|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
|
|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
In Reply to: RE: "Padding down" with an L-pad (fixed or rotary) or a series resistor posted by PeterKK on September 30, 2022 at 11:31:17:
. . . it will play too loud and sound excessively bright or shrill. Therefore its output needs to be attenuated to match that of the midrange. This is commonly done with a voltage divider or "L-pad" circuit, consisting of a series and a parallel resistor, which can be calculated if you know the real impedance of the tweeter and the number of dB you need to reduce its output. See the link for a handy calculator.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- If a tweeter has higher sensitivity than the midrange driver it is used with . . . - Brian H P 12:13:25 09/30/22 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
