 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
135.245.8.1
In Reply to: RE: I" do not buy the argument given by the guy below" posted by Allen Wright on March 26, 2010 at 07:32:14
Here are what would be readers take from your posts here:
1)I, Allen Wright, not shilling even though I have been doing this for years. Please do not banned me here;
2)The tube E34 PP circuitries are still not exhausted yet. There are still new “designs” there. We, Allen Wright and partner, come up new circuit for the PP EL34 amp. (Keeping in mind there are only four components in the tube PP amp: tube, resistor, capacity, choke/transformer, and wires.)
3)Our new design is far better than Chinese’s
4)We are smarter than 1 billion Chinese’s for sure.
5)All Chinese’s circuits were copied from others, and because that they are crap.
6)Our products are better (Allen’s mods services), you actually can hear a difference because our new innovations (new "design").
Follow Ups:
hey-Hey!!!,
There are all sorts of ways to make a poor tube amp. Do please post this link you spoke of documenting circuits employed by current Chinese manufacturers.
Just for the record, I don't care where you're from; it is quite possible to pick either a good circuit or a bad one and build it with either sufficient parts or poor ones. As far as commercial gear goes, there seems little of it done with the thoroughness and overdesign that DIY is capable of.
cheers,
Douglas
Friend, I would not hurt thee for the world...but thou art standing where I am about to shoot.
You are obviously a Chinese manufactuer, why don't you share what your contributions have been to the industry...
No, I am not Chinese manufacture. Shall I? Sure, I wish so.
But I do not want be a person who trashes Chinese’s products and accuses Chinese wrong doing on one hand, while living on mods services on Chinese products on other hand.
No, I do not want to share my contribution here.
> > But I do not want be a person who trashes Chinese’s products and accuses Chinese wrong doing on one hand, while living on mods services on Chinese products on other hand. < <
I have never made a penny from working on Chinese amps, and don't really intend to start as I have throughbreds to build and work on. I have worked on one, as a favour to a friend, and the improvement was tremendous. But I have inspected a lot, and my opinion stands.
It's my partner in Australia who has a good business correcting the basic errors in Chinese amps - and his clients are very happy with the results.
Regards, Allen
> > You need to read my post better! < <
OK, lets read your posts very carefully and highlight those your own words here:
“...I have worked on one, as a favour to a friend, and the improvement was tremendous. But I have inspected a lot, and my opinion stands...”
You said you actually worked on ONLY ONE Chinese amp in your life!!!!! But you “inspected” a lot. First of all, no one will believe such statements that one “inspected” a lot of Chinese amps, but only worked on one. Secondly, even one may make your statements a little weaker, it is fair for one to conclude that you actually never worked a Chinese amp at all (not even one).
Now take a look at your others:
“It's my partner in Australia who has a good business correcting the basic errors in Chinese amps - and his clients are very happy with the results.”
“Most of their circuits are blatent copies of often poor western circuits, executed with poor quality parts.”
“It;s not juat my designs they ripoff...”
“I consider we build state of the art gear, in line with, say Ferrari, and I guess I get a little upset with people buying cheap stuff and then accusing good tubes as being the problem.”
If I read you correctly, you were based on your friend’s experiences and hence accused Chinese here. Frankly, I am puzzled how can you still be allowed here as an Audio business owner. You should have been banned a long time ago.
...because I add value in giving much good advice to those with serious questions, based on my 40 years of hands on experience. Seems like you are here just for the joy of arguing.
Regards, Allen
You are joking, right? or you think all the readers' IQ are below 40?
It does NOT matter how much "contributions" you had here, if you broke rules, then you broke and screwed, period. Again as I said, I am still puzled how you can be continuited to post here. Shame of you!
You have only a sole goal here to steer the triffic to your business, that is shilling. Just look at your website, all are the Asylum post references.....
You have pointed out the inconsistet enforcement of the posting rules. Get a grip, that is the way it is; if you want the same treatment, make the same contribution.
cheers,
Douglas
Friend, I would not hurt thee for the world...but thou art standing where I am about to shoot.
"Get a grip, that is the way it is; if you want the same treatment, make the same contribution."
Is this new rule here? I do not see in the Asylum rules.
here are the general posting rules:
http://www.audioasylum.com/scripts/d.pl?audio/rules.html
he consistently violated the rule B, D, and E.
here are posting rules for business owners or assoicates:
http://www.audioasylum.com/scripts/d.pl?audio/manrules.html
he consistently violated the general rule 2 as stated:
"We ask that you observe the following special rules for posting which are designed to maintain the non-commercial, hobbyist nature of the Asylum while maximizing the participation of industry members."
herein the special rules 2 - 5.
I have to agree with you. I like Allen but as you say a lot is him selling his mods. He needs to stay away from doing that. Be better if he just ran an ad here then everyone would know of him and his services.
Then he could just focus on being just one of the many people who post here and everyone would still know who he is and what he offers business wise.
PJB
Who makes a living servicing and repairing Chinese gear? So far you have gotten upset about people sharing their opinions on Chinese gear based on direct experience, yet you offer no argument that these feelings are wrong...
DanL
No, I have no intention to offer argument of these feelings are wrong or right. It is free world, you feel whateve you like.
Just like your three-word of Moniker, the last word "plate" can be a verb, though. Am I care for other's feeling towards to your Moniker name is right or wrong? I do not care.
Post a Followup:
| FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
||||||||||||||
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
