|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: I have used the flat silver for years and used teflon . . . posted by SoftwireEngineer on August 9, 2003 at 19:19:43:
I use 30 guage thick by 18 guage wide - flat wire. I use either a three braid for the IC or a 4 braid for the speakers with a 4 braid return, separate four braid wires that are each braided for each speaker (tweeter/midrange). Then I use a 4 braid -same as above - with a 8guage by 24 guage thick extra wire for the woofer section.Swest is a good place to pick this up.
1 800 527 5057 call and get a cataloge the wire I use (flat) is on page 216 order# FS-139 for the 18X30 guage ( I made a mistake when I said it was 28 guage thick, but 30 is better anyway). You get about 40 feet per oz. Great stuff. I have used it for over 10 years now. Way before anyone was using flat wire and advertizing it.
ja in too hot, Tucson, AZ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- It's all in the details. . . - John PA 20:18:51 08/09/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
