A few years ago, I had to get rid of my large electrostatics due to downsizing my residence, and I've gone through several sets of used speakers trying to find an acceptable replacement. None has been entirely satisfactory, so I've decided to try a set of backwave horns using Fostex drivers, such as the BK-20/Fostex FE206En combo from Madisound. I'm a fair to middlin' woodworker, FWIW, but not so hot at electronics. Low frequency response isn't much of an issue as I still have a pair of ACI Force subs to fill in the low end.So the questions are:
1) Is there an appreciable difference in performance (other than low frequency response) between the Madisound BK-20 cabinets and the plans provided on the Fostex website linked below? The width of the BK-20 would work better in my living room. Either way, they'll get dressed up with veneer and/or hardwood skins (WAF).
2) I'd been debating using a pair of ESS/Heil air motion transformers as "supertweeters", but I really don't want to use a crossover. Is the high frequency response of the FE206En sufficient to make such augmentation unnecessary? The Horn Shoppe has such an offering (using a crossover, however), but the WAF of that setup won't cut it in this house.
3) Are there other options I'm not aware of that deserve consideration? I looked at the VH-1 from Valutronic, but I have some reservations about the driver quality offered. Resources are such I can only do this once, so I have to get it right the first time, allowing for a little tweaking to get things dialed in.
Thanks in advance,
Todd
Edits: 10/12/15
This post is made possible by the generous support of people like you and our sponsors:
Topic - DIY Fostex FE206En backwave horn questions - Todd A. 07:26:31 10/12/15 (36)
- RE: DIY Fostex FE206En backwave horn questions - hm 12:06:22 11/03/15 (2)
- RE: DIY Fostex FE206En backwave horn questions - hm 12:08:33 11/03/15 (1)
- RE: DIY Fostex FE206En backwave horn questions - hm 12:12:10 11/03/15 (0)
- RE: DIY Fostex FE206En backwave horn questions - Oface 16:38:31 10/15/15 (2)
- RE: DIY Fostex FE206En backwave horn questions - Todd A. 17:08:02 10/15/15 (1)
- Hmmmm..... - Oface 21:52:47 10/15/15 (0)
- BK20 horn questions - bare 10:37:31 10/15/15 (0)
- RE: DIY Fostex FE206En backwave horn questions - geezerrocket 08:16:12 10/15/15 (0)
- RE: "the WAF of that setup won't cut it in this house" - 1973shovel 05:25:47 10/15/15 (1)
- RE: "the WAF of that setup won't cut it in this house" - Todd A. 06:58:31 10/15/15 (0)
- RE: DIY Fostex FE206En backwave horn questions - thetubeguy1954 13:48:19 10/14/15 (5)
- Cool horns...but - morricab 01:06:11 10/15/15 (3)
- RE: Cool horns...but - thetubeguy1954 07:29:30 10/15/15 (2)
- RE: Cool horns...but - morricab 13:02:49 10/15/15 (1)
- RE: Cool horns...but - thetubeguy1954 21:07:33 10/27/15 (0)
- RE: DIY Fostex FE206En backwave horn questions - Todd A. 14:35:34 10/14/15 (0)
- RE: DIY Fostex FE206En backwave horn questions - fin1bxn@msn.com 07:09:55 10/18/15 (7)
- RE: DIY Fostex FE206En backwave horn questions - Todd A. 07:26:12 10/18/15 (6)
- Fe168ez - Kloss 12:50:11 10/13/15 (5)
- RE: Fe168ez - Todd A. 13:44:48 10/13/15 (4)
- RE: Fe168ez - Kloss 18:06:52 10/14/15 (2)
- RE: Fe168ez - Todd A. 06:50:17 10/15/15 (1)
- RE: Fe168ez - Crazy Dave 14:23:56 10/15/15 (0)
- RE: Fe168ez - thetubeguy1954 13:51:37 10/14/15 (0)
- Inductor? - djk 14:29:12 10/12/15 (7)
- RE: Inductor? - Todd A. 06:20:21 10/18/15 (6)
- RE: Inductor? - djk 23:19:43 10/13/15 (5)
- RE: Inductor? - thetubeguy1954 14:01:01 10/14/15 (2)
- RE: Inductor? - djk 15:33:36 10/15/15 (1)
- RE: Inductor? - thetubeguy1954 21:17:57 10/27/15 (0)
- Thank you. - Todd A. 07:28:18 10/14/15 (0)
- RE: Inductor? - freddyi 00:14:52 10/14/15 (0)
- RE: DIY Fostex FE206En backwave horn questions - freddyi 10:07:22 10/12/15 (1)
- RE: DIY Fostex FE206En backwave horn questions - Todd A. 06:31:15 10/18/15 (0)
- RE: DIY Fostex FE206En backwave horn questions - Hornlover 07:48:38 10/12/15 (1)
- Thanks... (nt) - Todd A. 06:17:41 10/18/15 (0)