|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: If you haven't done this already.... posted by Cougar on March 2, 2024 at 07:17:53:
to zero the readout in ohms you have to also take a reading on the leads themself by shorting the 2 together at the ends. It will not read 0.00 unless it is a VOM that can do that automatically or manually.
The reading will be close but not exactly zero, and read something like 0.03 ohms.
Then proceed with the leads readout making note of the previous reading and what resistance is added to 0.03: + 0.07 or whatever it reads.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- please take note of this post above - Story 07:34:53 03/02/24 (1)
- Yes, you do need to zero out... - Cougar 07:58:29 03/02/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
