RE: the owner is claiming...

Follow Ups Full Thread

Topic - Teres : "Direct Coupling ... a quantum leap in speed stability compared to traditional belt drive" - J.D. 11:34:41 08/01/07 (143)

Suggestion for a Verus Experiment - GGA 11:52:24 08/03/07 (5)

RE: Suggestion for a Verus Experiment - Thomas_A 03:33:58 08/05/07 (0)

Interesting - unclestu52 02:43:16 08/05/07 (3)

VPI Tri-pulley - Dave Garretson 04:37:07 08/05/07 (2)

RE: VPI Tri-pulley - unclestu52 14:32:35 08/05/07 (1)

Clearaudio and TW Acustic - GGA 17:45:48 08/05/07 (0)

There is a good reason idlers were used between the drive and the table rim. - ffrr 04:27:58 08/03/07 (1)

Speed control - JTimothyA 20:41:22 08/03/07 (0)

RE: Teres : "Direct Coupling ... a quantum leap in speed stability compared to traditional belt drive" - HW 12:39:25 08/02/07 (3)

RE: Teres : "Direct Coupling ... a quantum leap in speed stability compared to traditional belt drive" - cbrady 15:37:24 08/02/07 (2)

RE: Teres : "Direct Coupling ... a quantum leap in speed stability compared to traditional belt drive" - HW 09:38:05 08/06/07 (1)

RE: Teres : "Direct Coupling ... a quantum leap in speed stability compared to traditional belt drive" - cbrady 11:29:24 08/06/07 (0)

Ping cBrady.. a small request - J.D. 11:45:30 08/02/07 (9)

RE: Ping cBrady.. a small request - cbrady 17:14:23 08/02/07 (5)

so can you give us a Win Place Show from your point of view ? - J.D. 17:24:37 08/02/07 (4)

RE: so can you give us a Win Place Show from your point of view ? - cbrady 22:54:18 08/02/07 (3)

Thanks for .... - J.D. 09:55:11 08/03/07 (0)

As nuance is an natural enemy of the fanatic I'm afraid ... - bjh 08:52:17 08/03/07 (0)

Superb - highest order information ...... - bornin50s 06:22:45 08/03/07 (0)

The Teres Tech Page is Referring to the Certus motor, not the Verus Motor - rgordonpf 16:53:45 08/02/07 (2)

Ooops. guess I was unCertainus about the many new... - J.D. 17:10:54 08/02/07 (1)

Your HIgh School Latin is Still Pretty Good - rgordonpf 20:33:52 08/02/07 (0)

I'giss I need to read this h'yar thread .... bbbut I only spent five dollars for my ROK. - Elmo 05:54:26 08/02/07 (1)

it's the harvey wallbanger before noon that kickstarts the day - J.D. 11:56:49 08/02/07 (0)

Does speed stability even matter? - ketchup 18:26:28 08/01/07 (30)

RE: I brought up "dynamic drag" at the cutter once before ... - Aleksunder 05:04:05 08/03/07 (0)

Linn LP12/Lingo, Pioneer, Linn Axis measurements - Thomas_A 23:01:06 08/01/07 (0)

Just try a belt drive before and after adding a speed control - powermatic 21:53:53 08/01/07 (7)

exactly ... - TBone 22:29:12 08/01/07 (6)

Yeah, but ... - Dave Pogue 07:53:16 08/02/07 (5)

Thread Drive - Dave Garretson 08:26:36 08/02/07 (4)

I didn't give up easily. - Dave Pogue 09:11:52 08/02/07 (3)

RE: TNT Tweaks & Verus - Dave Garretson 10:53:41 08/02/07 (2)

Well, one thing is clear. - Dave Pogue 11:20:16 08/02/07 (1)

Indubitably - Dave Garretson 11:53:20 08/02/07 (0)

RE: Good point - user510 19:34:09 08/01/07 (1)

Hmmm... - anumber1 19:46:44 08/01/07 (0)

braintwister ... not - J.D. 19:28:33 08/01/07 (2)

RE: braintwister ... not - ketchup 21:09:38 08/01/07 (1)

setting as goal : to match flaws = tail-chasing - J.D. 14:07:39 08/02/07 (0)

To my ears yes - Mark Kelly 18:59:29 08/01/07 (7)

RE: To my ears yes - ER 11:23:37 08/02/07 (3)

Would you mind explaining how? (nt) - ketchup 15:47:52 08/02/07 (2)

RE: Would you mind explaining how? (nt) - ER 13:16:34 08/03/07 (1)

Thanks - ketchup 15:47:57 08/03/07 (0)

RE: To my ears yes - ketchup 19:08:59 08/01/07 (2)

You missed my point - Mark Kelly 19:29:57 08/01/07 (0)

like a direct drive? [nt] - OMalley 19:13:36 08/01/07 (0)

RE: Does speed stability even matter? - unclestu52 18:51:10 08/01/07 (6)

RE: Does speed stability even matter? - ketchup 19:02:25 08/01/07 (5)

RE: Does speed stability even matter? - unclestu52 00:45:21 08/02/07 (3)

RE: Does speed stability even matter? - belyin 23:49:03 08/02/07 (1)

No idea - unclestu52 02:26:49 08/05/07 (0)

good post. thnx for research ... nt - J.D. 10:38:16 08/02/07 (0)

which goes back to tape speed stability .... [nt] - OMalley 19:16:50 08/01/07 (0)

maybe this will help drop the price of those idlers on ebay - OMalley 17:20:55 08/01/07 (0)

the owner is claiming... - analog guy 14:55:06 08/01/07 (4)

RE: the owner is claiming... - cbrady 15:02:39 08/01/07 (3)

RE: the owner is claiming... - user510 15:49:59 08/01/07 (2)

RE: the owner is claiming... - cbrady 16:59:14 08/01/07 (1)

RE: conversely....... - user510 18:24:59 08/01/07 (0)

RE: I was wondering when you guys were going to get wind of this..... - user510 14:23:36 08/01/07 (17)

RE: I was wondering when you guys were going to get wind of this..... - HW 12:21:29 08/02/07 (1)

a turntable "rim driven by a flywheel" - J.D. 14:45:42 08/02/07 (0)

Grey Hammerite finish with Bakelite Knobs --- on the launch pad .. - J.D. 15:00:16 08/01/07 (7)

Nope. Had nothing to do with this forum. In this revealing post, johnnantais - powermatic 09:33:02 08/02/07 (5)

Sorry but no. - cbrady 12:01:48 08/02/07 (1)

Not to worry. The only parade being rained on is the 'March - powermatic 12:27:19 08/02/07 (0)

RE: revealing post - J.D. 11:24:46 08/02/07 (0)

He is so eloquent in describing other's idea's, work, ect. as his own... - rich121 10:15:04 08/02/07 (1)

RE: "....why...." - powermatic 11:43:28 08/02/07 (0)

RE: my Guess... - user510 15:41:49 08/01/07 (0)

RE: "eddy brake" - Ivan303 14:32:11 08/01/07 (6)

RE: "eddy brake" - unclestu52 15:18:00 08/01/07 (0)

RE: "eddy brake" - user510 14:47:58 08/01/07 (4)

I dunno... - anumber1 17:02:47 08/01/07 (3)

RE: I defer to your.... - user510 17:47:43 08/01/07 (2)

North American Railroading is steeped in tradition - anumber1 18:24:09 08/01/07 (1)

RE: North American Railroading is steeped in tradition - user510 19:16:58 08/01/07 (0)

Oh my god... - EdAInWestOC 12:58:35 08/01/07 (9)

Sir....excuse me, but it seems your turntable has arrived. - powermatic 13:25:31 08/01/07 (7)

Somehow that's overdoing it... - EdAInWestOC 14:01:22 08/01/07 (2)

This is a bit more up my alley... - EdAInWestOC 14:05:45 08/01/07 (1)

Kind of like this... - EdAInWestOC 14:09:54 08/01/07 (0)

It should be renamed the "Billus" n/t - viridian 13:45:59 08/01/07 (0)

imo, that table is a metaphor for America nt - Plinko 13:34:04 08/01/07 (2)

Something along these lines, perhaps? - powermatic 13:42:15 08/01/07 (1)

park that car and put that table in this small family home: - Plinko 13:55:51 08/01/07 (0)

uhm,,,, Digital Compact Cassette ? - J.D. 13:11:12 08/01/07 (0)

I've heard they are shipping now - Caspyr 12:33:01 08/01/07 (6)

Here's a first impression from a VA inmate. - powermatic 13:57:13 08/01/07 (5)

it sounds similar to what people post when trying an idler vs belt - OMalley 18:00:42 08/01/07 (4)

Yeah, nicely done mini-review. Kudos to 'Cappy' for - powermatic 23:01:13 08/01/07 (3)

RE: Yeah, nicely done mini-review. - J.D. 11:00:52 08/02/07 (1)

I'm with you on the rather puzzling 'Leaning Tower O' Idler' - powermatic 12:09:57 08/02/07 (0)

Could get a .. for half that.or - OMalley 05:16:52 08/02/07 (0)

RE: Teres : "Direct Coupling ... a quantum leap in speed stability" .... tech link - J.D. 11:55:12 08/01/07 (46)

this is the greatest invention since, well, the Direct Coupled Lenco. nt - Plinko 13:57:53 08/01/07 (0)

Not so strange - unclestu52 13:32:34 08/01/07 (12)

RE: Not so strange - TBone 21:45:57 08/01/07 (0)

A minor disagreement - Mark Kelly 18:47:36 08/01/07 (8)

RE: A minor disagreement - unclestu52 00:59:46 08/02/07 (2)

it's an easy comparison ... - TBone 11:32:55 08/02/07 (0)

Agreed - Mark Kelly 01:45:21 08/02/07 (0)

well, - TBone 21:17:56 08/01/07 (4)

Huh? - Mark Kelly 00:24:06 08/02/07 (3)

RE: Huh? - TBone 11:04:20 08/02/07 (2)

Sorry - Mark Kelly 15:29:23 08/02/07 (1)

no problem ... - TBone 16:21:51 08/02/07 (0)

RE: Not so strange - cbrady 14:38:47 08/01/07 (1)

Not quite right - Mark Kelly 18:40:47 08/01/07 (0)

That's a strange way to go.. - jsm 12:38:08 08/01/07 (30)

You are missing something - Mark Kelly 16:20:13 08/01/07 (0)

RE: That's a strange way to go.. - cbrady 14:52:51 08/01/07 (17)

Wrong! - jsm 15:02:58 08/01/07 (16)

How so? - cbrady 15:32:04 08/01/07 (15)

i wonder.... - mikel 16:29:33 08/01/07 (14)

RE: i wonder.... - John Elison 21:26:03 08/04/07 (12)

RE: i wonder.... - cbrady 17:02:16 08/05/07 (11)

RE: i wonder.... - John Elison 22:37:54 08/05/07 (10)

Digital Jitter - Dave Garretson 16:56:46 08/06/07 (6)

RE: Digital Jitter - John Elison 19:10:54 08/06/07 (5)

RE: Digital Jitter - Dave Garretson 20:45:22 08/06/07 (4)

RE: Digital Jitter - John Elison 05:55:27 08/07/07 (3)

Your shootout & jitter - Dave Garretson 08:50:24 08/07/07 (2)

RE: Your shootout & jitter - John Elison 09:50:06 08/07/07 (1)

RE: Your shootout & jitter - Dave Garretson 11:24:29 08/07/07 (0)

RE: i wonder.... - cbrady 07:19:48 08/06/07 (1)

Well, I guess we'll just have to disagree.... - John Elison 08:01:21 08/06/07 (0)

The point I'm making ................ - bornin50s 02:51:12 08/06/07 (0)

Entirely different method of speed control - Mark Kelly 16:34:37 08/01/07 (0)

not at all - J.D. 13:30:42 08/01/07 (4)

Ummm, well no. - Mark Kelly 16:30:18 08/01/07 (1)

RE: Ummm, well no. - J.D. 14:30:16 08/02/07 (0)

Some comments. - jsm 15:11:08 08/01/07 (1)

RE: comments. - J.D. 15:19:06 08/01/07 (0)

RE: That's a strange way to go.. - gariepyf 12:46:57 08/01/07 (5)

Hmmmm.... - bjh 12:50:08 08/02/07 (1)

LOL1 ( NT )_ - unclestu52 02:29:44 08/05/07 (0)

RE: That's a strange way to go.. - HW 12:33:46 08/02/07 (2)

So if one were to claim that adding an SDS motor controller to a VPI table resulted in a Quantum Leap...... - Ivan303 16:17:36 08/02/07 (1)

The astute manufacturer will blush at such positive reports, not dispute them! he-he nt - bjh 18:12:54 08/02/07 (0)

perhaps they'll change to a grease bearing too ;-)nt - old6eyes 12:05:20 08/01/07 (0)

Follow Ups

RE: the owner is claiming... - cbrady 15:02:39 08/01/07 (3)

RE: the owner is claiming... - user510 15:49:59 08/01/07 (2)

RE: the owner is claiming... - cbrady 16:59:14 08/01/07 (1)

RE: conversely....... - user510 18:24:59 08/01/07 (0)

Post a Message!