|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
|
|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
In Reply to: Re: DIY "Y cable" interconnect - stereo mini-plug to stereo rca plugs posted by P. Hanley on July 22, 2006 at 07:21:39:
With that design the left and right channel's signal wires would be twisted together and a major crosstalk issue will be a result (the soundstage will collapse, big time), and the cable when wired that way would not involve a noise cancellation geometry. The drain wire you intend to use as a common return runs parallel to the twisted signal wires and the twisted signal wires would not provide noise cancellation as a twist is designed to do. A single channel's signal and return wires need to be twisted together in order to provide noise cancellation. You would be much better off using a proper stereo pair of cables joined at the 3.5mm stereo mini-plug.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Crosstalk and noise issues... - Duster 10:59:05 07/22/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
