|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
|
|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
In Reply to: You clever lad! posted by rick_m on July 27, 2009 at 19:36:26:
Ha, you are too kind.
I suspect the LCD signaling is fairly similar to the type of signaling necessary for CMOS and CCD sensors which I had become quite intimate with at my last position. You start talking about much throughput and those get to be some screaming fast signals. IOW I'm a bit of a ringer.
"Interestingly enough did manage to get some shielding on the front, the touchscreen resistance was low enough that carefully bypassing the tail picked up a few dB."
That is interesting indeed. By the tail are you referring to the screen lens (ie glass or whatever)? In my imager days I used to dream about highly conductive lenses but the best I could come up with was an optically clear ESD coating which didn't prove to really be noticeable in my low fi non calibrated EMI detection station I built out of discarded gear that I found lying around the lab.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: You clever lad! - Ugly 21:44:48 07/28/09 (3)
- RE: You clever lad! - rick_m 23:07:44 07/28/09 (2)
- RE: You clever lad! - Ugly 01:42:33 07/29/09 (1)
- RE: You clever lad! - rick_m 07:14:05 07/29/09 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
