Home Computer Audio Asylum

Music servers and other computer based digital audio technologies.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Computer Audio Asylum ]
[ Alert Moderator ]

BNC mod for Juli@ low profile

Here is a pic of my BNC mod for a low profile slot.
Photobucket

Solder points were used as Gstew did here.
http://www.audioasylum.com/forums/pcaudio/messages/51805.html

I used a normal blank and cut and bent it to low profile size, cut a hole for toslink with dremel, drilled two holes above and below the dongle and used a tie wrap to hold slot cover to card.

Should have drilled the hole for the BNC a little lower since it interferes when installing a little.

BNC was purchased from the ebay store in the link below. These are insulated and have a small form so they don't interfere with the opening for the pci slot.

I did the mod with an RCA when I first installed this card but have to say the BNC was a definite upgrade over the RCA. I have never used the dongle.

Thanks to all for sharing these mods.

Brad

This post is made possible by the generous support of people like you and our sponsors:
  Kimber Kable  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]