![]() |
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: "So" posted by 1973shovel on April 14, 2014 at 06:23:38:
but I suspect you won't countenance any of the options. :-)) :
1. buy a different arm.2. buy a cart which has a longer bolt-hole-to-stylus distance than your current cart.
3. move your arm towards the spindle 1/8" (if the cart is jammed up against the outer end of the headshell slots). This will mean you have to make a slight elongation in the hole in the plinth/armboard which the arm pillar goes through.
4. use an alignment which is suggested by the late, great Allen Wright (Vacuum State) - the 'Guru' method - which you can get on the VSE web-site. This places the stylus back towards the pillar by about 0.8mm, from the main arc.
I have a Wallytractor for my Graham 2.2, BTW. Works perfectly because my G2.2 is mounted at a distance that puts the cart bolts in approx. the middle of the headshell slots (for my Grado and for my Benz, anyway).
It's a great device.
Regards,Andy
Edits: 04/14/14
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Your problem can be solved .... - andyr 13:23:08 04/14/14 (1)
- RE: Your problem can be solved .... - John Elison 14:09:13 04/14/14 (0)