![]() |
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: Actually ... posted by John Elison on February 29, 2024 at 12:32:53:
Ok fine and fair enough. I never questioned YOUR experience. Yes continuity is OK for a quick cable check, but is an outdated test procedure nonetheless. Continuity in an electrical circuit proves nothing as far as diagnostics go. And that is where we are at with the original poster's question. "perfect" continuity and even "perfect" circuit resistance still leaves a lot of unanswered questions about circuit integrity.
The whole point in my initial answer before you horned in with that "lack of experience" nonsense was to let the OP know that continuity testing is not going to diagnose the concern. I would START with some resistance readings. And then move to ckts shorted together or to ground somewhere. Then lastly move on to checking the ability of the ckt(s) to carry amperage.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Actually ... - samstone 05:27:02 03/01/24 (1)
- RE: Actually ... - John Elison 14:16:36 03/01/24 (0)