Vinyl Asylum

RE: Anticipating...

136.162.45.134

cbrady

In Reply to: RE: Anticipating... posted by J.D. on August 16, 2007 at 08:46:45

"Teres 'rimdrive' modification / motor presumes ownership of a full teres beltdrive"

Not at all. The Verus motor will work with any turntable so long as there is space to place the motor next to the platter.

Follow Ups:

RE: Anticipating... - ffrr 23:43:20 08/17/07 (0)
but don't you need a smooth finely machined outer surface as well? Many turntables do not have this, as they were never designed to be driven on the rim. Turntables with subplatters, turntables with belts that drive on a smaller diameter hub/surface under the platter, internal idler drive tables, turntables that are driven by a circular or square belts that have a notch machined in the outer rim, and direct drive tables, all may not be suitable.

-----------------
RE: Anticipating... - J.D. 13:44:04 08/16/07 (0)
Any table at all that isn't already a direct drive or an idler drive, that is.

Because--- you just Lean It Against The Platter !

.... I was cured, alright.

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.

This post is made possible by the generous support of people like you and our sponsors:

Schiit Audio