Home Planar Speaker Asylum

Welcome! Need support, you got it. Or share your ideas and experiences.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Planar Speaker Asylum ]
[ Alert Moderator ]

RE: digital roomcorrection

i did my measurements at 3 feet for my main filters and they worked just fine. the verification measurement shows very flat response amplitude and phase.

the hdp-express is a good deal if you don't need digital out. it's the exact same hardware and software as the pdc2.6. the only difference i can see is there is no connector on the mainboard for the digital out daughterbord. the solder points are there, but no connector.

i did room corrections by hand with the parametric eq. on room modes with bad decay, i found a narrower, deeper cut than what deqx did automatically was measurably better.
the room correction measurement is handy for impulse response measurements at the listening position.


Edits: 01/17/11
This post is made possible by the generous support of people like you and our sponsors:
  Parts Connexion  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]