Computer Audio Asylum

Posted by theob (A) on August 24, 2008 at 05:59:08

In Reply to: RE: Also set lower CPU Voltage posted by cics on August 23, 2008 at 19:23:30

I set up my 'cics-pack' (cplay and cmp) with original bios settings from post for the new hw. I believe it was MIT set to auto and clock ratio to 9, fine control to 0.5, enable cpu host clock control, cpu host frequency to 200, memory multiplier to 2.

I get cpuz core voltage of .976 at idle, plus I'm running, src at 192, awe and let me give you more feedback on "nopae" it is simply magnificent. I was too harsh about highs in my initial post. This is the real deal in the highs.

What do I reset host freq to?

• CPU Voltage now set to 1.01250V, Vcc is 0.976V (CPU-Z @idle) - cics 17:23:51 08/24/08 (3)
  • RE: CPU Voltage now set to 1.01250V, Vcc is 0.976V (CPU-Z @idle) - theob 06:40:34 08/25/08 (2)
    • In making Kernal changes(page 40 of 46) in AOB transports - theob 07:46:49 08/25/08 (1)
      • Clock set to 180 Perfect on my system - theob 09:00:57 08/25/08 (0)

Post a Followup:

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Computer Audio Asylum ]
[ Comment ] [ Edit ] [ Delete ] [ Copyright Warning! Click for Details ]

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2008, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---