Home Computer Audio Asylum

Music servers and other computer based digital audio technologies.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Computer Audio Asylum ]
[ Alert Moderator ]

RE: cMP new hardware + Juli@w/0.979 drivers + cPlay 145 SNR - 1 step backwards, 2 steps forward

On RAM, I use the auto settings which at CPU Host frequency setting of 170 gives 3-3-3-8. This is good for 96k and CPU is underclocked to 1.02GHz (6x)! Temperature is at 23°C.

In your case at 192k, I would set CPU Host Freq to 180 (giving 1.71GHz @ 9.5x) - this would also lower CPU temp and improve sound. BTW - 50°C is nothing to worry about. On my E6300 I've had it running 7x24 at 65°C - no problems. There's a Gigabyte utility that will show CPU temp - unfortunately its more complex than Biostar's Smart IDE utility.

On Gigabyte mobo, you must also disable these system devices. Make sure to disable Numeric Data Processor & Microcode Update Device.


This post is made possible by the generous support of people like you and our sponsors:
  Atma-Sphere Music Systems, Inc.  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]