|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Mark... posted by mosin on July 19, 2006 at 19:30:36:
You are correct Mosin, I am still using the capacitor.
I understand that the SDS is not ideal because I still use the capacitor, but with the current arrangenement, I have gained the flexibility of making the single speed R-o-K drive, a dual speed drivewithout having to cobble a pulley. I have a fair number of LP's and EP's that run at 45 RPM, so it is a necessity for me.Also, as you stated, the use of the Rek-o-Kut motor and thread transformed the liveliness and impact of the TNT. There still is a slight elevation of the noise level when compared to the stock drive, but this is probably because I removed both the TNT motor as well as the heavy flywheel. The TNT is now driven directly by the R-o-K motor without the flywheel. I am working on addressing the noise level with a very simple trick, however :-)
Close to the Edge, down by the river....
-Ray
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Yes indeed... - Ray-o-Stat 05:28:57 07/20/06 (2)
- If Mosin is right - Mark Kelly 16:11:15 07/20/06 (1)
- I don't have a scope :-( /nt\ - Ray-o-Stat 19:10:24 07/20/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
