In Reply to: Very well posted by E-Stat on January 27, 2017 at 10:29:26:
Hello,
You asked for an example of where a distortion measurement matters -- and I gave it to you. And it's not a matter of simply overdriving, since it happens at fairly low output levels.
BTW, it's not a sophomore design issue -- it's a limitation of the driver type. BTW, even in three-ways the problem still surfaces if they can't cross the midrange to the tweeter high enough. But if you don't measure it, you might not know what's causing the issue.
Doug
SoundStage!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Very well - Doug Schneider 10:43:02 01/27/17 (6)
- RE: Very well - E-Stat 10:46:49 01/27/17 (5)
- RE: Very well - Doug Schneider 11:29:53 01/27/17 (4)
- Michael Hedges? - E-Stat 12:23:56 01/27/17 (3)
- RE: Michael Hedges? - Doug Schneider 13:48:49 01/27/17 (2)
- Thanks for your input -nt - E-Stat 14:00:28 01/27/17 (1)
- You're welcome ... nt - Doug Schneider 14:02:54 01/27/17 (0)