeed not time critical. - hfavandepas 10:16:37 11/25/09 (0)
- RE: It works in my setup too ! Giving the PWR_OK signal manually, is indeed not time critical. - gene_ 14:14:52 11/25/09 (0)
- RE: P24 current measurements. - Bertel 08:36:57 11/22/09 (0)
- RE: P24 current measurements. - gene_ 13:49:48 11/22/09 (0)
- This is a great breakthrough. Congratulations! Some questions... - cics 01:19:28 11/23/09 (0)
- RE: This is a great breakthrough. Congratulations! Some questions... - gene_ 14:27:15 11/23/09 (0)
- RE: P24 current measurements. - gene_ 09:48:11 11/22/09 (0)
- RE: P24 current measurements. - gene_ 09:45:15 11/22/09 (0)
- RE: P24 current measurements. - Bertel 14:17:03 11/22/09 (0)
- RE: P24 current measurements. - hfavandepas 08:56:17 11/18/09 (0)
- RE: P24 current measurements. - Bertel 09:21:36 11/18/09 (0)
- Change off plans. PSU Improvements part 3 (almost) solved. Thankx to Gene_. - hfavandepas 14:34:04 11/25/09 (0)
- Things get even simpler if you simply - ForgotPassword 00:27:17 11/26/09 (0)
- You’re right. The pico stays useful. It can do ‘the talking’ to the PCC - hfavandepas 02:42:35 11/26/09 (0)
- Three linear supplies (12V, 5V, 3.3V) and a Pico - that's all we really need. - ForgotPassword 04:07:11 11/26/09 (0)
- Thank you for helping making the choice: option 1 it will be than - hfavandepas 09:51:30 11/18/09 (0)
- * NEW * Alternative approach to CPU (P4) power supply - cics 04:48:08 11/15/09 (0)
- RE: * NEW * Alternative approach to CPU (P4) power supply - AstroD 17:47:27 05/16/10 (0)
- RE: * NEW * Alternative approach to CPU (P4) power supply - audiofanatic 02:25:54 07/29/10 (0)
- RE: * NEW * Alternative approach to CPU (P4) power supply - ForgotPassword 18:14:01 05/16/10 (0)
- RE: * NEW * Alternative approach to CPU (P4) power supply - AstroD 21:50:30 05/16/10 (0)
- RE: * NEW * Alternative approach to CPU (P4) power supply - AstroD 02:44:36 05/19/10 (0)
- See link - theob 04:20:29 05/19/10 (0)
- RE: See link - ForgotPassword 04:36:51 05/19/10 (0)
- RE: * NEW * Alternative approach to CPU (P4) power supply - ForgotPassword 23:35:05 05/16/10 (0)
- Are switchers a bit of a turn off? - Ryelands 04:43:03 11/16/09 (0)
- Why shouldn't we treat the CPU as a dirty device? - cics 09:18:05 11/18/09 (0)
- RE: Why shouldn't we treat the CPU as a dirty device? - JamesB 14:44:32 12/13/09 (0)
- RE: * NEW * Alternative approach to CPU (P4) power supply - Bertel 08:56:02 11/15/09 (0)
- RE: * NEW * Alternative approach to CPU (P4) power supply - cics 11:37:09 11/15/09 (0)
- RE: * NEW * Alternative approach to CPU (P4) power supply - Bertel 12:01:44 11/15/09 (0)
- 'ranking' bypassing the MoBo - hfavandepas 05:27:10 11/16/09 (0)
- RE: 'ranking' bypassing the MoBo - Dawnrazor 08:51:39 11/19/09 (0)
- Most likely I corrected – without knowing- some mismatch or sub-optimal situation. - hfavandepas 10:32:05 11/19/09 (0)
- RE: 'ranking' bypassing the MoBo - Bertel 06:29:59 11/16/09 (0)
- RE: * NEW * Alternative approach to CPU (P4) power supply - theob 16:10:41 11/15/09 (0)
- RE: cMP - the open source high-end Memory Player - Windows X 10:50:58 11/08/09 (0)
- voltage settings and resolution - play-mate 18:49:36 11/07/09 (0)
- RE: cMP - Gigabyte mainboard problem - alba63 13:37:10 10/31/09 (7)
- RE: cMP - Gigabyte mainboard problem - Audio Bling 15:14:10 10/31/09 (6)
- RE: cMP - Gigabyte mainboard problem - Dawnrazor 16:27:25 10/31/09 (0)
- RE: cMP - Gigabyte mainboard problem - alba63 15:42:06 10/31/09 (4)
- RE: cMP - Gigabyte mainboard problem - DeDe 03:53:12 11/01/09 (3)
- RE: cMP - Gigabyte mainboard problem - alba63 04:03:58 11/01/09 (0)
- RE: cMP - Gigabyte mainboard problem - DeDe 04:50:40 11/01/09 (0)
- RE: cMP - Gigabyte mainboard problem - alba63 05:26:57 11/01/09 (0)
- RE: cMP - Gigabyte mainboard problem - DeDe 06:16:08 11/01/09 (0)
- RE: cMP - Gigabyte mainboard problem - theob 08:06:28 11/01/09 (0)
- RE: cMP - Gigabyte mainboard problem - theob 06:26:13 11/01/09 (0)
- RE: cMP - Gigabyte mainboard problem - alba63 10:11:59 11/01/09 (0)
- Updates to Juli@ Follies Post WAAAY below... - GStew 10:46:58 10/11/09 (0)
- Somehow I missed it but: the new documentation is great !! - hfavandepas 03:34:04 09/24/09 (0)
- forum thread navigation - and renewed request to cPlay - play-mate 19:48:41 10/02/09 (0)
- RE: forum thread navigation - and renewed request to cPlay - cics 06:31:21 10/04/09 (0)
- RE: forum thread navigation - and renewed request to cPlay - Dawnrazor 12:14:51 10/04/09 (0)
- VST plugin support for Allocator may be the easiest way - cics 16:18:59 10/05/09 (0)
- RE: VST plugin support for Allocator may be the easiest way - Dawnrazor 20:39:19 10/05/09 (0)
- Here is one example - Dawnrazor 20:56:54 10/05/09 (0)
- Won't plug-in need to handle sample rates up to192kHz? nt - Ebit 00:16:44 10/06/09 (0)
- Only if you are upsampling and - Dawnrazor 06:57:18 10/06/09 (0)
- cMP & JACK - play-mate 03:55:58 10/05/09 (0)
- RE: cMP & JACK - Dawnrazor 06:45:36 10/05/09 (0)
- RE: forum thread navigation - and renewed request to cPlay - play-mate 07:07:16 10/04/09 (0)
- Window Activation - ecir38 11:51:03 09/14/09 (0)
- Implement MINLOGON - rickmcinnis@dogwoodfabrics.com 18:59:23 09/19/09 (0)
- MINLOGON -crash ! XPlite file protection ?? - play-mate 07:57:26 10/07/09 (0)
- RE: MINLOGON -crash ! XPlite file protection ?? - seger 02:22:58 10/08/09 (0)
- MINLOGON -where will my .vbs threads go ? - play-mate 18:34:21 09/27/09 (0)
- RE: MINLOGON -where will my .vbs threads go ? - seger 02:18:18 09/28/09 (0)
- RE: MINLOGON -where will my .vbs threads go ? - ForgotPassword 02:48:21 09/28/09 (0)
- RE: MINLOGON -where will my .vbs threads go ? - Ryelands 03:22:10 09/28/09 (0)
- Can we retest E5200? - cics 23:40:23 09/19/09 (0)
- Just saw your request - rickmcinnis@dogwoodfabrics.com 07:44:49 10/03/09 (0)
- RE: Just saw your request - cics 06:25:57 10/04/09 (0)
- RE: Window Activation - RayBan 13:32:34 09/14/09 (0)
- RE: Window Activation - edward 13:47:17 09/14/09 (0)
- Should have read all of the posts!!! - rickmcinnis@dogwoodfabrics.com 19:00:11 09/19/09 (0)
- Thanks - ecir38 14:59:09 09/14/09 (0)
- Minlogon - ecir38 05:51:46 09/16/09 (0)
- CPU temp - ecir38 21:51:22 09/05/09 (0)
- RE: CPU temp - cics 03:21:00 09/06/09 (0)
- Bios says one thing and Cpuid says another - Dawnrazor 13:43:36 09/03/09 (0)
- RE: Bios says one thing and Cpuid says another - RayBan 10:52:45 09/05/09 (0)
- RE: Bios says one thing and Cpuid says another - Dawnrazor 13:22:05 09/05/09 (0)
- Update - Dawnrazor 18:33:55 09/03/09 (0)
- RE: Update - edward 18:58:03 09/03/09 (0)
- RE: Update - Dawnrazor 20:04:12 09/03/09 (0)
- RE: Update - ecir38 21:11:25 09/03/09 (0)
- cMP vs Linn DS? - wcvb 07:50:27 08/30/09 (0)
- RE: cMP vs Linn DS? - Dawnrazor 22:13:35 08/30/09 (0)
- My cMP 100% batterie feeded - hanssatink 02:58:42 08/30/09 (0)
- RE: My cMP 100% batterie feeded - cics 07:48:54 08/30/09 (0)
- RE: My cMP 100% batterie feeded - hanssatink 07:57:09 08/31/09 (0)
- RE: My cMP 100% batterie feeded - theob 05:07:41 08/30/09 (0)
- Anyone with the GA-G31M-ES2L know which - Dawnrazor 07:55:37 08/29/09 (0)
- RE: Anyone with the GA-G31M-ES2L know which - GStew 09:56:36 08/29/09 (0)
- RE: Anyone with the GA-G31M-ES2L know which - Dawnrazor 22:16:06 08/30/09 (0)
- Bios Question - Dawnrazor 13:13:14 08/28/09 (7)
- Special BIOS and new documentation! - cics 23:12:02 08/28/09 (6)
- RE: Special BIOS and new documentation! - audiofanatic 07:14:25 10/22/11 (4)
- RE: Special BIOS and new documentation! - theob 09:00:32 10/22/11 (3)
- RE: Special BIOS and new documentation! - audiofanatic 09:10:26 10/22/11 (2)
- RE: Special BIOS and new documentation! - theob 10:32:20 10/22/11 (1)
- RE: Special BIOS and new documentation! - audiofanatic 21:45:58 10/22/11 (0)
- NEW DOC IS GREAT!!! - GStew 09:50:40 08/29/09 (0)
- Display Brightness of Zalman HD160XT Plus case - nagual19 00:00:33 08/28/09 (0)
- Adjust brightness using buttons below LCD screen (menu, etc.) - cics 23:15:28 08/28/09 (0)
- Motherboard grounding question - Dawnrazor 18:46:31 08/27/09 (0)
- RE: Motherboard grounding question - GStew 09:40:59 08/29/09 (0)
- RE: Motherboard grounding question - theob 03:39:36 08/28/09 (0)
- RE: Motherboard grounding question - Dawnrazor 09:23:19 08/28/09 (0)
- RE: Motherboard grounding question - theob 17:30:58 08/28/09 (0)
- battery power - play-mate 03:51:44 08/08/09 (0)
- RE: battery power - Bertel 13:20:44 08/19/09 (0)
- current cMP hardware recommendation question - alba63 18:22:49 08/04/09 (0)
- RE: current cMP hardware recommendation question - Dawnrazor 20:49:07 08/04/09 (0)
- RE: current cMP hardware recommendation question - Frodan 20:34:31 08/04/09 (0)
- Questions about EAC and a touch screen monitor - Nikola 13:14:38 08/02/09 (0)
- RE: Questions about EAC and a touch screen monitor - Frodan 16:50:37 08/02/09 (0)
- RE: Questions about EAC and a touch screen monitor - Nikola 03:18:58 08/03/09 (0)
- While booting up I accidentally uninstalled my primary ide channel... - theob 10:56:42 07/22/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - theob 12:41:42 07/28/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - seger 02:24:29 07/29/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - theob 05:17:29 07/29/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - seger 08:30:15 07/29/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - theob 09:32:41 07/29/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - seger 14:29:59 07/29/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - theob 16:35:27 07/29/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - seger 02:46:32 07/30/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - theob 05:00:45 07/30/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - seger 06:46:20 07/30/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - theob 06:55:29 07/30/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - theob 07:19:32 07/30/09 (0)
- I put O Chip Sata mode back to non combined... - theob 07:50:42 07/30/09 (0)
- RE: I put O Chip Sata mode back to non combined... - seger 11:46:18 07/30/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - theob 05:19:48 07/30/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - seger 11:18:24 07/29/09 (0)
- RE: While booting up I accidentally uninstalled my primary ide channel... - Frodan 13:36:34 07/29/09 (0)
- A headless CMP box works great except for one thing... - aljordan 06:40:47 07/20/09 (0)
- Finally built a CMP (of sorts). Long post with some questions. - aljordan 09:01:53 07/19/09 (0)
- RE: Finally built a CMP (of sorts). Long post with some questions. - cics 11:03:14 07/19/09 (0)
- RE: Finally built a CMP (of sorts). Long post with some questions. - theob 10:09:49 07/20/09 (0)
- RE: Finally built a CMP (of sorts). Long post with some questions. - cics 10:39:58 07/21/09 (0)
- RE: Finally built a CMP (of sorts). Long post with some questions. - theob 05:50:05 07/22/09 (0)
- RE: Finally built a CMP (of sorts). Long post with some questions. - aljordan 13:59:51 07/19/09 (0)
- RE: Finally built a CMP (of sorts). Long post with some questions. - cics 07:21:29 07/20/09 (0)
- RE: Finally built a CMP (of sorts). Long post with some questions. - riboge 07:53:26 07/20/09 (0)
- Can you confirm Minlogon implementation steps for SP3 is same for SP2? - cics 08:32:31 07/20/09 (0)
- RE: Can you confirm Minlogon implementation steps for SP3 is same for SP2? - riboge 09:01:15 07/20/09 (0)
- RE: Finally built a CMP (of sorts). Long post with some questions. - riboge 10:13:17 07/19/09 (0)
- RE: Finally built a CMP (of sorts). Long post with some questions. - aljordan 14:29:41 07/19/09 (0)
- RE: Finally built a CMP (of sorts). Long post with some questions. - riboge 15:07:46 07/19/09 (0)
- RE: Finally built a CMP (of sorts). Long post with some questions. - aljordan 15:26:15 07/19/09 (0)
- RE: Finally built a CMP (of sorts). Long post with some questions. - riboge 17:03:19 07/19/09 (0)
- RE: Ive found some decent examples, please tell me... - aljordan 17:57:05 07/19/09 (0)
- RE: Ive found some decent examples, please tell me... - riboge 18:37:47 07/19/09 (0)
- RE: Ive found some decent examples, please tell me... - LxOfIth 12:53:08 01/31/10 (0)
- RE: Ive found some decent examples, please tell me... - aljordan 19:02:48 07/19/09 (0)
- RE: Ive found some decent examples, please tell me... - riboge 20:44:42 07/19/09 (0)
- RE: Finally built a CMP (of sorts). Long post with some questions. - seger 09:36:42 07/19/09 (0)
- RE: Thanks Seger - aljordan 12:12:46 07/19/09 (0)
- RE: Thanks Seger - seger 09:26:29 07/20/09 (0)
- cPlay -alternative to ASIO output ? - play-mate 01:36:45 07/08/09 (0)
- Jack ASIO driver must be used in your x-over setup - cics 08:34:43 07/08/09 (0)
- RE: Jack ASIO driver must be used in your x-over setup - play-mate 16:55:55 07/08/09 (0)
- RE: Jack ASIO driver must be used in your x-over setup - cics 19:12:33 07/08/09 (0)
- I have very good power cord on my cmp2 pc...but... - theob 09:10:52 07/07/09 (0)
- Passive cooling for E7300 - DeDe 08:25:06 07/07/09 (0)
- RE: Passive cooling for E7300 - GStew 11:17:04 07/08/09 (0)
- RE: Passive cooling for E7300 - Frodan 14:24:10 07/07/09 (0)
- RE: Passive cooling for E7300 - nagual19 03:23:32 07/08/09 (0)
- Switched Mode PSU - Mr Underhill 21:35:35 07/06/09 (0)
- read docs, read here. nt - steppe 03:52:05 07/07/09 (0)
- The M Word - Mr Underhill 21:18:12 07/06/09 (0)
- RE: The M Word - cics 17:46:07 07/07/09 (0)
- Current Specs - Mr Underhill 14:07:15 06/29/09 (0)
- RE: Current Specs - cics 11:26:44 06/30/09 (0)
- Thx - Mr Underhill 12:33:40 06/30/09 (0)
- Search functions in cMP (cross posting from cPlay thread) - Frodan 15:23:44 06/24/09 (0)
- Single most beneficial tweak on cmp hardware... - theob 03:08:54 06/24/09 (0)
- Please indications for AMD CPU undervolting - Bibo01 23:12:00 06/21/09 (0)
- RE: Please indications for AMD CPU undervolting - Dawnrazor 14:55:21 06/27/09 (0)
- RE: Please indications for AMD CPU undervolting - Bibo01 01:05:26 07/04/09 (0)
- RE: Please indications for AMD CPU undervolting - theob 05:37:39 06/22/09 (0)
- God is in the details... - GStew 20:54:57 06/20/09 (0)
- Greatness peeking through... - GStew 14:02:52 06/27/09 (0)
- Which capacity batterie for cMP HTPC - hanssatink 06:05:23 06/20/09 (4)
- RE: Which capacity batterie for cMP HTPC - Bertel 11:58:52 06/21/09 (3)
- RE: Which capacity batterie for cMP HTPC - hanssatink 12:24:27 06/21/09 (2)
- RE: Which capacity batterie for cMP HTPC - Bertel 12:58:11 06/21/09 (0)
- RE: Which capacity batterie for cMP HTPC - theob 12:47:08 06/21/09 (0)
- 3rd generation Gigabyte Ultra Durable MoBos - again! - play-mate 08:46:15 06/16/09 (0)
- RE: 3rd generation Gigabyte Ultra Durable MoBos - again! - GStew 10:09:15 06/16/09 (0)
- What are you guys using for memory? - Dawnrazor 20:30:02 06/06/09 (0)
- Thanks everyone, one more question. - Dawnrazor 21:40:05 06/08/09 (0)
- RE: Thanks everyone, one more question. - Ryelands 03:26:09 06/09/09 (0)
- I was not recommending, just reporting - rickmcinnis@dogwoodfabrics.com 08:23:59 06/09/09 (0)
- RE: Thanks everyone, one more question. - seger 03:18:00 06/09/09 (0)
- RE: Thanks everyone, one more question. - abysstw 13:33:39 07/07/09 (0)
- RE: Thanks everyone, one more question. - theob 14:17:35 07/07/09 (0)
- the recommended 256 is no longer available at NEWEGG - rickmcinnis@dogwoodfabrics.com 09:58:34 06/07/09 (0)
- Here is one offer on EBAY - rickmcinnis@dogwoodfabrics.com 10:04:59 06/07/09 (0)
- RE: Here is one offer on EBAY - GStew 10:43:00 06/07/09 (0)
- cMP and HTPC - Bibo01 13:43:27 05/27/09 (0)
- RE: cMP and HTPC - monaco 02:43:08 05/28/09 (0)
- RE: cMP and HTPC - Bibo01 03:06:10 05/28/09 (0)
- RE: cMP and HTPC - cics 02:40:16 05/28/09 (0)
- RE: cMP and HTPC - Bibo01 09:19:55 05/28/09 (0)
- RE: cMP and HTPC - Bibo01 03:17:44 05/28/09 (0)
- RE: cMP and HTPC - flipper 03:42:18 08/24/09 (0)
- cPlay will not launch in cmp mode ! - play-mate 19:21:46 05/24/09 (0)
- Is this only in cMP Mode or also with XP Mode? - cics 09:21:18 05/25/09 (0)
- diagnostics say : - play-mate 16:09:28 05/25/09 (0)
- RE: diagnostics say : - cics 16:56:31 05/25/09 (0)
- both modes - play-mate 14:26:58 05/25/09 (0)
- cMP Error - cktc 00:37:36 05/15/09 (0)
- RE: cMP Error - seger 07:20:35 05/15/09 (0)
- Anybody ever try grounding the GA-G31M-S2L mobo to a wall socket screw? - theob 07:37:41 05/09/09 (0)
- P24 current measurements - Bertel 12:57:52 05/04/09 (0)
- RE: P24 current measurements - GStew 15:02:11 05/04/09 (0)
- RE: P24 current measurements - Bertel 20:16:42 05/04/09 (0)
- Problem: Asus Xonar essence doesn't fit on G31M-ES2L - Apokalypse 09:12:28 05/02/09 (0)
- RE: Problem: Asus Xonar essence doesn't fit on G31M-ES2L - GStew 12:36:55 05/03/09 (0)
- RE: Problem: Asus Xonar essence doesn't fit on G31M-ES2L - Apokalypse 17:23:46 05/03/09 (0)
- RE: Problem: Asus Xonar essence doesn't fit on G31M-ES2L - GStew 06:19:24 05/04/09 (0)
- Any advantages in cd audio extraxction using EAC in CMP optimized computer ? - n_vincent 06:01:58 05/01/09 (0)
- No advantages in cd audio extraxction using EAC in CMP optimized computer ? - Bertel 08:25:03 05/02/09 (0)
- RE: Any advantages in cd audio extraxction using EAC in CMP optimized computer ? - GStew 14:28:17 05/01/09 (0)
- I should add... - GStew 07:10:55 05/02/09 (0)
- RE: Any advantages in cd audio extraxction using EAC in CMP optimized computer ? - riboge 06:21:00 05/01/09 (0)
- I had asked cics about this ... - rickmcinnis@dogwoodfabrics.com 08:06:55 05/01/09 (0)
- Storing music on two internal drives - Kristian 12:22:43 04/28/09 (0)
- RE: Storing music on two internal drives - cics 00:31:30 04/29/09 (0)
- RE: cMP - the open source high-end Memory Player - 57gold 11:59:34 04/25/09 (0)
- Building a cMP - cics 00:35:05 04/29/09 (0)
- RE: Building a cMP - sonis 05:10:51 04/29/09 (0)
- Questions on deeper optimization for the knowledgeable. - steppe 09:23:20 04/25/09 (0)
- Why is there a trojan in cMP? - audiozorro 07:02:23 04/25/09 (0)
- But there IS a Virus - steppe 09:06:05 04/25/09 (0)
- RE: But there IS a Virus - Ryelands 01:17:45 04/26/09 (0)
- RE: Why is there a trojan in cMP? - Ryelands 08:26:19 04/25/09 (0)
- What does the author have to say? - audiozorro 18:11:22 04/25/09 (0)
- RE: What does the author have to say? - Uzeb 21:19:25 04/25/09 (0)
- RE: What does the author have to say? - audiozorro 18:12:09 04/26/09 (0)
- RE: What does the author have to say? - Dawnrazor 13:53:57 04/27/09 (0)
- Got 2.5" drives, fanless configuration and... - theob 06:51:36 04/25/09 (0)
- RE: Got 2.5" drives, fanless configuration and... - steppe 09:35:36 04/25/09 (0)
- RE: Got 2.5" drives, fanless configuration and... - theob 03:43:42 04/26/09 (0)
- Interesting experience with p4 voltage as set on Antec pot - theob 07:16:46 04/21/09 (0)
- RE: cMP - the open source high-end Memory Player - theob 08:36:35 04/20/09 (0)
- RE: cMP - the open source high-end Memory Player - hanssatink 09:47:40 04/20/09 (0)
- RE: cMP - the open source high-end Memory Player - theob 06:28:11 04/21/09 (0)
- RE: cMP - the open source high-end Memory Player - hanssatink 11:32:20 04/21/09 (0)
- RE: cMP - the open source high-end Memory Player - theob 11:49:26 04/21/09 (0)
- RE: cMP - the open source high-end Memory Player - hanssatink 12:04:48 04/21/09 (0)
- RE: cMP - the open source high-end Memory Player - theob 12:43:25 04/21/09 (0)
- Why not one of Giga's new 2-oz. mobos? - Kristian 16:45:52 04/17/09 (0)
- RE: Why not one of Giga's new 2-oz. mobos? - abysstw 01:41:24 04/18/09 (0)
- Has anyone used the stockintel cooler w/o the fan? - theob 16:29:51 04/17/09 (0)
- RE: does cMP sound best with the least amount of memory? - audiogremlin 13:52:11 04/17/09 (0)
- RE: does cMP sound best with the least amount of memory? - cics 07:32:49 04/21/09 (0)
- Can we retest /nopae (i.e. remove it) - cics 17:28:55 04/16/09 (0)
- Great feedback, thanks. /nopae has been removed from recommended settings. - cics 07:28:36 04/21/09 (0)
- RE: Can we retest /nopae (i.e. remove it) - hfavandepas 04:20:46 04/18/09 (0)
- RE: Can we retest /nopae (i.e. remove it) - theob 04:53:44 04/18/09 (0)
- retest of "/nopae" - monaco 02:30:27 04/18/09 (0)
- To nopae or not to nopae - steppe 02:30:02 04/18/09 (0)
- Is it possible to have a bad copy of Windows XP Pro? - theob 03:29:27 04/16/09 (0)
- RE: Is it possible to have a bad copy of Windows XP Pro? - hanssatink 10:09:15 04/16/09 (0)
- RE: Is it possible to have a bad copy of Windows XP Pro? - theob 11:56:38 04/16/09 (0)
- RE: cMP - the open source high-end Memory Player - n_vincent 02:27:58 04/09/09 (0)
- cMP cPLAY and LINUX - n_vincent 02:18:23 04/09/09 (0)
- I think someone is running cPlay in Wine/Linux - cics 08:02:29 04/09/09 (0)
- RE: I think someone is running cPlay in Wine/Linux - n_vincent 13:07:09 04/09/09 (0)
- Which RAM/processor? Also question on external storage? - Apokalypse 15:31:41 04/08/09 (0)
- Any E7xxx Processor will do. On RAM, use single stick at CL3/4 1.8V (256MB for 44.1k material else 512MB) - cics 08:10:29 04/09/09 (0)
- The good, bad, and ugly: reporting back to seger, Ryelands, cics, and Dawnrazor . . . - DBB 17:00:04 04/06/09 (0)
- RE: The good, bad, and ugly: reporting back to seger, Ryelands, cics, and Dawnrazor . . . - Ryelands 03:56:29 04/07/09 (0)
- RE: The good, bad, and ugly: reporting back to seger, Ryelands, cics, and Dawnrazor . . . - DBB 04:41:29 04/07/09 (0)
- RE: The good, bad, and ugly: reporting back to seger, Ryelands, cics, and Dawnrazor . . . - Dawnrazor 09:24:17 04/10/09 (0)
- RE: The good, bad, and ugly: reporting back to seger, Ryelands, cics, and Dawnrazor . . . - DBB 05:50:20 04/13/09 (0)
- RE: The good, bad, and ugly: reporting back to seger, Ryelands, cics, and Dawnrazor . . . - Bibo01 00:52:40 04/14/09 (0)
- RE: The good, bad, and ugly: reporting back to seger, Ryelands, cics, and Dawnrazor . . . - DBB 06:48:32 04/15/09 (0)
- RE: The good, bad, and ugly: reporting back to seger, Ryelands, cics, and Dawnrazor . . . - Dawnrazor 11:49:06 04/13/09 (0)
- RE: The good, bad, and ugly: reporting back to seger, Ryelands, cics, and Dawnrazor . . . - seger 06:53:03 04/13/09 (0)
- RE: The good, bad, and ugly: reporting back to seger, Ryelands, cics, and Dawnrazor . . . - DBB 10:02:37 04/13/09 (0)
- RE: The good, bad, and ugly: reporting back to seger, Ryelands, cics, and Dawnrazor . . . - seger 12:31:48 04/13/09 (0)
- Give cPlay a try - you can simply play the actual wav or flac file directly - cics 22:28:42 04/06/09 (0)
- Current measurements on powersupply P4 pin - hfavandepas 09:19:02 04/06/09 (0)
- RE: Current measurements on powersupply P4 pin - Ryelands 12:25:52 04/06/09 (0)
- What VID are you using to get Vcore of 0.75V (and host @140)? Noticed that with EIST off, VID can go lower! nt - cics 23:11:59 04/07/09 (0)
- RE: What VID are you using to get Vcore of 0.75V (and host @140)? Noticed that with EIST off, VID can go lower! nt - Ryelands 01:02:25 04/08/09 (0)
- RE: What VID are you using to get Vcore of 0.75V (and host @140)? Noticed that with EIST off, VID can go lower! nt - cics 10:30:00 04/08/09 (0)
- RE: What VID are you using to get Vcore of 0.75V (and host @140)? Noticed that with EIST off, VID can go lower! nt - Ryelands 04:15:32 04/09/09 (0)
- RE: What VID are you using to get Vcore of 0.75V (and host @140)? Noticed that with EIST off, VID can go lower! nt - cics 07:57:55 04/09/09 (0)
- RE: Current measurements on powersupply P4 pin - hfavandepas 09:07:24 04/07/09 (0)
- RE: Current measurements on powersupply P4 pin - Ryelands 10:53:54 04/07/09 (0)
- let's skip this discussion. This is going nowhere. RE: Current measurements on powersupply P4 pin - hfavandepas 13:28:59 04/07/09 (0)
- RE: let's skip this discussion. This is going nowhere. RE: Current measurements on powersupply P4 pin - Ryelands 15:28:12 04/07/09 (0)
- case closed - hfavandepas 16:48:05 04/07/09 (0)
- RE: Current measurements on powersupply P4 pin - theob 12:10:23 04/06/09 (0)
- if you can, get rid of the processor fan. :-) RE: Current measurements on powersupply P4 pin - hfavandepas 15:48:02 04/06/09 (0)
- RE: what am i doing wrong with cMP and Foobar? - audiogremlin 18:47:40 04/03/09 (0)
- RE: what am i doing wrong with cMP and Foobar? - Dawnrazor 22:01:06 04/03/09 (0)
- RE: what am i doing wrong with cMP and Foobar? - audiogremlin 12:13:28 04/04/09 (0)
- Got cPlay to play 192 via firewire with Asio4All but not cMP2 - riboge 11:55:56 04/03/09 (0)
- Solved - riboge 11:20:08 04/09/09 (0)
- Help! cMP2 setup blocks Weiss asio - riboge 13:59:27 04/08/09 (0)
- RE: how to use foobar with cMP - audiogremlin 09:00:01 04/03/09 (0)
- RE: how to use foobar with cMP - Ryelands 09:14:16 04/03/09 (0)
- RE: how to use foobar with cMP - audiogremlin 09:56:49 04/03/09 (0)
- RE: how to use foobar with cMP - Ryelands 10:06:11 04/03/09 (0)
- RE: how to use foobar with cMP - audiogremlin 12:59:24 04/03/09 (0)
- Cics: hate to be a pia on my issue but... - theob 12:12:10 04/01/09 (17)
- RE: Cics: hate to be a pia on my issue but... - mschneider 14:31:36 04/07/09 (0)
- RE: Cics: hate to be a pia on my issue but... - theob 16:24:08 04/07/09 (0)
- If you can now be sure it is not the DAC ... - rickmcinnis@dogwoodfabrics.com 09:31:13 04/03/09 (0)
- RE: If you can now be sure it is not the DAC ... - theob 11:55:39 04/03/09 (0)
- A mystery unless ... - rickmcinnis@dogwoodfabrics.com 12:18:02 04/03/09 (0)
- RE: A mystery unless ... - theob 12:49:06 04/03/09 (0)
- Rick and Cics: more data on my issue - theob 10:10:46 04/04/09 (0)
- Why obsess on the processor? - rickmcinnis@dogwoodfabrics.com 14:30:31 04/04/09 (0)
- ok I've got a new mobo installed - theob 13:42:22 04/09/09 (0)
- Failed again although new mobo sounds alot better - theob 03:13:06 04/10/09 (0)
- RE: Why obsess on the processor? - theob 15:40:59 04/04/09 (0)
- I would 2nd that - cics 10:19:15 04/03/09 (0)
- RE: I would 2nd that - theob 10:41:51 04/03/09 (0)
- RE: Cics: hate to be a pia on my issue but... - GStew 20:04:28 04/01/09 (7)
- RE: Cics: hate to be a pia on my issue but... - theob 03:15:56 04/02/09 (6)
- RE: Cics: hate to be a pia on my issue but... - theob 06:49:25 04/02/09 (5)
- RE: Cics: hate to be a pia on my issue but... - theob 06:55:47 04/02/09 (4)
- RE: Cics: hate to be a pia on my issue but... - theob 07:01:00 04/02/09 (3)
- RE: Cics: hate to be a pia on my issue but... - theob 07:07:12 04/02/09 (2)
- RE: Cics: hate to be a pia on my issue but... - Dawnrazor 11:12:49 04/04/09 (1)
- testing pic posting - Dr.Jazz 17:12:49 04/05/09 (0)
- RE: Cics: hate to be a pia on my issue but... - theob 11:18:56 04/04/09 (0)
- Installed new hdd, reinstalled old one on which I have ... - theob 06:02:19 04/01/09 (0)
- add /nopae to boot.ini. Somehow I missed this one. - hfavandepas 03:57:34 04/01/09 (18)
- Definitely keep the /nopae option - cics 10:25:56 04/03/09 (0)
- Going to retest "/nopae" - cics 11:31:50 04/01/09 (0)
- RE: Going to retest "/nopae" - hfavandepas 12:44:31 04/01/09 (0)
- RE: Going to retest "/nopae" - monaco 03:10:22 04/02/09 (0)
- Thankx for trying and feedback Hope others wil try to. RE: Going to retest "/nopae" - hfavandepas 04:23:18 04/02/09 (0)
- RE: add /nopae to boot.ini. Somehow I missed this one. - theob 04:21:11 04/01/09 (13)
- better or worse SQ ? RE: add /nopae to boot.ini. Somehow I missed this one. - hfavandepas 04:50:18 04/01/09 (12)
- Please state conditions for using nopae - riboge 12:11:35 04/01/09 (9)
- RE: Please state conditions for using nopae - hfavandepas 12:56:53 04/01/09 (8)
- RE: Please state conditions for using nopae - riboge 16:07:27 04/01/09 (7)
- why not just try it ? RE: Please state conditions for using nopae - hfavandepas 03:57:10 04/02/09 (6)
- WATCH OUT for typo in parameter string... - gjwAudio 20:51:24 04/02/09 (0)
- Microsoft helpfiles are confusing too. So keep try-ing - hfavandepas 02:55:10 04/03/09 (0)
- sh..... The typo (/nopea) was in my boot.ini ! Confusion complete - hfavandepas 00:40:21 04/03/09 (0)
- Correct parameter makes POSITIVE Difference... - gjwAudio 11:31:11 04/03/09 (0)
- RE: why not just try it ? RE: Please state conditions for using nopae - clare t 12:55:59 04/02/09 (1)
- Cics brought it up. Thankx for trying /nopae and your feedback ! - hfavandepas 13:35:19 04/02/09 (0)
- I meant thanks for bringing it to our attention, I wasn't even aware of its existence in the thread! nt. - clare t 13:42:19 04/02/09 (0)
- Your edit seems to be a caveat - riboge 09:55:59 04/02/09 (0)
- RE: Your edit seems to be a caveat - hfavandepas 10:24:47 04/02/09 (0)
- RE: Your edit seems to be a caveat - riboge 12:14:37 04/02/09 (0)
- :-) No problem. At least you tried /nopae ! - hfavandepas 12:30:27 04/02/09 (0)
- RE: better or worse SQ ? RE: add /nopae to boot.ini. Somehow I missed this one. - theob 05:48:49 04/01/09 (0)
- Hope others wil try it too ! RE: add /nopae to boot.ini. Somehow I missed this one. - hfavandepas 06:01:34 04/01/09 (0)
- Is a dual boot system for both for both cMP and Vista possible? - DBB 08:44:40 03/30/09 (0)
- Thanks to seger, Ryelands, and cics . . . - DBB 14:48:05 03/31/09 (0)
- RE: Thanks to seger, Ryelands, and cics . . . - seger 04:05:57 04/02/09 (0)
- Cics is right - Dawnrazor 11:53:08 04/01/09 (0)
- From the screen shot, you can improve SQ significantly! - cics 11:41:25 04/01/09 (0)
- RE: Is a dual boot system for both for both cMP and Vista possible? - seger 14:59:44 03/30/09 (0)
- RE: Is a dual boot system for both for both cMP and Vista possible? - DBB 03:31:27 03/31/09 (0)
- something else... - seger 11:00:06 03/31/09 (0)
- RE: Is a dual boot system for both for both cMP and Vista possible? - seger 07:53:47 03/31/09 (0)
- RE: Is a dual boot system for both for both cMP and Vista possible? - cics 11:02:46 03/30/09 (0)
- RE: Is a dual boot system for both for both cMP and Vista possible? - DBB 03:44:21 03/31/09 (0)
- RE: Is a dual boot system for both for both cMP and Vista possible? - Ryelands 04:51:30 03/31/09 (0)
- RE: Is a dual boot system for both for both cMP and Vista possible? - DBB 06:00:35 03/31/09 (0)
- RE: Is a dual boot system for both for both cMP and Vista possible? - Ryelands 07:02:44 03/31/09 (0)
- RE: Is a dual boot system for both for both cMP and Vista possible? - Ryelands 12:38:33 03/30/09 (0)
- Source of Artist in cMP display. - sondale 17:16:23 03/28/09 (0)
- Artist = PERFORMER as in header and not in TRACK details. nt - cics 10:35:53 03/29/09 (0)
- RE: Artist = PERFORMER as in header and not in TRACK details. nt - sondale 01:59:52 03/30/09 (0)
- Juli@ PSU highlights - sonics 07:34:56 03/28/09 (26)
- RE: Juli@ PSU highlights - acvtre@gmail.com 02:01:13 12/28/11 (0)
- RE: Juli@ PSU highlights - rickchan.bw@gmail.com 13:38:16 10/10/09 (0)
- RE: Juli@ PSU highlights - GStew 20:10:23 04/11/09 (0)
- RE: Juli@ PSU highlights - clare t 11:41:28 04/02/09 (0)
- RE: Juli@ PSU highlights - theob 07:32:47 04/01/09 (0)
- RE: Juli@ PSU highlights - sonics 08:23:05 04/01/09 (0)
- RE: Juli@ PSU highlights - theob 08:31:51 04/01/09 (0)
- RE: Juli@ PSU highlights - sonics 08:38:47 04/01/09 (0)
- RE: Juli@ PSU highlights - theob 08:52:51 04/01/09 (0)
- RE: Juli@ PSU highlights - GStew 07:13:03 03/29/09 (0)
- How about a different approach: replace Juli@'s analogue PCB - cics 11:27:57 03/29/09 (0)
- RE: How about a different approach: replace Juli@'s analogue PCB - GStew 20:18:25 03/31/09 (0)
- RE: How about a different approach: replace Juli@'s analogue PCB - Bertel 22:54:45 03/31/09 (0)
- RE: How about a different approach: replace Juli@'s analogue PCB - GStew 18:27:10 04/01/09 (0)
- Key is to keep Juli@'s digital section that way we keep the excellent ASIO drivers - cics 08:07:07 04/02/09 (0)
- RE: Key is to keep Juli@'s digital section that way we keep the excellent ASIO drivers - Bertel 05:17:23 04/03/09 (0)
- Need to confirm 32 bit I2S interface and ability to disable filter - cics 10:28:54 04/03/09 (0)
- 32 bit - Bertel 14:50:46 04/04/09 (0)
- cPlay outputs all audio at 32 bit resolution, giving 32/192k etc. Soundcard drops lower bits. nt - cics 23:17:32 04/04/09 (0)
- RE: Need to confirm 32 bit I2S interface and ability to disable filter - Bertel 10:47:23 04/03/09 (0)
- RE: How about a different approach: replace Juli@'s analogue PCB - sonics 14:32:09 03/29/09 (0)
- RE: How about a different approach: replace Juli@'s analogue PCB - cics 08:33:00 03/30/09 (0)
- RE: How about a different approach: replace Juli@'s analogue PCB - sonics 09:40:50 03/30/09 (0)
- RE: How about a different approach: replace Juli@'s analogue PCB - GStew 11:44:29 03/29/09 (0)
- thanks for letting me know about email problem - am trying to fix it. nt - cics 10:56:12 03/30/09 (0)
- RE: How about a different approach: replace Juli@'s analogue PCB - GStew 11:41:18 03/29/09 (0)
- Changing drive letters so cues work - Dawnrazor 13:04:28 03/27/09 (0)
- Solved it kind of - Dawnrazor 15:23:57 03/28/09 (0)
- IS THIS THE PROBLEM? - Dawnrazor 21:08:36 03/27/09 (0)
- RE: Changing drive letters so cues work - seger 14:44:36 03/27/09 (0)
- RE: Changing drive letters so cues work - Dawnrazor 15:30:03 03/27/09 (0)
- RE: Changing drive letters so cues work - seger 16:43:28 03/27/09 (0)
- RE: Changing drive letters so cues work - Dawnrazor 19:17:20 03/27/09 (0)
- RE: Changing drive letters so cues work - seger 16:27:47 03/27/09 (0)
- Closer - Dawnrazor 17:11:25 03/27/09 (0)
- RE: Closer - mschneider 14:56:55 04/09/09 (0)
- RE: Closer - Dawnrazor 21:53:51 04/09/09 (0)
- RE: Closer - seger 02:24:29 03/28/09 (0)
- RE: Closer - Dawnrazor 21:50:18 04/09/09 (0)
- RE: Closer - seger 03:11:28 04/10/09 (0)
- RE: Closer - Dawnrazor 19:54:14 04/10/09 (0)
- External 24 BIT/192KHz DAC - sozeh 20:28:49 03/25/09 (1)
- RE: External 24 BIT/192KHz DAC - Gaston 14:41:28 09/11/12 (6)
- RE: External 24 BIT/192KHz DAC - Bibo01 16:56:00 09/11/12 (5)
- RE: External 24 BIT/192KHz DAC - Gaston 02:03:00 02/06/13 (4)
- RE: External 24 BIT/192KHz DAC - theob 07:23:01 02/06/13 (3)
- RE: External 24 BIT/192KHz DAC - Gaston 03:45:08 02/07/13 (2)
- RE: External 24 BIT/192KHz DAC - theob 03:54:26 02/07/13 (1)
- RE: External 24 BIT/192KHz DAC - Gaston 00:12:48 02/12/13 (0)
- Minlogon: Segers method help - Dawnrazor 12:28:59 03/25/09 (0)
- P.S. - seger 13:15:48 03/25/09 (0)
- RE: P.S. - Dawnrazor 17:37:04 03/25/09 (0)
- RE: P.S. - seger 02:34:26 03/26/09 (0)
- How to edit registry to access disk manager - riboge 13:45:19 03/25/09 (0)
- Fixed! )new question resulting - riboge 09:53:50 03/26/09 (0)
- RE: Fixed! )new question resulting - riboge 08:10:58 03/27/09 (0)
- RE: Fixed! )new question resulting - seger 03:41:08 03/27/09 (0)
- RE: Fixed! )new question resulting - theob 10:18:28 03/26/09 (0)
- RE: Fixed! )new question resulting - riboge 10:38:25 03/26/09 (0)
- RE: How to edit registry to access disk manager - seger 14:27:30 03/25/09 (0)
- RE: How to edit registry to access disk manager - riboge 14:37:44 03/25/09 (0)
- RE: How to edit registry to access disk manager - seger 14:54:41 03/25/09 (0)
- RE: How to edit registry to access disk manager - riboge 15:16:20 03/25/09 (0)
- RE: How to edit registry to access disk manager - seger 15:40:05 03/25/09 (0)
- RE: How to edit registry to access disk manager - riboge 16:05:14 03/25/09 (0)
- RE: How to edit registry to access disk manager - seger 02:38:26 03/26/09 (0)
- RE: How to edit registry to access disk manager - theob 14:01:14 03/25/09 (0)
- RE: Minlogon: Segers method help - seger 13:00:14 03/25/09 (0)
- Great post; I'll bookmark this for later potential use. nt - theob 02:36:41 03/26/09 (0)
- THANKS!!! That was it - Dawnrazor 13:40:34 03/25/09 (0)
- RE: THANKS!!! That was it - seger 14:04:16 03/25/09 (0)
- RE: THANKS!!! That was it - Dawnrazor 15:00:53 03/25/09 (0)
- RE: THANKS!!! That was it - seger 15:08:41 03/25/09 (0)
- What happened to the documentation? - Apokalypse 03:47:22 03/25/09 (0)
- RE: What happened to the documentation? - Bertel 04:25:05 03/25/09 (0)
- Make sure to hit Next for "Installation Guide & User Manual" as well (18 pages). nt - cics 06:47:24 03/25/09 (0)
- RE: Make sure to hit Next for "Installation Guide & User Manual" as well (18 pages). nt - Apokalypse 14:43:22 03/25/09 (0)
- Juli@ Follies... - GStew 20:44:55 03/24/09 (12)
- RE: Juli@ Follies... - Jolida 06:44:29 07/31/11 (0)
- Late-breaking news... - GStew 16:55:18 05/11/09 (0)
- Direct-Connect BNC Mod.. - GStew 18:11:28 05/13/09 (0)
- Great work! - abysstw 23:38:36 05/11/09 (0)
- RE: Great work! - GStew 06:41:39 05/12/09 (0)
- Input and Output capacitor sizes - abysstw 22:51:39 05/12/09 (0)
- RE: Input and Output capacitor sizes - GStew 08:37:15 05/13/09 (0)
- RE: Input and Output capacitor sizes - abysstw 09:41:17 05/13/09 (0)
- RE: Great work! - abysstw 08:13:55 05/12/09 (0)
- RE: Great work! - GStew 08:20:40 05/12/09 (0)
- Really? - abysstw 09:37:22 05/12/09 (0)
- haven't tried RAMDisk, waiting for SSD prices to fall (NT) - GStew 07:54:22 05/13/09 (0)
- I use an SSD (too used to typing HDD). Even so, placing cPlay in RAMDisk seems to subtley improve SQ. nt. - abysstw 08:12:32 05/13/09 (0)
- RE: Juli@ Follies... the epilogue - GStew 20:27:56 05/01/09 (0)
- Not yet, mister ;) - abysstw 02:10:07 05/09/09 (0)
- Sorry, took them last weekend, but haven't had the time to post them... - GStew 06:51:57 05/09/09 (0)
- Crowded, yet beautiful in a disorderly way. But... - abysstw 08:37:30 05/09/09 (0)
- RE: Crowded, yet beautiful in a disorderly way. But... - GStew 13:40:36 05/09/09 (0)
- RE: Juli@ Follies... the epilogue - Dawnrazor 23:12:01 05/01/09 (0)
- Good point, DR - GStew 07:07:20 05/02/09 (0)
- RE: Juli@ Follies... - GStew 23:30:02 04/25/09 (0)
- RE: Juli@ Follies... - GStew 08:48:09 04/26/09 (0)
- RE: Juli@ Follies... - sonics 13:59:54 04/26/09 (0)
- RE: Juli@ Follies... - GStew 15:44:49 04/26/09 (0)
- RE: Juli@ Follies... - GStew 20:57:49 04/11/09 (0)
- RE: Juli@ Follies... - GStew 13:10:20 04/06/09 (0)
- RE: Juli@ Follies... - GStew 18:13:18 04/01/09 (0)
- RE: Juli@ Follies... - GStew 07:35:09 03/29/09 (0)
- RE: Juli@ Follies... - theob 08:24:44 03/29/09 (0)
- RE: Juli@ Follies... - GStew 08:42:46 03/29/09 (0)
- RE: Juli@ Follies... - Kaedrin 08:18:40 03/29/09 (0)
- RE: Juli@ Follies... - GStew 09:45:18 03/29/09 (0)
- Summary of Juli@ mods - cics 22:06:40 03/24/09 (0)
- RE: Summary of Juli@ mods - GStew 06:10:01 03/25/09 (0)
- RE: Summary of Juli@ mods - theob 06:13:01 03/25/09 (0)
- RE: Summary of Juli@ mods - GStew 06:50:43 03/25/09 (0)
- Revenge of the Power Supply Follies... - GStew 19:09:07 03/24/09 (0)
- All supply is now Linear except for Pico PSU - cics 20:20:24 03/27/09 (0)
- RE: All supply is now Linear except for Pico PSU - GStew 12:36:06 03/28/09 (0)
- RE: Revenge of the Power Supply Follies... - Bertel 01:18:49 03/25/09 (0)
- RE: Revenge of the Power Supply Follies... - GStew 06:23:50 03/25/09 (0)
- RE: Revenge of the Power Supply Follies... - Bertel 06:47:15 03/25/09 (0)
- My metallic overlay is still with me after new hdd - theob 08:36:27 03/17/09 (70)
- You must remove the old HDD (and unfortunately this means a new Windows install) - cics 16:02:28 03/17/09 (69)
- Finally reloaded Windows - theob 18:31:13 03/20/09 (12)
- Min Avail RAM must be at least 160MB - try stopping services to free up RAM. nt - cics 02:34:42 03/21/09 (11)
- Not Enough Ram Error - etiennelemay@gmail.com 13:56:10 07/03/09 (9)
- RE: Not Enough Ram Error - GStew 09:05:45 07/04/09 (0)
- Not Enough Ram Error (Update) - etiennelemay@gmail.com 09:00:44 07/04/09 (0)
- RE: Not Enough Ram Error (Update) - GStew 09:12:38 07/04/09 (0)
- RE: Not Enough Ram Error (Update) - GStew 09:32:43 07/04/09 (0)
- RE: Not Enough Ram Error (Update) - etiennelemay@gmail.com 09:50:35 07/04/09 (0)
- RE: Not Enough Ram Error (Update) - GStew 09:56:30 07/04/09 (0)
- RE: Not Enough Ram Error (Update) - GStew 13:05:42 07/04/09 (0)
- RE: Not Enough Ram Error (Update) - etiennelemay 21:32:03 07/04/09 (0)
- RE: Not Enough Ram Error - GStew 16:54:44 07/03/09 (0)
- RE: Not Enough Ram Error - etiennelemay@gmail.com 21:36:50 07/03/09 (0)
- RE: Not Enough Ram Error - etiennelemay@gmail.com 21:42:03 07/03/09 (0)
- RE: Not Enough Ram Error - Dawnrazor 16:54:18 07/03/09 (0)
- RE: Not Enough Ram Error - theob 16:48:45 07/03/09 (0)
- RE: Min Avail RAM must be at least 160MB - try stopping services to free up RAM. nt - theob 03:19:49 03/21/09 (0)
- Calling all computer experts (aka ryelands and seger) - theob 16:28:07 03/18/09 (19)
- RE: Calling all computer experts (aka ryelands and seger) - Ryelands 04:28:38 03/21/09 (18)
- Metallic overlay still with me, yikes - theob 05:03:10 03/21/09 (17)
- RE: Metallic overlay still with me, yikes - Ryelands 05:51:06 03/21/09 (16)
- RE: Metallic overlay still with me, yikes - theob 06:02:20 03/21/09 (15)
- RE: Metallic overlay still with me, yikes - Ryelands 06:18:56 03/21/09 (14)
- Can't do this Dave, I would need asio4all which only does 96 src - theob 07:19:57 03/21/09 (12)
- Could you test with another DAC? - cics 11:38:56 03/21/09 (8)
- RE: Could you test with another DAC? - theob 12:33:09 03/21/09 (7)
- Just test using headphones connected to Juli@'s analogue outs - cics 00:55:38 03/22/09 (6)
- I set it up and ran.... - theob 04:25:44 03/22/09 (4)
- In cPlay, select Julia@'s analogue outputs (be careful with volume). nt - cics 05:18:49 03/22/09 (3)
- RE: In cPlay, select Julia@'s analogue outputs (be careful with volume). nt - theob 05:25:03 03/22/09 (2)
- RE: In cPlay, select Julia@'s analogue outputs (be careful with volume). nt - theob 06:26:04 03/22/09 (1)
- 2 hours--no problem, will check every hour now... - theob 07:26:17 03/22/09 (0)
- ok 7 hours--no problem, - theob 13:47:20 03/22/09 (0)
- RE: ok 7 hours--no problem, - theob 14:10:06 03/22/09 (0)
- Possible explanations for my 'metallic issue' - theob 03:15:23 03/23/09 (0)
- Answer is option 1 (DAC1 is causing this at 192k input and not 96k or lower) - cics 10:36:15 03/23/09 (0)
- I'm very interested in comparing DAC1 to Juli@'s analogue outputs - cics 18:01:34 03/23/09 (0)
- Listening to juli@'s analogue outputs - theob 13:59:58 03/25/09 (0)
- RE: I'm very interested in comparing DAC1 to Juli@'s analogue outputs - theob 02:34:32 03/24/09 (0)
- Contacted Benchmark Media very good folks(like Elias Gwinn) - theob 07:15:38 03/24/09 (0)
- Running 5 consecutive hours no problem - theob 11:49:44 03/24/09 (0)
- Try this test - cics 15:43:17 03/24/09 (0)
- RE: Try this test - theob 17:58:05 03/24/09 (0)
- update on testing - theob 04:27:08 03/25/09 (0)
- RE: update on testing 2 - theob 06:33:12 03/25/09 (0)
- That's a similar test - looks like spdif out of Juli@ is causing this - cics 06:43:55 03/25/09 (0)
- RE: That's a similar test - looks like spdif out of Juli@ is causing this - theob 02:52:56 03/26/09 (0)
- RE: That's a similar test - looks like spdif out of Juli@ is causing this - cics 20:14:09 03/27/09 (0)
- RE: That's a similar test - looks like spdif out of Juli@ is causing this - theob 03:09:35 03/28/09 (0)
- Re-test with Main PSU powering HDD - cics 03:49:17 03/28/09 (0)
- RE: Re-test with Main PSU powering HDD - theob 03:57:27 03/28/09 (0)
- OK Re-testing with Main PSU powering HDD - theob 04:23:15 03/28/09 (0)
- 36 minutes I got the metallics. nt - theob 04:57:27 03/28/09 (0)
- Further observations/data on this issue - theob 06:40:46 03/28/09 (0)
- More feedback on juli@ analogue out - theob 08:16:35 03/28/09 (0)
- More feedback on juli@ analogue out - theob 04:17:09 03/29/09 (0)
- RE: More feedback on juli@ analogue out - cics 10:42:28 03/29/09 (0)
- RE: More feedback on juli@ analogue out - theob 12:43:52 03/29/09 (0)
- Hooked dac1 back up - theob 07:07:31 03/30/09 (0)
- Listerning to juli@ analogue outs - theob 08:24:52 03/31/09 (0)
- RE: Listerning to juli@ analogue outs..back to hcc @ 150 - theob 06:28:49 04/01/09 (0)
- hate to be a pia to you cics but... - theob 11:46:33 04/01/09 (0)
- RE: hate to be a pia to you cics but... - ulder 13:57:19 04/12/11 (0)
- Thank you so much for your help in diagnosing this issue - theob 12:23:51 03/23/09 (0)
- I was hoping this was not the case. - theob 11:21:06 03/23/09 (0)
- RE: I was hoping this was not the case. - RayBan 13:39:57 03/23/09 (0)
- What 192 capable dacs are others using with cplay? - theob 12:16:13 03/23/09 (0)
- RE: What 192 capable dacs are others using with cplay? - sondale 14:28:42 03/23/09 (0)
- RE: What 192 capable dacs are others using with cplay? - theob 14:59:01 03/23/09 (0)
- RE: Just test using headphones connected to Juli@'s analogue outs - theob 03:51:59 03/22/09 (0)
- RE: Can't do this Dave, I would need asio4all which only does 96 src - sondale 07:36:50 03/21/09 (0)
- RE: Can't do this Dave, I would need asio4all which only does 96 src - theob 08:05:42 03/21/09 (0)
- RE: Can't do this Dave, I would need asio4all which only does 96 src - sondale 10:35:07 03/21/09 (0)
- RE: Metallic overlay still with me, yikes - theob 06:25:24 03/21/09 (0)
- RE: cMP - the open source high-end Memory Player - tsearay 11:29:37 03/16/09 (0)
- RE: cMP - the open source high-end Memory Player - seger 12:37:17 03/16/09 (0)
- RE: cMP - the open source high-end Memory Player - tsearay 17:57:40 03/16/09 (0)
- RE: cMP - the open source high-end Memory Player - seger 04:38:19 03/17/09 (0)
- RE: cMP - the open source high-end Memory Player - tsearay 08:27:40 03/17/09 (0)
- RE: cMP - the open source high-end Memory Player - seger 10:17:47 03/17/09 (0)
- RE: cMP - the open source high-end Memory Player - tsearay 11:59:12 03/17/09 (0)
- RE: cMP - the open source high-end Memory Player - tsearay 13:32:55 03/17/09 (0)
- RE: cMP - the open source high-end Memory Player - seger 11:11:31 03/19/09 (0)
- I need to enable something in bios to set up and format a new hdd... - theob 11:16:17 03/16/09 (0)
- RE: I need to enable something in bios to set up and format a new hdd... - GStew 13:32:23 03/16/09 (0)
- RE: I need to enable something in bios to set up and format a new hdd... - RayBan 15:07:42 03/16/09 (0)
- RE: I need to enable something in bios to set up and format a new hdd... - theob 16:19:32 03/16/09 (0)
- RE: I need to enable something in bios to set up and format a new hdd... - Ryelands 13:58:53 03/16/09 (0)
- RE: I need to enable something in bios to set up and format a new hdd... - riboge 14:25:01 03/16/09 (0)
- RE: I need to enable something in bios to set up and format a new hdd... - theob 14:20:17 03/16/09 (0)
- RE: I need to enable something in bios to set up and format a new hdd... - seger 14:11:04 03/16/09 (0)
- RE: I need to enable something in bios to set up and format a new hdd... - theob 14:25:45 03/16/09 (0)
- RE: I need to enable something in bios to set up and format a new hdd... - theob 16:20:49 03/16/09 (0)
- Need feedback on this experimental setup for cMP² - cics 09:50:55 03/16/09 (28)
- RE: Need feedback on this experimental setup for cMP² - GStew 18:56:39 03/24/09 (0)
- RE: Need feedback on this experimental setup for cMP² - GStew 11:12:26 03/25/09 (0)
- Test on GTLREF voltage ratios is useful - cics 07:05:14 03/25/09 (0)
- RE: Test on GTLREF voltage ratios is useful - GStew 08:30:52 03/25/09 (0)
- E7xxx processor all have same basic specifications (3MB Cache, Dual Core, VIDs, FSB) but different frequency - cics 09:39:51 03/25/09 (0)
- RE: E7xxx processor all have same basic specifications (3MB Cache, Dual Core, VIDs, FSB) but different frequency - GStew 10:14:42 03/25/09 (0)
- Additional USB Device Manager setup / optimisation - cics 16:22:06 03/17/09 (4)
- Two more devices to disable - cics 02:38:36 03/21/09 (3)
- RE: Two more devices to disable - Ryelands 04:40:21 03/22/09 (2)
- RE: Two more devices to disable - seger 03:21:28 03/26/09 (0)
- RE: Two more devices to disable - Ryelands 04:36:45 03/26/09 (0)
- RE: Two more devices to disable - seger 09:36:59 03/26/09 (0)
- RE: Two more devices to disable - cics 10:46:46 03/23/09 (1)
- RE: Two more devices to disable - cics 06:59:49 03/25/09 (0)
- RE: Need feedback on this experimental setup for cMP² - Ryelands 06:58:16 03/17/09 (0)
- Power consumption of 21.6w was expected - range of 21-24 is excellent! nt - cics 16:05:20 03/17/09 (0)
- RE: Need feedback on this experimental setup for cMP² - telrab 06:47:14 03/17/09 (0)
- @bertel & telrab: Do you get improvement with additional Device Manager changes? - cics 01:03:43 03/22/09 (0)
- RE: @bertel & telrab: Do you get improvement with additional Device Manager changes? - telrab 03:18:11 03/25/09 (0)
- RE: @bertel & telrab: Do you get improvement with additional Device Manager changes? - Bertel 15:11:01 03/22/09 (0)
- RE: @bertel & telrab: Do you get improvement with additional Device Manager changes? - Ryelands 06:35:17 03/23/09 (0)
- Changes to System Devices, Registry - Bertel 06:54:02 03/23/09 (0)
- Do not disable the 3rd "Motherboard resources" device which is for PCI bus - cics 10:27:59 03/23/09 (0)
- RE: Do not disable the 3rd "Motherboard resources" device which is for PCI bus - Bertel 11:04:50 03/23/09 (0)
- Works great - Bertel 04:46:58 03/17/09 (0)
- RE: Need feedback on this experimental setup for cMP² - theob 16:43:37 03/16/09 (0)
- RE: Need feedback on this experimental setup for cMP² - cics 17:26:58 03/16/09 (0)
- RE: Need feedback on this experimental setup for cMP² - theob 11:46:12 03/17/09 (0)
- With EIST disabled, there's much better low CPU voltage stability - cics 16:14:13 03/17/09 (0)
- RE: With EIST disabled, there's much better low CPU voltage stability - theob 09:18:38 03/21/09 (0)
- RE: With EIST disabled, there's much better low CPU voltage stability - Bertel 00:24:41 03/18/09 (0)
- New GIGABYTE motherboard G31M-ES2L - n_vincent 01:12:56 03/15/09 (0)
- Recommended G31M-S2L is no longer available. Rather use GA-G31M-S2C (which should offer same BIOS settings) - cics 04:17:38 03/15/09 (0)
- Granite PS for USB + LCD + SSD - dtrange behaviour... - Bertel 01:11:58 03/08/09 (0)
- I suspect its a power supply issue where load is too insignificant (only a mouse!) thus causing problems - cics 09:39:43 03/08/09 (0)
- RE: I suspect its a power supply issue where load is too insignificant (only a mouse!) thus causing problems - Bertel 09:47:53 03/08/09 (0)
- LCD puts load on 12V line only leaving 5V to idle. SSD puts load on 5V line. nt - cics 10:37:32 03/08/09 (0)
- RE: LCD puts load on 12V line only leaving 5V to idle. SSD puts load on 5V line. nt - Bertel 10:46:19 03/08/09 (0)
- RE: LCD puts load on 12V line only leaving 5V to idle. SSD puts load on 5V line. nt - Bertel 11:23:46 03/08/09 (0)
- SSD vs HDD - cics 23:03:51 03/06/09 (5)
- RE: SSD vs HDD - theob 02:13:19 03/07/09 (4)
- Using a small SSD drive - cics 11:34:03 03/07/09 (1)
- RE: Using a small SSD drive - theob 12:03:48 03/07/09 (0)
- Cics a few more questions - theob 16:53:58 03/07/09 (0)
- RE: Cics a few more questions - cics 09:47:08 03/08/09 (0)
- RE: Cics a few more questions - theob 10:59:32 03/08/09 (0)
- ok it didn't work... - theob 15:37:45 03/08/09 (0)
- RE: ok it didn't work... - cics 09:31:05 03/09/09 (0)
- ok will do nt - theob 09:32:55 03/09/09 (0)
- tried setting up tmpmusic on my c hd, this did not work either--- - theob 09:29:38 03/09/09 (0)
- Speaking off the top of my head - rickmcinnis@dogwoodfabrics.com 10:54:33 03/07/09 (0)
- RE: Speaking off the top of my head - theob 12:07:32 03/07/09 (0)
- My feed back on building the cMP transport as per cics manual - hfavandepas 15:37:39 02/18/09 (0)
- RE: My feed back on building the cMP transport as per cics manual - Nikola 09:28:06 02/19/09 (0)
- RE: My feed back on building the cMP transport as per cics manual - theob 05:20:53 02/19/09 (0)
- RE: My feed back on building the cMP transport as per cics manual - hfavandepas 11:50:08 02/19/09 (0)
- RE: My feed back on building the cMP transport as per cics manual - theob 11:55:16 02/19/09 (0)
- Additional changes not in documentation - cics 22:09:16 02/18/09 (0)
- Basic questions - TJF 02:30:16 02/18/09 (0)
- RE: Basic questions - cics 08:47:18 02/18/09 (0)
- RE: Basic questions - TJF 01:17:01 02/21/09 (0)
- RE: Basic questions - mesmer 07:45:05 02/18/09 (0)
- RE: Basic questions - TJF 08:14:44 02/18/09 (0)
- RE: Basic questions - mesmer 08:47:45 02/18/09 (0)
- RE: Basic questions - TJF 09:21:22 02/18/09 (0)
- RE: Basic questions - TJF 09:58:13 02/19/09 (0)
- RE: Basic questions - mesmer 00:59:20 02/20/09 (0)
- How to launch Beatport SYNC audioplayer with cMP? - hfavandepas 13:21:13 02/16/09 (0)
- Kingston HyperX KHX6400D2UL no longer available... - Bertel 14:18:57 02/12/09 (0)
- RE: Kingston HyperX KHX6400D2UL no longer available... - Audio Bling 20:44:17 02/12/09 (0)
- RE: Kingston HyperX KHX6400D2UL no longer available... - Bertel 23:01:24 02/12/09 (0)
- RE: Kingston HyperX KHX6400D2UL no longer available... - Audio Bling 23:13:56 02/12/09 (0)
- 256 mB is plenty for 24/192 in my experience - rickmcinnis@dogwoodfabrics.com 09:42:40 02/13/09 (0)
- Can I replace G31M-S2L with G31M-S2C? - Nikola 09:44:18 02/09/09 (0)
- Try Amazon - rickmcinnis@dogwoodfabrics.com 11:43:43 02/11/09 (0)
- RE: Try Amazon - Nikola 12:50:14 02/11/09 (0)
- RE: Try Amazon - theob 13:19:18 02/11/09 (0)
- Is there not an AMAZON in the EEC? - rickmcinnis@dogwoodfabrics.com 09:44:24 02/13/09 (0)
- RE: Try Amazon - Nikola 13:32:41 02/11/09 (0)
- RE: Try Amazon - theob 13:57:51 02/11/09 (0)
- RE: Try Amazon - Scuba 13:05:53 02/23/09 (0)
- RE: Try Amazon - cics 10:07:45 02/24/09 (0)
- RE: Try Amazon - Scuba 03:26:55 02/25/09 (0)
- playlist enhancements for cmp - seger 08:05:31 02/07/09 (0)
- RE: cMP - the open source high-end Memory Player - apolinaris 20:58:56 01/26/09 (0)
- RE: cMP - the open source high-end Memory Player - Audio Bling 22:13:43 01/26/09 (0)
- how do I shut down?? - easternlethal 03:03:27 01/18/09 (4)
- RE: how do I shut down?? - theob 04:27:04 01/18/09 (3)
- RE: how do I shut down?? - easternlethal 21:50:44 01/18/09 (2)
- RE: how do I shut down?? - theob 05:27:42 01/19/09 (1)
- RE: how do I shut down?? As Theo says... - sondale 06:24:12 01/19/09 (0)
- 'X' followed by No to Restart prompt will shutdown - cics 09:58:33 01/19/09 (0)
- RE: 'X' followed by No to Restart prompt will shutdown - easternlethal 18:29:02 01/19/09 (0)
- RE: 'X' followed by No to Restart prompt will shutdown - theob 15:16:37 01/20/09 (0)
- Try this: cMP settings » set Diagnostics to Yes » OK » 'X' » Yes » OK - cics 10:40:20 01/20/09 (0)
- RE: Try this: cMP settings » set Diagnostics to Yes » OK » 'X' » Yes » OK - easternlethal 20:05:32 01/21/09 (0)
- Memory requirements. - sondale 15:47:38 01/16/09 (0)
- Breaking up the tracks should make no difference - rickmcinnis@dogwoodfabrics.com 19:54:55 01/16/09 (0)
- Thanks - that saves some money. - sondale 00:36:29 01/17/09 (0)
- Just seen the new version of cPlay and its requirements - sondale 00:41:18 01/17/09 (0)
- CUE sheets and GENRE - sondale 15:19:39 01/16/09 (0)
- RE: CUE sheets and GENRE - riboge 15:30:09 01/16/09 (0)
- RE: CUE sheets and GENRE - sondale 16:11:01 01/16/09 (0)
- Some of these tools adds a leading character (sw bug) which must be removed - cics 10:08:37 01/19/09 (0)
- cMP in Diagrammatic form - sondale 11:02:46 01/08/09 (0)
- RE: cMP in Diagrammatic form - theob 11:11:01 01/08/09 (0)
- Latency on an EMU 0404 PCI Soundcard - sondale 01:30:26 01/06/09 (0)
- EMU allows for lower latencies - cics 23:26:09 01/06/09 (0)
- RE: EMU allows for lower latencies - sondale 04:35:55 01/08/09 (0)
- HyperX memory works a treat... - sondale 02:35:14 01/09/09 (0)
- RE: HyperX memory works a treat... - abysstw 03:20:45 01/09/09 (0)
- RE: HyperX memory works a treat...now I am confused! - sondale 04:35:23 01/09/09 (0)
- RE: Latency on an EMU 0404 PCI Soundcard - abysstw 05:05:29 01/06/09 (0)
- If not ZALMAN is anyone using an embedded display - sondale 04:34:28 01/05/09 (0)
- Best cMP mobo with dvi/hdmi? - hanssatink 12:20:57 12/29/08 (0)
- Nokia N800 control via VNC? - Kristian 16:11:12 12/08/08 (0)
- RE: Nokia N800 control via VNC? - cics 19:00:25 12/08/08 (0)
- Is ASIO required ? - DBB 01:42:08 12/08/08 (0)
- cMP allows for any player to be used. ASIO is only required for cPlay - cics 03:29:37 12/08/08 (0)
- Just to be sure, will it work with a dsp plugin -SRS Sandbox plugin ? - DBB 10:31:33 12/08/08 (0)
- RE: Just to be sure, will it work with a dsp plugin -SRS Sandbox plugin ? - cics 18:55:03 12/08/08 (0)
- Mobo mu-metal shielding - Kristian 09:25:27 12/05/08 (0)
- Mu-Metal Shielding... - gjwAudio 13:54:18 12/05/08 (0)
- RE: Mu-Metal Shielding... - Kristian 14:30:50 12/05/08 (0)
- There is always a compromise - rickmcinnis@dogwoodfabrics.com 15:23:43 12/05/08 (0)
- Just WHAT Are We Shielding Against... - gjwAudio 20:54:24 12/05/08 (0)
- RE: Just WHAT Are We Shielding Against... - Kristian 12:39:30 12/08/08 (0)
- I Don't Think The TT is Insane... - gjwAudio 21:08:05 12/09/08 (0)
- Better stream of consciousness ... - rickmcinnis@dogwoodfabrics.com 09:11:22 12/06/08 (0)
- WARNING: Lenco Turntable Talk... - gjwAudio 22:39:38 12/06/08 (0)
- Magnificent execution - rickmcinnis@dogwoodfabrics.com 07:33:06 12/07/08 (0)
- Trojan in cMP 1.2 ? - totozero 05:13:07 12/04/08 (0)
- RE: Trojan in cMP 1.2 ? - Uzeb 06:48:09 12/04/08 (0)
- Windows Help please (before I have to rebuild my cMP) - ckniker 11:16:08 11/26/08 (0)
- If you bought the GRANITE DIGITAL power supply - rickmcinnis@dogwoodfabrics.com 12:39:01 11/26/08 (0)
- The Search for Theo's Clock... - gjwAudio 22:29:58 11/20/08 (0)
- Update on external clock experiment - theob 11:24:42 12/15/08 (0)
- When A Little means A LOT ... - gjwAudio 16:17:24 12/16/08 (0)
- RE: When A Little means A LOT ... - theob 16:35:39 12/16/08 (0)
- ART Products Are Available from Long & McQuade... - gjwAudio 23:51:16 12/16/08 (0)
- RE: ART Products Are Available from Long & McQuade... - theob 03:48:45 12/18/08 (0)
- Store Locations / Ontario / North York / 2777 Steeles Avenue W. / 416-663-8612 / Recording Dept - gjwAudio 06:56:33 12/18/08 (0)
- RE: Store Locations / Ontario / North York / 2777 Steeles Avenue W. / 416-663-8612 / Recording Dept - theob 06:57:50 12/18/08 (0)
- RE: Store Locations / Ontario / North York / 2777 Steeles Avenue W. / 416-663-8612 / Recording Dept - Uzeb 07:18:54 12/18/08 (0)
- BLACK News from Black Lion - the Micro Clock won't do S/PDIF... - gjwAudio 22:08:32 11/30/08 (0)
- RE: BLACK News from Black Lion - the Micro Clock won't do S/PDIF... - theob 03:23:25 12/01/08 (0)
- RE: BLACK News from Black Lion - the Micro Clock won't do S/PDIF... - theob 12:56:23 12/01/08 (0)
- Hey ART... Y'Got The Time ? - gjwAudio 23:06:17 12/01/08 (0)
- You can't beat the price - rickmcinnis@dogwoodfabrics.com 09:49:09 12/02/08 (0)
- RE: You can't beat the price - theob 12:21:40 12/02/08 (0)
- RE: You can't beat the price - rickmcinnis@dogwoodfabrics.com 15:19:08 12/02/08 (0)
- RE: Hey ART... Y'Got The Time ? - theob 03:28:20 12/02/08 (0)
- ART = Yorkville Sound - gjwAudio 09:29:29 12/02/08 (0)
- RE: Hey ART... Y'Got The Time ? - hybride 04:13:25 12/02/08 (0)
- RE: Hey ART... Y'Got The Time ? - hybride 10:42:11 12/10/08 (0)
- RE: Hey ART... Y'Got The Time ? - theob 12:20:12 12/10/08 (0)
- RE: Hey ART... Y'Got The Time ? - Hybride 13:45:59 12/10/08 (0)
- RE: Hey ART... Y'Got The Time ? - theob 15:04:43 12/10/08 (0)
- RE: Hey ART... Y'Got The Time ? - Hybride 22:46:21 12/10/08 (0)
- RE: Hey ART... Y'Got The Time ? - theob 03:55:47 12/11/08 (0)
- RE: Hey ART... Y'Got The Time ? - theob 07:09:13 12/02/08 (0)
- Guitar Center won't give a 2 week trial on ART Synclock - theob 05:30:29 12/05/08 (0)
- What about replacing the crystal oscillators - rickmcinnis@dogwoodfabrics.com 08:30:40 11/21/08 (0)
- Yes Rick - You Can Clock Juli@ SANS Analogue Section... - gjwAudio 10:54:12 11/21/08 (0)
- RE: What about replacing the crystal oscillators - theob 10:42:47 11/21/08 (0)
- NO, it doesn't - rickmcinnis@dogwoodfabrics.com 12:12:21 11/21/08 (0)
- RE: The Search for Theo's Clock... - theob 02:58:09 11/21/08 (0)
- What does THAT mean... And how does it apply to External Clocking ? - gjwAudio 20:55:19 11/21/08 (0)
- RE: What does THAT mean... And how does it apply to External Clocking ? - theob 04:16:17 11/22/08 (0)
- RE: The Search for Theo's Clock... - edward 01:57:58 11/21/08 (0)
- RE: The Search for Theo's Clock... - theob 04:07:57 11/21/08 (0)
- RE: The Search for Theo's Clock... - Uzeb 11:13:29 11/21/08 (0)
- RE: The Search for Theo's Clock... - edward 11:38:34 11/21/08 (0)
- RE: The Search for Theo's Clock... - theob 12:31:15 11/21/08 (0)
- Start Saving Yer Shekels Theo... - gjwAudio 14:22:31 11/21/08 (0)
- Back to the input BNC - rickmcinnis@dogwoodfabrics.com 09:32:45 11/22/08 (0)
- RE: Back to the input BNC - theob 09:48:55 11/22/08 (0)
- Why EXT-CLOCK Helps Juli@ in (almost) ALL Cases... - gjwAudio 22:31:33 11/22/08 (0)
- RE: Why EXT-CLOCK Helps Juli@ in (almost) ALL Cases... - theob 02:36:32 11/23/08 (0)
- Answers? Quetions! Questions? Answers! - gjwAudio 13:19:10 11/23/08 (0)
- RE: Answers? Quetions! Questions? Answers! - theob 09:14:50 11/30/08 (0)
- RE: Answers? Quetions! Questions? Answers! - theob 13:34:15 11/23/08 (0)
- RE: Start Saving Yer Shekels Theo... - theob 15:38:47 11/21/08 (0)
- How about a netbook? - kukiman 08:42:52 11/19/08 (0)
- BNC mod for Juli@ - The Visual Version... - gjwAudio 09:38:26 11/16/08 (0)
- BNC mod for Juli@ low profile - ecir38 21:08:57 10/23/09 (0)
- RE: BNC mod for Juli@ low profile - DARKMATTER 14:22:48 03/17/10 (0)
- What do you do with the digital "in"? - rickmcinnis@dogwoodfabrics.com 18:45:34 11/16/08 (0)
- The Digital-IN is for Recording... - gjwAudio 22:35:28 11/16/08 (0)
- RE: The Digital-IN is for Recording... - theob 08:51:52 11/17/08 (0)
- RE: Externally Clocking the Juli@... - gjwAudio 15:47:02 11/17/08 (0)
- RE: Externally Clocking the Juli@... - theob 16:32:02 11/17/08 (0)
- External Clocking Clarifications... - gjwAudio 20:42:21 11/17/08 (0)
- RE: External Clocking Clarifications... - theob 05:20:08 11/18/08 (0)
- Better Clock Ref = Better Sound at ALL Sample Rates... - gjwAudio 08:13:19 11/18/08 (0)
- RE: Better Clock Ref = Better Sound at ALL Sample Rates... - theob 09:02:22 11/18/08 (0)
- RE: EXT Selected and NO incoming signal... - gjwAudio 09:53:46 11/18/08 (0)
- RE: EXT Selected and NO incoming signal... - theob 10:07:32 11/18/08 (0)
- If 44.1 Floats Yer Boat... Try This Experiment... - gjwAudio 19:05:19 11/18/08 (0)
- RE: If 44.1 Floats Yer Boat... Try This Experiment... - theob 04:03:04 11/19/08 (0)
- RE: If 44.1 Floats Yer Boat... Try This Experiment... - theob 09:27:54 11/19/08 (0)
- Attention Theo: You Must Act NOW !! - gjwAudio 10:16:08 11/19/08 (0)
- RE: Attention Theo: You Must Act NOW !! - theob 11:59:08 11/19/08 (0)
- It's like admonishing the Children - AU CONTRAIRE... - gjwAudio 14:07:46 11/19/08 (0)
- RE: It's like admonishing the Children - AU CONTRAIRE... - theob 14:25:42 11/19/08 (0)
- RE: It's like admonishing the Children - AU CONTRAIRE... - theob 04:56:02 11/20/08 (0)
- Clocks matter: panasonic dvd player good, opp 980 not good... - theob 13:45:02 11/20/08 (0)
- For clocking purposes only, it is expensive - rickmcinnis@dogwoodfabrics.com 15:09:40 11/17/08 (0)
- RE: For clocking purposes only, it is expensive - theob 16:51:49 11/17/08 (0)
- WORDCLOCK, S/PDIF and Splitting Digital Hairs... - gjwAudio 16:46:45 11/17/08 (0)
- Very completely at that! - rickmcinnis@dogwoodfabrics.com 08:06:42 11/17/08 (0)
- Just another suggestion... - Bertel 03:12:23 02/12/09 (0)
- Brilliant--wish I had a Bob!! nt - theob 10:18:31 11/16/08 (0)
- SATA CD/DVD drive (instead of IDE) - ckniker 12:25:37 11/13/08 (0)
- SATA ROM drives can be used as long as total power consumption doesn't exceed GD PS limit - cics 07:47:44 11/19/08 (0)
- RE: SATA ROM drives can be used as long as total power consumption doesn't exceed GD PS limit - ckniker 08:08:14 11/19/08 (0)
- RE: SATA CD/DVD drive (instead of IDE) - seger 12:33:30 11/13/08 (0)
- Lynx AES16 owners: breakout cable replacement - ckniker 08:03:22 11/11/08 (0)
- Recommended MB has been replaced - rickmcinnis@dogwoodfabrics.com 19:26:37 11/05/08 (22)
- It would seem the new G41 chipset would be desirable - rickmcinnis@dogwoodfabrics.com 09:34:18 11/08/08 (0)
- Q35 is best choice @ TDP of 13 watts (G31=15.5 & G41=25 watts) - cics 01:03:38 11/09/08 (0)
- Why not go all the way with the Gigabite GA-X38T-DQ6 - Ebit 17:08:26 11/10/08 (0)
- X38 TDP @ 26.5 watts is unlikely to be be a good start. Not yet tested DDR3. nt - cics 12:33:11 11/11/08 (0)
- RE: Why not go all the way with the Gigabite GA-X38T-DQ6 - theob 09:29:40 11/11/08 (0)
- Read the literature - rickmcinnis@dogwoodfabrics.com 08:41:27 11/11/08 (0)
- Did read it - Ebit 19:22:38 11/11/08 (0)
- I wish I knew enough to help - rickmcinnis@dogwoodfabrics.com 08:09:30 11/12/08 (0)
- As if "Q"'s were "G"'s to my assuming eyes - rickmcinnis@dogwoodfabrics.com 10:52:54 11/09/08 (0)
- Search for new mobo based on Intel's Q35 (or Q33) chipset - cics 06:07:47 11/07/08 (0)
- RE: Recommended MB has been replaced - ckniker 11:28:56 11/06/08 (11)
- The GA-G31M-ES2L mobo may not be optimal! - ckniker 21:24:41 11/06/08 (0)
- RE: The GA-G31M-ES2L mobo may not be optimal! - Ryelands 02:34:44 11/07/08 (0)
- RE: The GA-G31M-ES2L mobo may not be optimal! - ckniker 06:47:05 11/07/08 (0)
- RE: The GA-G31M-ES2L mobo may not be optimal! - Scuba 10:51:06 03/08/09 (0)
- Where was F6x? from the internet or on a memory stick? - rickmcinnis@dogwoodfabrics.com 14:57:03 11/06/08 (6)
- RE: Where was F6x? from the internet or on a memory stick? - olegpolitaev@gmail.com 23:20:26 11/16/12 (0)
- RE: Where was F6x? from the internet or on a memory stick? - ckniker 20:59:32 11/06/08 (0)
- I was hoping that could make a difference. - rickmcinnis@dogwoodfabrics.com 08:38:08 11/07/08 (0)
- Is Gigabite GA-G33M-S2L compatible? - Ebit 17:19:00 11/07/08 (0)
- Yikes ! Panic Attack - Children Go Hungry as MoBo is Ordered !! - gjwAudio 11:36:05 11/07/08 (0)
- RE: I was hoping that could make a difference. - Uzeb 10:54:15 11/07/08 (0)
- HANDS UP Everyone using the Zalman/Thermaltake HTPC Case... - gjwAudio 22:45:53 11/03/08 (0)
- OK... So is NOBODY using this Case ? - gjwAudio 11:08:44 11/07/08 (0)
- I know my fingers are not nimble enough - rickmcinnis@dogwoodfabrics.com 09:45:42 11/08/08 (0)
- I Would Love to see what you've done with Wood... - gjwAudio 14:54:18 11/09/08 (0)
- I will show you - rickmcinnis@dogwoodfabrics.com 08:17:54 11/12/08 (0)
- Does RAID impact sound quality? - craigus 15:48:36 11/01/08 (0)
- RAID is not critical - cics 16:44:51 11/01/08 (0)
- Alfred, I need your experise - re:Juli@ & BNC - rickmcinnis@dogwoodfabrics.com 12:35:13 11/01/08 (0)
- Rick could you please post a photo when complete - Thanks -nt. - gjwAudio 00:07:36 11/02/08 (0)
- I am afraid my fragile ego will not allow me to show - rickmcinnis@dogwoodfabrics.com 09:05:09 11/02/08 (0)
- No photo = Additional Description Needed... - gjwAudio 19:53:17 11/02/08 (0)
- Additional Description Given - rickmcinnis@dogwoodfabrics.com 08:29:14 11/03/08 (0)
- RE: I am afraid my fragile ego will not allow me to show - sonics 10:17:06 11/02/08 (0)
- RE: Alfred, I need your experise - re:Juli@ & BNC - sonics 15:29:51 11/01/08 (0)
- Asio4All doesn't work with minlogon - riboge 12:55:58 10/31/08 (0)
- Solved by Reinstalling Within Minlogon - riboge 13:06:15 11/02/08 (0)
- Library Scanning Behaviour in cMP Program... - gjwAudio 07:14:36 10/31/08 (0)
- RE: Library Scanning Behaviour in cMP Program... - seger 09:54:30 11/01/08 (0)
- RE: Add/Remove Music Library Folders... - gjwAudio 10:32:36 11/01/08 (0)
- RE: Library Scanning Behaviour in cMP Program... - kocsu 09:08:59 11/01/08 (0)
- RE: Use a Multi-boot System... - gjwAudio 11:05:02 11/01/08 (0)
- Still need to fix library access beyond desktop using Vista - riboge 06:18:22 10/31/08 (0)
- Tweak your cMP Hardware With Stabilant 22-A... - gjwAudio 14:02:48 10/30/08 (0)
- RE: Tweak your cMP Hardware With Stabilant 22-A... - gagnem 19:56:02 10/31/08 (0)
- RE: Tweak your cMP Hardware With Stabilant 22-A... - chipzahoy 17:45:55 10/30/08 (0)
- RE: Tweak your cMP Hardware With Stabilant 22-A... - theob 16:05:04 10/30/08 (0)
- RE: Where to start with Stabilant 22-A... - gjwAudio 22:05:16 10/30/08 (0)
- Just ordered - thanks for the notice - rickmcinnis@dogwoodfabrics.com 09:02:45 10/31/08 (0)
- Applying Stabilant 22-A to the mobo... - gjwAudio 22:49:08 10/31/08 (0)
- Thanks for the advice, the cautions, and the admonitions - rickmcinnis@dogwoodfabrics.com 08:41:06 11/01/08 (0)
- No Admonitions for you Rick... - gjwAudio 11:13:21 11/01/08 (0)
- Lynx AES16-SRC: which device driver? - ckniker 14:08:30 10/29/08 (0)
- I use Lynx AES16-XLR with latest firmware (rev 25) and driver (2.0 rev 16) for 24/192 dual aes output - cics 11:09:05 10/30/08 (0)
- RE: I use Lynx AES16-XLR with latest firmware (rev 25) and driver (2.0 rev 16) for 24/192 dual aes output - Bertel 04:35:27 02/12/09 (0)
- RE: I use Lynx AES16-XLR with latest firmware (rev 25) and driver (2.0 rev 16) for 24/192 dual aes output - cics 10:22:58 02/12/09 (0)
- RE: I use Lynx AES16-XLR with latest firmware (rev 25) and driver (2.0 rev 16) for 24/192 dual aes output - Bertel 10:42:08 02/12/09 (0)
- RE: I use Lynx AES16-XLR with latest firmware (rev 25) and driver (2.0 rev 16) for 24/192 dual aes output - ckniker 12:15:24 10/30/08 (0)
- RE: I use Lynx AES16-XLR with latest firmware (rev 25) and driver (2.0 rev 16) for 24/192 dual aes output - Ebit 17:29:14 10/31/08 (0)
- What is the Best Choice for a Laptop to run cMP? - riboge 13:56:38 10/29/08 (0)
- RE: What is the Best Choice for a Laptop to run cMP? - kocsu 20:08:33 10/29/08 (0)
- RE: What is the Best Choice for a Laptop to run cMP? - riboge 05:09:07 10/30/08 (0)
- RE: What is the Best Choice for a Laptop to run cMP? - kocsu 08:26:38 11/01/08 (0)
- RE: What is the Best Choice for a Laptop to run cMP? - chipzahoy 16:58:00 10/29/08 (0)
- RE: What is the Best Choice for a Laptop to run cMP? - riboge 17:10:34 10/29/08 (0)
- cMP 1.2 Final Released - cics 04:52:25 10/26/08 (7)
- Problem with spaces - pb 01:05:49 10/30/08 (0)
- Correct format is REM GENRE "hard rock" (with REM GENRE in caps). nt - cics 10:57:34 10/30/08 (0)
- RE: cMP 1.2 Final Released - theob 05:21:41 10/26/08 (0)
- Hit the bottom left button with "cMP²" picture - this takes you to settings. nt - cics 07:30:47 10/26/08 (0)
- RE: Hit the bottom left button with "cMP²" picture - this takes you to settings. nt - theob 08:11:54 10/26/08 (0)
- Tremendous step forward in sonics... - theob 08:36:10 10/26/08 (0)
- RE: Tremendous step forward in sonics... - theob 09:18:01 10/26/08 (0)
- cMP 1.1 Final Release - cics 02:58:07 10/25/08 (1)
- RE: cMP 1.1 Final Release - chipzahoy 22:10:08 10/25/08 (0)
- RE: cMP 1.1 Final Release - theob 13:49:12 10/25/08 (0)
- RE: cMP 1.1 Final Release - riboge 07:08:21 10/25/08 (0)
- RE: Secret Rabbit Code & Foobar2000 - jneber@hotmail.com 21:35:57 10/14/08 (0)
- RE: Secret Rabbit Code & Foobar2000 - cics 11:46:07 10/15/08 (0)
- RE: Secret Rabbit Code & Foobar2000 - jacabuneb 21:08:03 10/15/08 (0)
- Use EAC for cuesheets if you have the CD, Foobar cuesheet-creator if you don't. nt - seger 04:02:55 10/16/08 (0)
- Use cue sheets for wav & flac with cPlay 2.x (=playlist playback). Seger creates cue sheets using foobar. nt - cics 02:03:15 10/16/08 (0)
- ESI Juli@ Mod: BNC Jack Mounted/Soldered Directly to the Board ? - gjwAudio 21:55:03 10/13/08 (0)
- Do you have a multi meter? - rickmcinnis@dogwoodfabrics.com 12:40:52 10/14/08 (0)
- RE: Do you have a multi meter? - sonics 13:28:33 10/14/08 (0)
- BNC mod for M-Audio 2496 card - gjwAudio 15:47:59 10/14/08 (0)
- Very clever, gjw - rickmcinnis@dogwoodfabrics.com 16:46:27 10/14/08 (0)
- If your Juli@ has analogue section removed, use the vacant holes... - gjwAudio 20:28:38 10/14/08 (0)
- RE: If your Juli@ has analogue section removed, use the vacant holes... - sonics 00:56:59 10/18/08 (0)
- RE: If your Juli@ has analogue section removed, use the vacant holes... - gagnem 05:43:19 10/18/08 (0)
- RE: If your Juli@ has analogue section removed, use the vacant holes... - sonics 06:19:52 10/18/08 (0)
- Current "Best" PSU Recommendation ? - gjwAudio 21:28:27 10/13/08 (0)
- ZEN 400 is decent - edward 19:57:44 10/27/08 (0)
- RE: ZEN 400 is decent - chipzahoy 00:10:00 10/28/08 (0)
- RE: Current "Best" PSU Recommendation ? - hanssatink 04:16:36 10/16/08 (0)
- ANTEC still tests better for ripple - rickmcinniis@dogwoodfabrics.com 09:25:20 10/16/08 (0)
- RE: ANTEC still tests better for ripple - hanssatink 12:51:08 10/16/08 (0)
- RE: ANTEC still tests better for ripple - Audio Bling 19:23:18 10/19/08 (0)
- But that still says nothing about the ripple spec - rickmcinnis@dogwoodfabrics.com 14:59:48 10/16/08 (0)
- RE: Current "Best" PSU Recommendation ? - Audio Bling 17:18:20 10/14/08 (0)
- cics recommended the ANTEC Earthworks EA430 - rickmcinnis@dogwoodfabrics.com 16:55:53 10/14/08 (0)
- RE: Current "Best" PSU Recommendation ? - abysstw 23:32:07 10/13/08 (0)
- cMP PSU Recommendations: Better, Best... and UNOBTAINIUM - gjwAudio 00:16:31 10/18/08 (0)
- RE: cMP PSU Recommendations: Better, Best... and UNOBTAINIUM - seger 11:38:46 10/18/08 (0)
- RE: cMP PSU Recommendations: Better, Best... and UNOBTAINIUM - abysstw 13:51:49 10/18/08 (0)
- RE: cMP PSU Recommendations: Better, Best... and UNOBTAINIUM - seger 15:08:06 10/18/08 (0)
- RE: cMP PSU Recommendations: Better, Best... and UNOBTAINIUM - chipzahoy 18:09:26 10/18/08 (0)
- RE: cMP PSU Recommendations: Better, Best... and UNOBTAINIUM - abysstw 11:20:06 10/18/08 (0)
- RE: cMP PSU Recommendations: Better, Best... and UNOBTAINIUM - Audio Bling 21:45:11 11/16/08 (0)
- RE: cMP PSU Recommendations: Better, Best... and UNOBTAINIUM - sonics 00:49:40 10/18/08 (0)
- cMP Installation Guide & User Manual - Download Link MIA ? - gjwAudio 20:50:34 10/13/08 (0)
- No... Brain is MIA !! - Found link where it should be. - gjwAudio 22:29:46 10/13/08 (0)
- Taking care of servces in cmp - theob 16:12:36 10/02/08 (0)
- I figured it out, too late to delete post nt - theob 05:51:55 10/05/08 (0)
- Easy Minlogon without disabling WFP - seger 05:02:18 10/02/08 (0)
- RE: Easy Minlogon without disabling WFP - theob 15:59:42 10/03/08 (0)
- RE: Easy Minlogon without disabling WFP - seger 03:42:44 10/04/08 (0)
- RE: Easy Minlogon without disabling WFP - theob 17:02:32 10/04/08 (0)
- RE: Easy Minlogon without disabling WFP - riboge 16:37:39 10/03/08 (0)
- RE: Easy Minlogon without disabling WFP - riboge 12:41:32 10/02/08 (0)
- The problem is with ASIO4All - riboge 07:57:38 10/03/08 (0)
- RE: Easy Minlogon without disabling WFP - theob 06:00:33 10/03/08 (0)
- RE: Easy Minlogon without disabling WFP - seger 13:38:35 10/02/08 (0)
- RE: Easy Minlogon without disabling WFP - riboge 13:50:01 10/02/08 (0)
- RE: Easy Minlogon without disabling WFP - seger 03:34:16 10/03/08 (0)
- RE: Easy Minlogon without disabling WFP - theob 10:39:50 10/02/08 (0)
- RE: Easy Minlogon without disabling WFP - seger 12:24:14 10/02/08 (0)
- RE: Easy Minlogon without disabling WFP - theob 14:36:28 10/02/08 (0)
- RE: Easy Minlogon without disabling WFP - seger 02:52:30 10/03/08 (0)
- RE: Easy Minlogon without disabling WFP - Ryelands 05:02:47 10/03/08 (0)
- RE: Easy Minlogon without disabling WFP - seger 08:08:12 10/03/08 (0)
- RE: Easy Minlogon without disabling WFP - Ryelands 09:17:38 10/03/08 (0)
- RE: Easy Minlogon without disabling WFP - seger 10:19:35 10/03/08 (0)
- RE: Easy Minlogon without disabling WFP - theob 05:00:26 10/03/08 (0)
- RE: Easy Minlogon without disabling WFP - theob 05:20:18 10/03/08 (0)
- RE: Easy Minlogon without disabling WFP - theob 05:54:05 10/02/08 (0)
- Case Selection: Zalman HD160XT Plus or Moneul 972 - Cyberlacunae 23:46:21 09/26/08 (0)
- cMP - no files in explorer window, only desktop?? - hybride 06:38:30 09/09/08 (0)
- RE: cMP - no files in explorer window, only desktop?? - riboge 15:23:48 09/09/08 (0)
- RE: cMP - no files in explorer window, only desktop?? - hybride 04:37:49 09/10/08 (0)
- RE: cMP - no files in explorer window, only desktop?? - hybride 10:40:48 09/09/08 (0)
- RE: cMP - no files in explorer window, only desktop?? - jammypan@gmail.com 23:05:19 09/11/08 (0)
- How does cMP^2 sound on Vista? - chipzahoy 10:06:01 09/22/08 (0)
- RE: How does cMP^2 sound on Vista? - jammypan@gmail.com 18:28:12 09/22/08 (0)
- RE: How does cMP^2 sound on Vista? - chipzahoy 10:53:18 09/23/08 (0)
- RE: How does cMP^2 sound on Vista? - riboge 07:55:04 09/23/08 (0)
- How to use cMP+cPLAY? - jammypan@gmail.com 07:34:45 09/26/08 (0)
- RE: How to use cMP+cPLAY? - Ryelands 09:31:24 09/26/08 (0)
- RE: Thanks to all,I play cPLAY in cMP successful. - jammypan@gmail.com 18:23:07 09/29/08 (0)
- RE: How to use cMP+cPLAY? - theob 08:21:43 09/26/08 (0)
- RE: How does cMP^2 sound on Vista? - jammypan@gmail.com 22:16:55 09/24/08 (0)
- USE cMP^2 sound on Vista result - jammypan@gmail.com 05:52:09 09/27/08 (0)
- RE: USE cMP^2 sound on Vista result - theob 06:33:44 09/27/08 (0)
- RE: USE cMP^2 sound on Vista result - jammypan@gmail.com 07:12:59 09/27/08 (0)
- RE: USE cMP^2 sound on Vista result - theob 08:23:12 09/27/08 (0)
- RE: USE cMP^2 sound on Vista result - jammypan@gmail.com 21:28:34 10/09/08 (0)
- RE: USE cMP^2 sound on Vista result - seger 01:50:53 10/10/08 (0)
- Don't have Vista but I know others are using it successfully - cics 12:09:40 09/09/08 (0)
- Goto to settings and set your music folders that contain .cue files. Directories are accessed via Explore. nt - cics 10:26:52 09/09/08 (0)
- UPDATE: cMP² (cMP+cPlay) new hardware (Gigabayte GA-G31M2SL & E7200) setup - cics 12:13:19 09/03/08 (1)
- Problem solved - found previous release notes. - sondale 07:33:57 01/04/09 (0)
- RE: Problem solved - found previous release notes. - Ryelands 08:06:45 01/04/09 (0)
- RE: Problem solved - found previous release notes. - sondale 09:26:55 01/04/09 (0)
- All up and running. - sondale 10:34:04 01/04/09 (0)
- Problems trying to run cMP - sondale 15:29:53 01/03/09 (0)
- special switches for BIOS features? - ckniker 10:54:45 11/17/08 (0)
- RE: special switches for BIOS features? - theob 11:12:45 11/17/08 (0)
- RE: special switches for BIOS features? - ckniker 11:20:54 11/17/08 (0)
- CPU GTLREF Voltage Ratio at 0.566 is recommended. nt - cics 18:18:25 09/22/08 (0)
- Great you got the spread spectrum disable capability on new bios drivers - theob 14:36:45 09/03/08 (0)
- Intel Q6600 - ivigueras@terra.es 02:20:26 08/26/08 (0)
- Avoid it - high power consumption @TDP=95W vs E7200's 65W. Also, no benefit from extra 2 cores. nt - cics 10:52:24 08/27/08 (0)
- RE: Avoid it - high power consumption @TDP=95W vs E7200's 65W. Also, no benefit from extra 2 cores. nt - Cyberlacunae 22:03:13 09/04/08 (0)
- Applies to XP and Vista - cics 04:00:36 09/05/08 (0)
- Kernel Optimisation: Add "/nopae" to boot.ini file - cics 10:09:31 08/22/08 (1)
- Don't use "/nopae" optimisation - cics 10:16:42 08/29/08 (0)
- RE: Kernel Optimisation: Add "/nopae" to boot.ini file - gagnem 13:04:05 08/25/08 (0)
- CPU Voltage @ 1.00625V (CPU-Z @ 0.976V) - no problems @ 96k. Try higher Clock - cics 10:56:49 08/27/08 (0)
- Simple to install a BNC - rickmcinnis@dogwoodfabrics.com 09:48:20 08/26/08 (0)
- RE: Simple to install a BNC - sonics 12:59:44 08/26/08 (0)
- RE: Simple to install a BNC - gjwAudio 10:51:20 10/11/08 (0)
- I will never know since I do not have an optical receiver - rickmcinnis@dogwoodfabrics.com 16:20:20 08/26/08 (0)
- RE: Kernel Optimisation: Add "/nopae" to boot.ini file - theob 13:53:32 08/25/08 (0)
- RE: Kernel Optimisation: Add "/nopae" to boot.ini file - gagnem 14:40:44 08/25/08 (0)
- Also set lower CPU Voltage - cics 19:23:30 08/23/08 (0)
- RE: Also set lower CPU Voltage - theob 05:59:08 08/24/08 (0)
- CPU Voltage now set to 1.01250V, Vcc is 0.976V (CPU-Z @idle) - cics 17:23:51 08/24/08 (0)
- RE: CPU Voltage now set to 1.01250V, Vcc is 0.976V (CPU-Z @idle) - theob 06:40:34 08/25/08 (0)
- In making Kernal changes(page 40 of 46) in AOB transports - theob 07:46:49 08/25/08 (0)
- Clock set to 180 Perfect on my system - theob 09:00:57 08/25/08 (0)
- RE: Kernel Optimisation: Add "/nopae" to boot.ini file - theob 16:47:20 08/23/08 (0)
- Will do - rickmcinnis@dogwoodfabrics.com 09:12:44 08/23/08 (0)
- Why use cmp software with juli if you can't get suspension of... - theob 05:43:24 08/17/08 (0)
- Yes. cMP software explained... - cics 23:13:19 08/17/08 (0)
- RE: cMP - the open source high-end Memory Player - jammypan@gmail.com 05:52:17 08/09/08 (0)
- cMP and cPlay will run on Vista, but - cics 09:04:01 08/10/08 (0)
- RE: cMP and cPlay will run on Vista, but - jammypan@gmail.com 20:41:41 08/10/08 (0)
- XP SP2 pro is a better option - cics 23:30:48 08/10/08 (0)
- RE: XP SP2 pro is a better option - jammypan@gmail.com 08:03:49 08/14/08 (0)
- RE: XP SP2 pro is a better option - Cyberlacunae 13:50:36 08/20/08 (0)
- RE: XP SP2 pro is a better option - jammypan@gmail.com 19:07:47 08/20/08 (0)
- What flavor of VIsta are you running? - cics 11:20:16 08/14/08 (0)
- RE: What flavor of VIsta are you running? - jammypan@gmail.com 18:12:48 08/14/08 (0)
- Yes that means Vista SP1 Enterprise version allows for AWE. - cics 02:53:27 08/16/08 (0)
- RE: Yes that means Vista SP1 Enterprise version allows for AWE. - jammypan@gmail.com 04:47:25 08/17/08 (0)
- RE: cMP and cPlay will run on Vista, but - msjjr 10:32:32 08/10/08 (0)
- RE: cMP and cPlay will run on Vista, but - cics 23:32:08 08/10/08 (0)
- RE: cMP and cPlay will run on Vista, but - TJF 01:08:28 02/17/09 (0)
- RE: cMP and cPlay will run on Vista, but - seger 03:43:11 02/17/09 (0)
- RE: cMP and cPlay will run on Vista, but - TJF 03:57:42 02/17/09 (0)
- RE: cMP and cPlay will run on Vista, but - seger 05:20:06 02/17/09 (0)
- cMP new hardware + Juli@w/0.979 drivers + cPlay 145 SNR - 1 step backwards, 2 steps forward - seger 03:12:05 08/06/08 (29)
- RE: cMP new hardware + Juli@w/0.979 drivers + cPlay 145 SNR - 1 step backwards, 2 steps forward - theob 13:59:57 08/19/08 (14)
- RE: cMP new hardware + Juli@w/0.979 drivers + cPlay 145 SNR - 1 step backwards, 2 steps forward - seger 03:49:52 08/20/08 (13)
- Now what? I have new computer with external gd supply to hd, juli running @ 192 - theob 07:36:59 08/20/08 (12)
- Cics here is some intitial feedback on... - theob 11:08:05 08/20/08 (11)
- You need a lower CPU voltage for passive CPU cooling - cics 07:36:41 08/21/08 (10)
- RE: You need a lower CPU voltage for passive CPU cooling - Bertel 13:53:20 02/12/09 (0)
- RE: You need a lower CPU voltage for passive CPU cooling - theob 08:14:50 08/21/08 (9)
- Cics: I lLoaded cmp sw - theob 11:02:26 08/21/08 (7)
- There's more performance to be had - cics 00:08:49 08/22/08 (0)
- RE: There's more performance to be had - theob 17:05:11 08/22/08 (0)
- RE: Cics: I lLoaded cmp sw - seger 12:51:32 08/21/08 (0)
- I appreciate your help... - theob 12:58:55 08/21/08 (0)
- RE: I appreciate your help... - seger 04:33:09 08/22/08 (0)
- RE: I appreciate your help... - theob 05:34:20 08/22/08 (0)
- RE: I appreciate your help... - Ryelands 06:04:03 08/22/08 (0)
- You are a gentleman! - theob 06:51:55 08/22/08 (0)
- RE: You need a lower CPU voltage for passive CPU cooling - Ryelands 08:51:13 08/21/08 (0)
- RE: cMP new hardware + Juli@w/0.979 drivers + cPlay 145 SNR - 1 step backwards, 2 steps forward - cics 08:47:00 08/06/08 (0)
- RE: cMP new hardware + Juli@w/0.979 drivers + cPlay 145 SNR - 1 step backwards, 2 steps forward - seger 11:22:53 08/06/08 (0)
- RE: cMP new hardware + Juli@w/0.979 drivers + cPlay 145 SNR - 1 step backwards, 2 steps forward - cics 12:46:34 08/06/08 (0)
- CPU/RAM Tuning and Temperature Monitoring in cMP - seger 05:21:51 08/07/08 (0)
- RE: CPU/RAM Tuning and Temperature Monitoring in cMP - cics 06:26:06 08/07/08 (0)
- RE: CPU/RAM Tuning and Temperature Monitoring in cMP - seger 09:54:25 08/07/08 (0)
- RE: CPU/RAM Tuning and Temperature Monitoring in cMP - cics 00:05:37 08/08/08 (0)
- RE: CPU/RAM Tuning and Temperature Monitoring in cMP - seger 01:56:22 08/08/08 (0)
- ReaTemp results - cics 02:15:01 08/09/08 (0)
- RE: ReaTemp results - seger 04:50:45 08/09/08 (0)
- RE: cMP new hardware + Juli@w/0.979 drivers + cPlay 145 SNR - 1 step backwards, 2 steps forward - seger 14:00:55 08/06/08 (0)
- RE: cMP new hardware + Juli@w/0.979 drivers + cPlay 145 SNR - 1 step backwards, 2 steps forward - theob 09:40:19 08/06/08 (0)
- Install GA-G31M-S2L - there's more experience with this mobo. - cics 11:05:55 08/06/08 (0)
- RE: Install GA-G31M-S2L - there's more experience with this mobo. - theob 11:12:32 08/06/08 (0)
- RE: cMP - the open source high-end Memory Player - monaco 14:04:29 08/01/08 (0)
- DC-DC-Converter ? - frennekamp@netcologne.de 15:41:25 07/07/08 (0)
- How to implement many of cmp ideas for a non-dedicated pc - theob 11:58:48 06/29/08 (0)
- RE: How to implement many of cmp ideas for a non-dedicated pc - Frodan 13:34:12 06/29/08 (0)
- RE: How to implement many of cmp ideas for a non-dedicated pc - theob 09:13:49 07/26/08 (0)
- RE: How to implement many of cmp ideas for a non-dedicated pc - Ryelands 05:58:18 07/26/08 (0)
- RE: How to implement many of cmp ideas for a non-dedicated pc - Frodan 02:57:45 07/26/08 (0)
- Let me ask the question differently - theob 11:26:24 06/30/08 (0)
- thanks very much but - theob 13:52:36 06/29/08 (0)
- RE: cMP - the open source high-end Memory Player - Frodan 08:58:10 06/26/08 (0)
- On new build, use NEW hardware recommended and run cMP sw without nLite customizations - cics 11:13:36 06/26/08 (0)
- Someone to Make cMP for Me? - riboge 06:52:47 06/25/08 (0)
- You should do it yourself because ... - rickmcinnis@dogwoodfabrics.com 08:08:14 06/26/08 (0)
- RE: cMP - the open source high-end Memory Player - seger 14:23:49 06/02/08 (0)
- RE: cMP - the open source high-end Memory Player - terry j 21:27:08 06/13/08 (0)
- RE: cMP - the open source high-end Memory Player - terry j 17:01:37 08/21/09 (0)
- RE: cMP - the open source high-end Memory Player - Dawnrazor 20:14:00 08/22/09 (0)
- RE: cMP - the open source high-end Memory Player - terry j 22:27:12 08/22/09 (0)
- RE: cMP - the open source high-end Memory Player - terry j 07:42:27 08/24/09 (0)
- RE: cMP - the open source high-end Memory Player - Dawnrazor 21:13:51 08/24/09 (0)
- RE: cMP - the open source high-end Memory Player - terry j 23:19:23 08/24/09 (0)
- RE: cMP - the open source high-end Memory Player - terry j 06:57:19 08/25/09 (0)
- RE: cMP - the open source high-end Memory Player - terry j 07:20:14 08/25/09 (0)
- RE: cMP - the open source high-end Memory Player - seger 03:31:18 08/24/09 (0)
- RE: cMP - the open source high-end Memory Player - Dawnrazor 09:19:33 08/23/09 (0)
- RE: cMP - the open source high-end Memory Player - terry j 21:46:07 08/22/09 (0)
- RE: cMP - the open source high-end Memory Player - terry j 05:06:38 08/16/08 (0)
- USB, cue sheets, latency, mouse, etc. - cics 11:03:34 08/16/08 (0)
- Just so that I can understand better - theob 13:07:28 08/17/08 (0)
- RE: USB, cue sheets, latency, mouse, etc. - terry j 06:34:39 08/17/08 (0)
- RE: USB, cue sheets, latency, mouse, etc. - terry j 01:27:53 08/30/08 (0)
- Make sure you're using latest BIOS (F6) - this removes tics and - cics 23:08:55 08/17/08 (0)
- RE: Make sure you're using latest BIOS (F6) - this removes tics and - theob 12:30:31 08/18/08 (0)
- RE: Make sure you're using latest BIOS (F6) - this removes tics and - Ryelands 09:01:52 08/18/08 (0)
- RE: Make sure you're using latest BIOS (F6) - this removes tics and - theob 08:11:35 08/18/08 (0)
- RE: Questions - cics 23:09:27 06/13/08 (0)
- RE: Questions - terry j 20:25:20 06/16/08 (0)
- RE: Questions - cics 23:34:54 06/17/08 (0)
- RE: Questions - terry j 01:14:53 06/23/08 (0)
- RE: Questions - Frodan 09:13:56 06/26/08 (0)
- RE: Questions - terry j 23:03:26 06/28/08 (0)
- RE: Questions - Ryelands 04:39:37 06/23/08 (0)
- RE: Questions - terry j 05:01:54 06/23/08 (0)
- RE: Questions - cics 10:45:10 06/23/08 (0)
- RE: Questions - terry j 17:13:00 06/23/08 (0)
- That's excellent feedback! Thanks. - cics 09:35:42 06/24/08 (0)
- RE: That's excellent feedback! Thanks. - terry j 21:24:39 06/24/08 (0)
- RE: That's excellent feedback! Thanks. - cics 05:57:58 06/25/08 (0)
- RE: That's excellent feedback! Thanks. - terry j 22:44:18 06/28/08 (0)
- RE: That's excellent feedback! Thanks. - terry j 01:27:13 06/29/08 (0)
- RE: Questions - cics 12:16:35 06/29/08 (0)
- RE: Questions - terry j 06:33:00 06/30/08 (0)
- Upsampler SNR 121db vs 145db - cics 23:33:19 06/30/08 (0)
- ok I've got Granite Digitals coming for hdd... - theob 13:26:28 05/17/08 (0)
- EAC cuesheets for separate wav files - seger 00:01:13 05/09/08 (0)
- Are you using cPlay as the cue player? - cics 05:11:41 05/09/08 (0)
- RE: Are you using cPlay as the cue player? - seger 05:32:02 05/09/08 (0)
- RE: Are you using cPlay as the cue player? - cics 15:42:58 05/09/08 (0)
- RE: Are you using cPlay as the cue player? - seger 09:14:41 05/10/08 (0)
- RE: EAC cuesheets for separate wav files - seger 03:16:40 05/09/08 (0)
- patriotmemory.com ? - Multiblitz 15:33:59 05/07/08 (0)
- Try this player using cMP... - cics 12:38:19 05/05/08 (0)
- cMP 1.0 final released - cics 02:40:36 05/04/08 (0)
- The most exciting thread of all - rickmcinnis@dogwoodfabrics.com 09:32:58 05/05/08 (0)
- RE: cMP 1.0 final released - multiblitz 11:36:28 05/04/08 (0)
- Cuesheet creator for foobar/cMP - seger 15:26:27 04/29/08 (0)
- RE: Cuesheet creator for foobar/cMP - theob 07:15:54 05/10/08 (0)
- RE: Cuesheet creator for foobar/cMP - seger 08:18:57 05/10/08 (0)
- RE: Cuesheet creator for foobar/cMP - theob 09:51:54 05/10/08 (0)
- RE: Cuesheet creator for foobar/cMP - seger 10:34:13 05/10/08 (0)
- RE: Cuesheet creator for foobar/cMP - theob 05:37:44 05/11/08 (0)
- RE: Cuesheet creator for foobar/cMP - seger 06:13:51 05/11/08 (0)
- RE: Cuesheet creator for foobar/cMP - theob 06:17:51 05/11/08 (0)
- RE: Cuesheet creator for foobar/cMP - seger 06:46:48 05/11/08 (0)
- USB audio out and Separate Touch Screen LCD - fibcouple 08:00:01 04/24/08 (0)
- RE: USB audio out and Separate Touch Screen LCD - cics 18:42:33 04/25/08 (0)
- RE: USB audio out and Separate Touch Screen LCD - fibcouple 01:28:27 04/26/08 (0)
- Album Player would work in cMP - cics 07:03:50 05/03/08 (0)
- RE: USB audio out and Separate Touch Screen LCD - multiblitz 14:54:50 04/25/08 (0)
- RE: USB audio out and Separate Touch Screen LCD - fibcouple 01:17:03 04/26/08 (0)
- First results from my listening test,,, - multiblitz 11:56:16 04/20/08 (0)
- RE: First results from my listening test,,, - cics 17:21:49 04/21/08 (0)
- RE: First results from my listening test,,, - Multiblitz 10:57:13 05/04/08 (0)
- RE: First results from my listening test,,, - Multiblitz 14:02:10 04/22/08 (0)
- When using SRC, try setting foobar's output buffer length to 500ms (or more) - cics 18:29:14 04/25/08 (0)
- Power supply of interest? - rickmcinnis@dogwoodfabrics.com 07:34:22 04/14/08 (0)
- RE: Power supply of interest? - cics 10:42:31 04/15/08 (0)
- RE: Power supply of interest? - frennekamp@netcologne.de 16:11:25 05/09/08 (0)
- REGEDIT questions - rickmcinnis@dogwoodfabrics.com 18:28:00 04/13/08 (0)
- RE: REGEDIT questions - cics 10:34:23 04/15/08 (0)
- MINLOGON implementation experience - rickmcinnis@dogwoodfabrics.com 12:11:48 04/13/08 (0)
- RE: MINLOGON implementation experience - ninekit 18:28:30 07/21/08 (0)
- RE: MINLOGON implementation experience - seger 08:53:58 07/22/08 (0)
- Thanks seger (nt) - ninekit 19:58:22 07/22/08 (0)
- What is the best soundcard ? - frennekamp@netcologne.de 03:32:04 03/30/08 (0)
- Lynx / RME would be excellent options - no harm in getting the Juli@ as well - cics 08:03:38 03/31/08 (0)
- RE: Lynx / RME would be excellent options - no harm in getting the Juli@ as well - promet 01:23:13 04/04/08 (0)
- I'm using version 0.979 drivers on XP SP 2 professional - cics 05:47:34 04/07/08 (0)
- Finetuning cMP - cics 05:22:54 03/29/08 (0)
- So who will be the first to try? - rickmcinnis@dogwoodfabrics.com 09:55:02 03/31/08 (0)
- Your approach would work - cics 10:33:14 03/31/08 (0)
- It is not allowed - rickmcinnis@dogwoodfabrics.com 12:39:57 04/02/08 (0)
- Thx. Those 2 options should remain. Windows does require activation (esp with h/w changes). - cics 05:29:31 04/03/08 (0)
- Please elaborate - rickmcinnis@dogwoodfabrics.com 09:05:23 04/03/08 (0)
- RE: Please elaborate - cics 10:17:34 04/03/08 (0)
- Mr Cics - theob 09:34:29 04/04/08 (0)
- RE: Mr Cics - cics 06:14:26 04/07/08 (0)
- I have made progress - theob 03:54:59 04/09/08 (0)
- RE: I have made progress - cics 12:44:44 04/09/08 (0)
- RE: I have made progress - theob 13:50:55 04/09/08 (0)
- RE: I have made progress - cics 10:52:34 04/10/08 (0)
- one more ... and then another - rickmcinnis@dogwoodfabrics.com 14:31:50 04/03/08 (0)
- RE: one more ... and then another - cics 06:22:09 04/07/08 (0)
- Could one use one of those USB memories ... - rickmcinnis@dogwoodfabrics.com 10:46:08 04/07/08 (0)
- RE: Could one use one of those USB memories ... - cics 08:20:50 04/08/08 (0)
- RE: Could one use one of those USB memories ... - rickmcinnis@dogwoodfabrics.com 09:08:27 04/08/08 (0)
- RE: Could one use one of those USB memories ... - cics 06:50:40 04/09/08 (0)
- Sure wish I had known that before!!!! - rickmcinnis@dogwoodfabrics.com 09:06:05 04/11/08 (0)
- RE: Sure wish I had known that before!!!! - cics 11:40:27 04/11/08 (0)
- Quality of PSU - multiblitz 15:54:39 03/27/08 (0)
- RE: Quality of PSU - cics 23:59:18 03/27/08 (0)
- RE: Quality of PSU - ninekit 01:55:51 03/28/08 (0)
- RE: Quality of PSU - frennekamp@netcologne.de 17:08:12 03/28/08 (0)
- RE: Quality of PSU - artcheng@netvigator.com 22:16:25 03/28/08 (0)
- cMP (with RME HDSP 9652) to dCS Scarlatti DAC achieves Jitter of 72ps! - cics 13:15:31 03/24/08 (0)
- RE: cMP (with RME HDSP 9652) to dCS Scarlatti DAC achieves Jitter of 72ps! - Ken Wong 22:38:47 03/26/08 (0)
- Yes cMP works with USB - cics 01:33:05 03/27/08 (0)
- A Remote Pocket-PC (...and some more questions)? - multiblitz 13:02:28 03/22/08 (0)
- RE: A Remote Pocket-PC (...and some more questions)? - cics 13:37:21 03/24/08 (0)
- Good Tools for Windows XP tunning - n_vincent 05:23:30 03/17/08 (0)
- RE: Good Tools for Windows XP tunning - n_vincent 21:44:44 04/01/08 (0)
- RE: Good Tools for Windows XP tunning - artcheng@netvigator.com 07:36:22 04/02/08 (0)
- Definitely worth a try - cics 01:52:14 04/03/08 (0)
- RE: Good Tools for Windows XP tunning - cics 22:04:41 03/17/08 (0)
- Celeron processor experience & latest settings - rickmcinnis@dogwoodfabrics.com 10:05:00 03/18/08 (0)
- RE: Celeron processor experience & latest settings - cics 22:32:24 03/18/08 (0)
- minlogon - ninekit 18:57:07 03/18/08 (0)
- RE: minlogon - cics 22:50:13 03/18/08 (0)
- Thanks and a .flac playback idea - rickmcinnis@dogwoodfabrics.com 09:36:06 03/19/08 (0)
- RE: Thanks and a .flac playback idea - cics 11:07:02 03/19/08 (0)
- RE: Thanks and a .flac playback idea - ninekit 18:19:57 03/19/08 (0)
- That's what motivated my thinking about this - rickmcinnis@dogwoodfabrics.com 09:03:25 03/20/08 (0)
- SSRC - ninekit 02:22:28 03/19/08 (0)
- SSRC - ninekit 01:52:17 03/19/08 (0)
- Sounds very interesting - now to hear cics's appraisal - rickmcinnis@dogwoodfabrics.com 14:47:00 03/17/08 (0)
- RE: Good Tools for Windows XP tunning - artcheng@netvigator.com 08:31:14 03/17/08 (0)
- Minor bug - giulio 04:44:52 03/10/08 (0)
- Just tested with 'B. B. King' and no problems - cics 12:24:41 03/10/08 (0)
- RE: Just tested with 'B. B. King' and no problems - giulio 02:48:59 03/11/08 (0)
- OK that helps. Just recreated this minor bug - will change in next release. Thx. - cics 00:29:22 03/12/08 (0)
- RE: cMP - the open source high-end Memory Player - Thomas B 06:32:29 03/04/08 (0)
- Intel's Diamondville @ 4 watts will be a huge benefit - cics 23:46:33 03/05/08 (0)
- RE: Intel's Diamondville @ 4 watts will be a huge benefit - Thomas B 11:29:35 03/07/08 (0)
- RE: Pico PSU - cics 03:46:18 03/09/08 (0)
- What the optimun hyperX Ram (PC 6400, PC 9600) & Ram Power consumption - n_vincent 12:49:38 03/03/08 (0)
- RE: What the optimun hyperX Ram (PC 6400, PC 9600) & Ram Power consumption - cics 23:10:10 03/03/08 (0)
- CPU Recommendation: Intel E2140 not available, use E1200 (its better!) - cics 02:36:26 03/02/08 (0)
- Power consumption E21xx / C1200 / E22XX - n_vincent 10:26:59 02/29/08 (0)
- Power consumption E21xx / C1200 / E22XX - n_vincent 08:08:32 02/29/08 (0)
- Motherboard MSI with VIA P4M900 could be good - n_vincent 01:27:23 02/28/08 (0)
- RE: Motherboard MSI with VIA P4M900 could be good - cics 03:09:58 02/28/08 (0)
- RE: Motherboard MSI with VIA P4M900 could be good - n_vincent 00:52:53 03/01/08 (0)
- Why Pentium 2140 ? 2160 & 2180 can run at same speed same voltage - n_vincent 01:16:30 02/28/08 (0)
- RE: Why Pentium 2140 ? 2160 & 2180 can run at same speed same voltage - cics 03:00:50 02/28/08 (0)
- What about some of the newer Intel Processors for building a PC? - 64 bit 16:34:20 02/29/08 (0)
- RE: What about some of the newer Intel Processors for building a PC? - cics 00:05:19 03/01/08 (0)
- RE: Why Pentium 2140 ? 2160 & 2180 can run at same speed same voltage - n_vincent 03:46:18 02/28/08 (0)
- faster chips - dzzmiller 20:27:47 02/29/08 (0)
- RE: cMP - the open source high-end Memory Player - dzzmiller@yahoo.com 15:39:25 02/27/08 (0)
- RE: cMP - the open source high-end Memory Player - dzzmiller@yahoo.com 07:42:56 02/28/08 (0)
- RE: cMP - the open source high-end Memory Player - cics 23:08:20 02/28/08 (0)
- Using cMP with EMU soundcards - cics 23:44:26 02/26/08 (0)
- Also set correct CPU Affinity & How 2 adjust latency - cics 22:39:30 03/10/08 (0)
- Do believe it could challenge the Klimax ? - multiblitz 15:39:45 02/23/08 (0)
- RE: Do believe it could challenge the Klimax ? - cics 23:18:54 02/23/08 (0)
- cMP & DCS converter, a dream, thanks Mr CICS - n_vincent 04:17:11 02/24/08 (0)
- RE: cMP & DCS converter, a dream, thanks Mr CICS - cics 06:00:11 02/26/08 (0)
- cMP - memory for 192k sources Windows XP 64 bits - n_vincent 15:15:42 02/23/08 (0)
- RE: cMP - memory for 192k sources Windows XP 64 bits - cics 21:37:04 02/23/08 (0)
- RE: cMP - memory for 192k sources Windows XP 64 bits - n_vincent 03:49:58 02/24/08 (0)
- RE: cMP - the open source high-end Memory Player - Thomas B 08:05:56 02/23/08 (0)
- RE: using mini-ITX mobos - cics 12:45:33 02/23/08 (0)
- RE: cMP - the open source high-end Memory Player - artcheng@netvigator.com 05:02:17 02/21/08 (0)
- RE: SSD drives - cics 04:52:11 02/22/08 (0)
- RE: SSD drives - artcheng@netvigator.com 04:58:44 02/22/08 (0)
- RE: SSD drives - cics 09:17:02 02/22/08 (0)
- RE: cMP - the open source high-end Memory Player - Thomas B 12:47:23 02/19/08 (0)
- RE: Touch screen volume control - cics 01:41:16 02/20/08 (0)
- Memory needed with cMP at 96k - n_vincent 15:18:01 02/18/08 (0)
- RE: Memory needed with cMP at 96k - cics 08:23:24 02/19/08 (0)
- RE: cMP - the open source high-end Memory Player - TubeSatyr 14:13:38 02/16/08 (0)
- RE: Plextools and EAC - cics 21:41:58 02/16/08 (0)
- RE: cMP - the open source high-end Memory Player - music_freak 11:45:59 02/15/08 (0)
- RE: cMP - the open source high-end Memory Player - music_freak 11:15:04 02/19/08 (0)
- RE: Cue files - cics 07:00:59 02/20/08 (0)
- RE: cMP - the open source high-end Memory Player - Thomas B 11:18:38 02/16/08 (0)
- RE: cMP - the open source high-end Memory Player - Thomas B 11:16:48 02/16/08 (0)
- RE: AES/EBU 110 ohm digital output - cics 21:49:52 02/16/08 (0)
- RE: AES/EBU 110 ohm digital output - Thomas B 04:10:22 02/17/08 (0)
- RE: Player without HDD - cics 06:34:37 02/17/08 (0)
- RE: Memory Player - db 10:07:52 02/17/08 (0)
- Ignore Previous Question - db 17:37:47 02/17/08 (0)
- RE: Cue files - cics 04:25:32 02/16/08 (0)
- 192khz digital out soundcard to PC - n_vincent 19:22:25 02/08/08 (0)
- RE: 192khz digital out soundcard to PC - cics 23:04:09 02/08/08 (0)
- RE: 192khz digital out soundcard to PC - n_vincent 03:36:06 02/09/08 (0)
- RE: 192khz digital out soundcard to PC - cics 00:50:26 02/10/08 (0)
- RE: 192khz digital out soundcard to PC - artcheng@netvigator.com 01:29:23 02/10/08 (0)
- RE: 192khz digital out soundcard to PC - n_vincent 04:15:44 02/10/08 (0)
- Question to cics - what's your opinion on CPU undervolting, for instance using CrystalCPUID? - carcass93 13:30:08 01/30/08 (0)
- RE: Question to cics - what's your opinion on CPU undervolting, for instance using CrystalCPUID? - cics 22:46:26 02/01/08 (0)
- RE: cMP - the open source high-end Memory Player - Doc Gaw 06:27:08 01/27/08 (0)
- Vista - cics 08:17:35 01/27/08 (0)
- FSB frequency is only 100Mhz with Biostar P4M900-M7 SE. Is this how it should be? - carcass93 21:57:38 01/26/08 (0)
- RE: FSB frequency is only 100Mhz with Biostar P4M900-M7 SE. Is this how it should be? - cics 00:11:01 01/27/08 (0)
- It's E2140, using normal voltage. - carcass93 06:50:47 01/27/08 (0)
- RE: It's E2140, using normal voltage. - frennekamp@netcologne.de 15:16:04 03/30/08 (0)
- RE: It's E2140, using normal voltage. - cics 07:41:30 01/27/08 (0)
- Problem disappeared shortly after (but not right after!) updating BIOS. - carcass93 07:53:26 01/28/08 (0)
- RE: Problem disappeared shortly after (but not right after!) updating BIOS. - NEIL 14:14:41 02/16/08 (0)
- RE: Updating BIOS - cics 21:59:30 02/16/08 (0)
- RE: Problem disappeared shortly after (but not right after!) updating BIOS. - cics 08:50:19 01/28/08 (0)
- RE: cMP - trojan horse? - jkeny 12:26:40 01/21/08 (4)
- Just Downloaded & Installed: McAfee shows no errors - cics 02:56:00 01/22/08 (1)
- RE: Just Downloaded & Installed: McAfee shows no errors - jkeny 03:13:27 01/22/08 (0)
- I've not had any such notification - rickmcinnis@dogwoodfabrics.com 12:36:34 01/21/08 (1)
- RE: I've not had any such notification - jkeny 13:01:22 01/21/08 (0)
- Advanced: Replace winlogon.exe with minlogon.exe - cics 04:44:30 01/19/08 (9)
- How to implement minlogon.exe (made easy) - cics 09:42:32 02/05/08 (8)
- RE: How to implement minlogon.exe (made easy) - riboge 09:07:40 08/31/08 (0)
- Cics: ok I started this process but ran into a problem - theob 05:21:26 08/29/08 (3)
- Cics: ok I can get 'XPEFP2007.exe' but ... - theob 05:37:28 08/31/08 (2)
- RE: Cics: ok I can get 'XPEFP2007.exe' but ... - seger 08:49:13 08/31/08 (1)
- RE: Cics: ok I can get 'XPEFP2007.exe' but ... - theob 10:11:23 08/31/08 (0)
- Seger and Cics done!!! - theob 11:05:11 09/01/08 (0)
- RE: Seger and Cics done!!! - gagnem 12:33:49 09/01/08 (0)
- RE: Seger and Cics done!!! - theob 12:42:13 09/01/08 (0)
- Cics feedback on minlogon - theob 14:11:39 09/01/08 (0)
- RE: Cics feedback on minlogon - Audio Bling 17:54:09 09/01/08 (0)
- How to disable WFP (made easy) - cics 00:25:26 02/10/08 (0)
- Vista Embedded - edward 22:22:06 02/06/08 (0)
- RE: Vista Embedded - cics 21:21:23 02/07/08 (0)
- BIOS: disable HPET and WDRT - cics 07:07:35 01/16/08 (0)
- How to use cMP if you only have wav (or flac) files - cics 03:22:12 01/16/08 (0)
- Maybe I double post? - steppe 16:52:30 01/15/08 (0)
- Foobar volume control is interesting. Can anyone shed more light on this? - cics 11:48:53 01/13/08 (0)
- RE: cMP - the open source high-end Memory Player - artcheng@netvigator.com 04:27:14 01/05/08 (2)
- RE: cMP - the open source high-end Memory Player - artcheng@netvigator.com 04:28:03 01/05/08 (1)
- RE: cMP - the open source high-end Memory Player - Dynaudio_Rules 15:24:55 01/05/08 (0)
- RE: cMP - the open source high-end Memory Player - Frodan 00:56:51 07/26/08 (0)
- Equipment Used - cics 04:12:39 01/03/08 (5)
- RE: Equipment Used - kana813 14:28:16 01/03/08 (2)
- What do you upgrade aToslink module to? - Kiep 16:27:36 01/03/08 (1)
- RE: What do you upgrade aToslink module to? - kana4813 22:27:47 01/03/08 (0)
- RE: Equipment Used - Dynaudio_Rules 06:06:10 01/03/08 (1)
- I received a wonderful email a few weeks back... - cics 07:50:12 01/03/08 (0)
- RE: cMP - the open source high-end Memory Player - Dynaudio_Rules 04:50:26 01/02/08 (3)
- RE: cMP - the open source high-end Memory Player - artcheng@netvigator.com 07:45:46 01/02/08 (2)
- Here's the individual links - cics 10:14:16 01/02/08 (1)
- Ok Thank You!!! - Dynaudio_Rules 14:07:13 01/02/08 (0)
- RAM / PSU - Audio Bling 04:49:05 01/01/08 (22)
- On OCZ 800MHz 1GB RAM try this setup - cics 08:59:49 01/03/08 (2)
- RE: On OCZ 800MHz 1GB RAM try this setup - Audio Bling 16:11:06 01/06/08 (1)
- RE: On OCZ 800MHz 1GB RAM try this setup - cics 21:43:21 01/06/08 (0)
- RE: RAM / PSU - cics 08:17:30 01/01/08 (18)
- RE: RAM / PSU - Telstar 04:43:32 01/16/08 (4)
- Haven't tried the RME Fireface 800 ext firewire card. - cics 11:25:20 01/21/08 (3)
- RE: Haven't tried the RME Fireface 800 ext firewire card. - Telstar 11:58:45 01/21/08 (2)
- RE: Haven't tried the RME Fireface 800 ext firewire card. - cics 03:26:11 01/22/08 (1)
- RE: Haven't tried the RME Fireface 800 ext firewire card. - Telstar 04:29:03 01/22/08 (0)
- question on PSUs - CD 10:45:19 01/01/08 (12)
- RE: question on PSUs - cics 04:34:20 01/02/08 (11)
- RE: question on PSUs - SashaV 16:26:23 01/03/08 (0)
- RE: question on PSUs - CD 07:53:20 01/02/08 (9)
- RE: question on PSUs - cics 10:31:21 01/02/08 (7)
- RAM / power consumption - edward 00:04:18 01/03/08 (5)
- SiSoft Sandra Memory Bandwidth Test - cics 03:07:34 01/03/08 (4)
- RE: SiSoft Sandra Memory Bandwidth Test - edward 01:20:05 01/04/08 (3)
- Yes the value is based on chipset used. For Kingston HyperX measure I meant Biostar mobo and not Dell... - cics 08:45:43 01/04/08 (2)
- Chipset power consumption - edward 01:45:31 01/05/08 (1)
- RE: Chipset power consumption - cics 05:56:15 01/06/08 (0)
- Thanks! most useful (nt) - CD 11:58:21 01/02/08 (0)
- RE: question on PSUs - db 08:27:14 01/02/08 (0)
- What will this do an existing XP installation? - Kiep 12:50:09 12/31/07 (1)
- RE: What will this do an existing XP installation? - cics 02:41:53 01/01/08 (0)
- Processes you should see in Process Explorer or Task Manager - cics 03:11:33 12/31/07 (0)
- RE: cMP - the open source high-end Memory Player - artcheng@netvigator.com 23:54:40 12/30/07 (1)
- RE: cMP - the open source high-end Memory Player - cics 02:59:49 12/31/07 (0)
- RE: cMP - the open source high-end Memory Player - kana813 21:51:49 12/30/07 (1)
- RE: cMP - the open source high-end Memory Player - artcheng@netvigator.com 23:56:43 12/30/07 (0)
- RE: cMP - the open source high-end Memory Player - artcheng@netvigator.com 16:59:33 12/30/07 (2)
- RE: cMP - the open source high-end Memory Player - artcheng@netvigator.com 17:35:44 12/30/07 (1)
- Thanks - cics 21:16:15 12/30/07 (0)
- RE: cMP - the open source high-end Memory Player - Tuckers 12:47:22 12/30/07 (1)
- RE: cMP - the open source high-end Memory Player - audiofanaat 14:00:41 11/19/09 (0)
- RE: disabling LAN - cics 21:25:01 12/30/07 (0)
- RE: cMP - the open source high-end Memory Player - SashaV 08:24:30 12/30/07 (16)
- RE: Granite Digital PSs - cics 10:20:40 12/30/07 (15)
- RE: Granite Digital PSs - SashaV 16:56:34 12/30/07 (14)
- RE: using external HHDs and Wireless Mouse - cics 22:15:38 12/30/07 (13)
- RE: using external HHDs and Wireless Mouse - Dawnrazor 23:06:37 12/30/07 (12)
- RE: using external HHDs and Wireless Mouse - cics 08:22:20 12/31/07 (11)
- RE: using external HHDs and Wireless Mouse - Dynaudio_Rules 19:05:26 01/02/08 (10)
- RE: using external HHDs and Wireless Mouse - cics 02:48:05 01/03/08 (9)
- Wireless Mouse.....Dawnrazor care to repeat? - Dynaudio_Rules 05:48:26 01/03/08 (8)
- RE: Wireless Mouse.....Dawnrazor care to repeat? - Dawnrazor 17:10:33 01/04/08 (7)
- cMP will work in your setup... - cics 02:41:00 01/05/08 (6)
- RE: cMP will work in your setup... - Dynaudio_Rules 07:22:45 01/05/08 (2)
- RAM playback and Latency settings - cics 08:37:32 01/06/08 (1)
- Ahhhhh, Thanks for explaining - Dynaudio_Rules 09:21:22 01/06/08 (0)
- RE: cMP will work in your setup... - Dynaudio_Rules 07:17:27 01/05/08 (2)
- Dynaudio AIR 12 looks very good! Any idea on cost? - cics 05:58:45 01/06/08 (1)
- RE: Dynaudio AIR 12 looks very good! Any idea on cost? - Dynaudio_Rules 11:53:56 01/06/08 (0)
- RE: cMP - the open source high-end Memory Player - aljordan 07:02:16 12/30/07 (1)
- RE: cMP - the open source high-end Memory Player - cics 09:35:44 12/30/07 (0)
- RE: cMP - the open source high-end Memory Player - dan631 03:03:35 01/05/09 (0)
- Xonar PCIe and pre-upsampling - cics 23:17:05 01/06/09 (0)
- cmp tweaks - dan631 01:26:09 01/08/09 (0)
Follow Ups
- Equipment Used - cics 04:12:39 01/03/08 (5)
- RE: Equipment Used - kana813 14:28:16 01/03/08 (2)
- What do you upgrade aToslink module to? - Kiep 16:27:36 01/03/08 (1)
- RE: What do you upgrade aToslink module to? - kana4813 22:27:47 01/03/08 (0)
- RE: Equipment Used - Dynaudio_Rules 06:06:10 01/03/08 (1)
- I received a wonderful email a few weeks back... - cics 07:50:12 01/03/08 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
