Planar Speaker Asylum

Welcome! Need support, you got it. Or share your ideas and experiences.

Planar Speaker Asylum

RE: DEQX HDP-3 and bi-amping Magnepan MG20.1

98.206.43.107

In Reply to: RE: DEQX HDP-3 and bi-amping Magnepan MG20.1 posted by rathbone on April 05, 2008 at 10:30:50

I use a DEQX PDC 2.6 and tri-amp my MG 3.6's. (about to send my PDC off to Australia to get the 2.6 - to - 3.0 upgrade)

I have found using the same crossover points as chosen by Megnepan, but sttepr slopes, sounds best to me. I am using 200 Hz and 1500 Hz crossover points, 96 dB / octave Linear Phase topology. I tried other slopes, but did not like the sound.

In my opinion the BIGGEST and BEST change came from removing the passive crossover beterrn mid and tweeter- going full TRI AMP

Follow Ups:

RE: DEQX HDP-3 and bi-amping Magnepan MG20.1 - MrHiEnd 13:31:52 04/06/08 (0)
Thanks Bill and rathbone,
Appreciate your help.
It looks like I will start with 150Hz xover point, and use suggested 96dB slopes in Linear Phase topology and work from there.
I'll set the system first without active sub and once I'm happy with the results I may try to integrate active sub (probably at freq lower then 35Hz) and see if I like it.

Thanks
Richard

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft