Computer Audio Asylum

• In making Kernal changes(page 40 of 46) in AOB transports - theob 07:46:49 08/25/08 (1)
  In Reply to: RE: CPU Voltage now set to 1.01250V, Vcc is 0.976V (CPU-Z @idle) posted by theob on August 25, 2008 at 06:40:34

  There is mention of editting noexecute=always off and that this works best when Bios Execute Disable Bit is disabled. I'm using the Gigabyte mobo and I believe this feature (Bios Execute Disable Bit is disabled) is not there. Is it still ok to try this as well as timeres and nodebug in the start up and recovery settings in control panel?

  Also I think somewhere between 200 and 170 clock setting in Bios might be optimum for me. Ok to try any value in between?
  
  

  ---

  Edits: 08/25/08
  • Clock set to 180 Perfect on my system - theob 09:00:57 08/25/08 (0)
    In Reply to: RE: In making Kernal changes(page 40 of 46) in AOB transports posted by theob on August 25, 2008 at 07:46:49

    I made the clock switch to 180---perfect. Now I know how to trim my system after future changes if I should not like the balance.
    
    Still would appreciate feedback on kernel revisions. Also I could only make some of the registry changes. Couldn't find New > Dword to disable balloons. Couldn't get MenuShowDelay, took care of prefetcher.In ntfs LAST UPDATE, ALREADY HAVE 'NTFSDISABLE8DOT3' SET TO 1. Is that same thing already set up?
    I don't think I have Service pack 2. It must be xp pro initial release.
    
    

    ---

Post a Followup:

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---