|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: I have used silver for years and. . posted by John PA on August 9, 2003 at 08:21:30:
After having 47Labs OTA in my system which is 26AWG Copper I thought I would try an approx. gauged Silver and it works nicely between the Amp tp Passive. Between the DAC and Passive I dod not like the sound over the OTA. Speakre wires I am trying 24AWG which is being run to the Topend with Tara Labs TFA Copper on the bottom. I imagine it is as good as DH Labs stuff or better.I did not have luck with Cardas SLVR RCAs,but will be trying a few others to see what effect it might have. I still have a set of the SLVRs!
I thought Daytons WBT Knockoffs are really great in order to cut corners for RCAs/ I will try Homegrowns to see if they are better and being SIlver Plated they should be.
As I stated the reason for asking the questions was due to the insistance that thicker Silver seems to be the reason for brightness.
Also I am trying to get away from Teflon and go with an Air diaelectric. I tried TechFlex in order to insulate using uninsulated Silver. Works fine!
Thanks for the reply!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: I have used silver for years and. . - NEAR SOTA 15:13:52 08/09/03 (3)
- I have used the flat silver for years and used teflon . . . - John PA 15:28:05 08/09/03 (2)
- Re: I have used the flat silver for years and used teflon . . . - SoftwireEngineer 19:19:43 08/09/03 (1)
- It's all in the details. . . - John PA 20:18:51 08/09/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
