Home Computer Audio Asylum

Music servers and other computer based digital audio technologies.

RE: Juli@ ASIO Driver and Software

Theob,

Thank you for the reply. I will try it tonight. Didn't see this message earlier. Email notification was off.

Do you have any recommendations on moving the sound card IRQ?
Juli@ shares IRQ 19 with the SATA controller. The Gigabyte MB only has 1 PCIe and 1 PCI slot. The card is PCI. Had to wait a month for the PCIe Juli@ card.

While using the on-board sound card, there was break-up in the audio playback. It doesn't happen with the Juli@ card, but that doesn't mean the SATA controller is not adding noise to the bus. Might try to move IRQ via BIOS, but read the OS takes over anyway, regardless of the BIOS setting. Might also try moving the SSD SATA drives to another connector, but that might not work because of boot requirements. The BIOS had some adjustments, so it may work. If it works, I can shutoff the offending SATA controller.

Might look at a more "advanced" motherboard. The Gigabyte board I'm using allows for under-clocking, but it's missing some fine tuning.
The CPU temp in the BIOS reads between 28C-35C. Most of the time, it's at 32C. Using an i3 Ivy with 22nm technology.

Thanks for your help.

Vince


This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.