Home Computer Audio Asylum

Music servers and other computer based digital audio technologies.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Computer Audio Asylum ]
[ Alert Moderator ]

grr a typo. 2,06/05 Amps must be:3,06/05 Amps

Thankx for your response. unfortunately it’s a typo. 2,06/05 must be: 3,06/05.

Yes my system is still circling around 2,9 amps on the 5 volt rail at the P24 connector
I went to great lengths in controlling and checking if everything and all value’s were set like the recommendations as described in http://cplay.sourceforge.net/. FSB de-voltage is at – 0,15 V (as recommended).

Since I use linear PSU’s to power the picoPSU-150-XT at the P24 and the P4, I discovered that it’s possible to cold boot at 130 Mhz busspeed and warm boot at 125 Mhz busspeed. However 130 Mhz is to slow for upsampling. Booting at 125 MHz into a normal XP installation is impossible. You than will crash into a BSOD. At 125 MHZ you can only boot into an XP installation that is 100% optimized as per cMP recommendations.

This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]