|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: How's this sound? posted by Phil on February 8, 2000 at 17:21:16:
As I had mentioned, I am still experimenting but from what I've heard so far, I will procede with the finished product. I did not stuff the prototypes and the bottoms are closed. I used schedule 40 and I bought it at Home Depot. I didn't have a 2.375 in hole saw so I took the other approach and cut 1.41 in squares of 3/4 in plywood to register on the inside of the pipe and screwed them down to a base board at the right spacing. I'll be able to use this board for the base of my mold (removed after set-up). I went ahead with the sched. 40 because it was cheap and available. I think that between the fact that the tubes will be damped by the stuffing and the amount of acoustic energy transfered to the tubes will not be significantly audible, It should result in a good facsimile.Best of luck
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: How's this sound? - manx 20:35:06 02/08/00 (3)
- Re: How's this sound? - Jon Risch 10:52:37 02/09/00 (2)
- Re: How's this sound? - manx 17:13:05 02/09/00 (1)
- Re: How's this sound? - Jon Risch 17:22:46 02/09/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
