![]() ![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
24.128.56.196
In Reply to: RE: Full Monkey amps posted by vhrynchuk on November 14, 2010 at 08:44:53
I like it!
Follow Ups:
I have been playing around with
the 6J5/6EM7 in DRD for gain of 100
and an output impedance of 750.
Maybe use a Hammond 126B interstage.
and Magnquest EXO-010 plate choke.
Voltage swing of up to 200V capable.
DanL
![]()
Interesting tube: One section is a preamp triode with Ra of 40K, 330 max plate volts, 66X amplification and a 1.5W max dissipation. The other section is a low-mu power triode, 10W max dissipation, Ra of 750 ohms, 330 max plate volts also, and 50mA max current.
Are you using both sections (input-driver)?
"What did the Romans ever do for us?"
![]()
Frihed
The 6EM7 gain section does not
lend itself to DRD or Full Monkey
as it's Rp is too high.
Above is a directly coupled circuit.
For FM or DRD use a 6J5 as the gain tube
and the 6EM7 power section as the driver.
DanL
![]()
C1 is actaully smaller ... 4.7uF
Gluca
Looks good except for one thing.
The B+ is way too low.
The CCS can only swing about 25V.
Make the B+ 350V and replace
the CCS with the interstage
and all will be well.
Slightly higher ouput impedance
and slightly less linear but nice.
DanL
![]()
Actually I am running B+ at 380V and voltage swing is good for my headphones and as line driver. Yes, you need more headroom as driver stage. I must admit I was surprised by this small tube, damn good sounding tube!
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: