![]() ![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
69.143.33.148
In Reply to: RE: Where to buy aluminum extrusion to make stand frame? posted by michaelv20850 on March 19, 2008 at 15:03:00
Most of the posts have a hole in the center that will need to be drilled and tapped for whatever thread pitch you will use.
Many of the manufacturers of extruded t-slot frames will offer both metric and standard sizing, and the center bore will generally accept either a self tapping screw or be easily threaded (it's aluminum) to match either metric or standard. In other words: if it's a metric t-slot, you can pretty easily use a metric screw or bolt - if it's a standard t-slot, a standard screw or bolt will work. They will generally recommend a specific thread diameter and pitch for use in the central bore, such as M6-10 or 1/4"-20tpi.
Follow Ups:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: