![]() |
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: No, and for a second reason posted by 1973shovel on April 13, 2014 at 09:59:40:
Wally makes his arc protractors to Löfgren "A" and Löfgren "B" specifications. Rega uses a completely different alignment geometry. On the other hand, if you can get the stylus to follow the arc on your WallyTractor, you should be able to get a perfect alignment. The cartridge will be angled inward a couple of degrees, though. The only problem you might face with a Rega tonearm is not being able to move your cartridge far enough forward to allow the stylus to follow the arc. Is that your problem? Was your cartridge all the way forward in the headshell slots but still not far enough forward to follow the arc?
Best regards,
John Elison
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: No, and for a second reason - John Elison 10:22:44 04/13/14 (15)
- RE: "Was your cartridge all the way forward in the headshell slots " - 1973shovel 12:50:42 04/13/14 (14)
- "Same table, same arm"??? ... - andyr 13:36:04 04/13/14 (3)
- RE: "So" - 1973shovel 06:23:38 04/14/14 (2)
- Your problem can be solved .... - andyr 13:23:08 04/14/14 (1)
- RE: Your problem can be solved .... - John Elison 14:09:13 04/14/14 (0)
- RE: "Was your cartridge all the way forward in the headshell slots " - John Elison 13:22:03 04/13/14 (9)
- Thank you for the history lesson - 1973shovel 14:02:41 04/13/14 (8)
- You raise a great point - Lew 06:57:15 04/14/14 (3)
- RE: You raise a great point - John Elison 08:58:28 04/14/14 (2)
- concur with John - Analog Bob 09:23:03 04/14/14 (1)
- RE: concur with John - Lew 11:10:43 04/14/14 (0)
- RE: Thank you for the history lesson - John Elison 14:24:12 04/13/14 (3)
- I have thought about remounting the tonearm - 1973shovel 06:13:05 04/14/14 (2)
- RE: I have thought about remounting the tonearm - John Elison 08:22:03 04/14/14 (1)
- Thanks John - 1973shovel 10:49:05 04/14/14 (0)