 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
In Reply to: Ikea, Swedish for 'out of stock' posted by FlatEarth on October 24, 2001 at 23:27:00:
Hi Flat,
The very first Neuance was tested using the original Sound Org first gen tabletop stand and those earlier units(especially the wall support) remain amoungst the most desirable of supporting frameworks for Neuance applications to this day.
I still use a pair of 2nd gen 3-tiers like yours in my home system.They have the inexplicably rare spike decoupling feature for every shelf(via the pointed tabs) unlike the Targets, Standesign, etc. rack systems which must have their lower shelves adapted for Neuance( an easy task yet still unacceptable for many).
Best,
Kenps-I'd go with the wall support for the turntable,myself.That 2 tier is a back breaker.
;0)
Follow Ups:
Hi Ken,A while ago I was given a link from here to a rather long discussion on Audiogon about the use of the Lack table as TT supports, and even to built an equiptment stand using several of them. Due to a virus crashing my system, and even taking out the backup, I have lost the URL. Do you, or any other regulars here know it? Saves you wasting your time and repeating yourself. I need to make a rack for my components and the Lack stand seem like a good cheap idea. I have previously used heavy sandboxes for TT supports, but my current abode is a rental with 'soft' hardwood trampolines for flooring and my 300kg sandboxes will destroy them. This will be an interesting experiment.
By the way, how much weight will the Lack's support? I have a Gyro and a Townshend Rock as TTs.
I have enjoyed your input to this debate of TT supports to be very interesting since I found the asylum, especially as you are generously giving your knowlrdge and experience, even though you are competing with that commercailly. Thanks for sharing.
Cheers
oz
" The fundamental delusion of humanity is to suppose that I am here and you are out there " Yasutani Roshi
> > > By the way, how much weight will the Lack's support? I have a Gyro and a Townshend Rock as TTs. < < <The Lack tabletop will reasonably support components of up to approx 60 pounds.
The major concerns are that it is a thin shelled structure and the veneer can become punctured by sharp spikes or cones if you use them with your kit and also that the design is not particularly well able to handle heavy sideloading.
If you use cones under your components,they must either be of the rounded tip variety like the DH Labs or BDR or you must use a spike protector of some sort to spread the load over a broader surface area(this esp. applies to stacking of Lack tables when used as a rack system).
You can use the free formica sample swatches found at larger home improvement stores stuck down with 3M #714NA general purpose carpet tape to improvise spike protector pads.They can be chosen to match the Lack and also used beneath spiked stands to protect flooring.
With heavy components you should definately add bracing to the legs as sideloading could cause a failure at the junction between the legs and the top. The simple 90 degree angle brackets found at hardware stores will work fine.They should also be glued as well as screwed into place.Best,
Ken
This was just posted over in Tweaks/DIY. Check it out:http://www.AudioAsylum.com/audio/tweaks/messages/44678.html
oz
" The fundamental delusion of humanity is to suppose that I am here and you are out there " Yasutani Roshi
> That 2 tier is a back breaker. <I agree, however, it does force one to kneel appropriately at the altar of vinyl worship :D. I practically have to lie face down on the floor to tune the tuner (Naim), thankfully I usually only listen to CBC Radio 2 (like your NPR) as most of the rest sound crap.
Thanks again for your advice. I will mull over the options for a bit and then do something. I really do hate the hassle of mounting the wall shelf, but my gut instincts tell me that it would be the best option performance wise. I originally bought the SO wall shelf as my table was located quite near to the speakers, and in too tight of a space to accomodiate a dedicated floor stand.
Since taking it down, a friend has kindly given me his old Target TT1, and by chance I recently stumbled upon a used Rega wall shelf at the local dealers for $50. that I just couldn't pass up. In summary, I now have quite a collection of various types lying about the place. I guess that it is time to get the tools out again.
BTW, is that your Roxy X on Mana wall iron in your site pics? I always did like the original Xerses, but haven't yet had an opportunity to hear any of the later models.
Flat
> > > BTW, is that your Roxy X on Mana wall iron in your site pics? < < <yessir Mr.Flat,
that's my baby-
a full boat Roksan Xerxes 10/Artemiz rig
w/DS1.5 psu and XPS5 controller
on a fully Neuanced Mana Phase 2 Reference wall shelf
and currently running an ebony bodied Dynavector Karat Nova.
I like it.
:0)Ken
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
