Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

Re: Idea to test if painting back side and edges of CD has an effect on data

134.79.80.104

I don't thing it has anything to do with missing codes. I thing it has to do with a good clean signal coming back to the photo diodes and a cleaner RF signal from that. If you look close at a Cd you'll see through it. The mirror is not 100%, not even close. A lot of laser light gets into the inside of the CD. There it bounces around off all those bumps, the pits from the other side. and it get back out through the same bad mirror it came in through. Now, the laser is red, and with a Green (green the opposit of red) pen we paint out CD around and over the top, and the clear center on both sides. The laser light now run into this green and doesn't come back out. The result, clearner signal from the photo diodes, better RF and a better sounding unit! Now, what is so out of this world about that? Here at the lab we have no problem with people understanding it. Even my ex wife hears it! bobwire


This post is made possible by the generous support of people like you and our sponsors:
  The Cable Cooker  


Follow Ups Full Thread
Follow Ups


You can not post to an archived thread.