In Reply to: BB Proof 2A3 DC posted by Garg0yle on December 5, 2014 at 20:22:08:
In response to various ideas that have come up , I've revised the circuit slightly:
* The first power supply capacitor is now shown as two 100uF/350v caps in series, to provide a better voltage margin for long capacitor life.
* The lower 2A3 cathode bypass cap is raised from 250v to 350v so all the caps are the same.
* I have added a capacitor (also the same) from the tap on the 2A3 cathode resistor to ground; this reduces hum to the driver stage. Thanks to drlowmu for bringing this possible issue to my attention!
With these changes a pair needs ten identical capacitors, which is a common price break point.
I'll revise further if there are issues with the amp once a few have been built.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Circuit rev 2.2 - Paul Joppa 09:30:01 12/11/14 (6)
- RE: Circuit rev 2.2 - Tre' 18:43:40 12/13/14 (5)
- RE: Circuit rev 2.2 - Paul Joppa 11:00:57 12/14/14 (4)
- RE: Circuit rev 2.2 - Tre' 16:06:32 12/14/14 (3)
- RE: Circuit rev 2.2 - Paul Joppa 18:17:18 12/14/14 (2)
- RE: Circuit rev 2.2 - Tre' 19:14:22 12/14/14 (1)
- RE: Circuit rev 2.2 - Paul Joppa 13:21:51 12/15/14 (0)