Home Computer Audio Asylum

Music servers and other computer based digital audio technologies.

RE: gdrv off but no change in current consumption, 1394.....

Thanks, great to see how optimisations reduce power across different voltage lines. To summarise:

  1. default = (12v@0.32A, 5V@3.88A, 3.3V@0.860A) = 26.1 watts
  2. GA H55M-UD2H BIOS optimised (9x100)in CMP = (12v@0.28A, 5V@2.027A, 3.3V@0.698A) = 15.8 watts
  3. same as 2 at 96k = (12v@0.28A, 5V@2.241A, 3.3V@0.714A) = 16.9 watts
  4. same as 2 at 96k (mobo modified) = (12v@0.18A, 5V@2.226A, 3.3V@0.430A) = 14.7 watts


Interesting to see 5V drop is low compared to 12V & 3.3V lines when doing mobo mods. From your extreme mobo modification post, 5V line drives: RAM, H55 chipset, QPI Link, CPU PLL & ITE/Fan/etc.. Gcore and video chips take power from 12V & 3.3V lines. 5V line is most critical supply. Could a simpler mod be done that just provides clean 5V line from linear PSU or battery?

I was wanting to see if video chips on mobo are affected when the actual LCD display monitor is off. Disabling "gdrv" will not switch off display - its an unneeded device driver in Windows. I installed Windows with default BIOS hence I got to see "1394...". In your case enabling it after installation and in cMP mode will cause BSOD.



This post is made possible by the generous support of people like you and our sponsors:
  Signature Sound   [ Signature Sound Lounge ]


Follow Ups Full Thread

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.