![]() |
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
Hi, all,When our house was built in 1990 the electrical contractor ran an extra AC line to the (unfinished) basement. The line is the usual residential "14/2 with ground" (three-wire) 15 amp flat cable, runs from the breaker box to a junction box on the ceiling joists of the basement.
I would like to extend this unused line to make a dedicated outlet in my listening room.
I would simply have to extend the line about 30 feet to the (already installed) wall outlet in the listening room. I would be using the same wire type to extend the line.
My question: what would be the best way to splice the three 14-gauge wires? I know an electrician would probably twist the wires and apply a wire nut, or use some kind of crimp fastener.
In the interest of making a solid connection for best current delivery, and to avoid future oxidation, my inclination would be to:
1) thoroughly clean the wires with contact cleaner or metal polish
2) tightly twist the wires around each other longitudinally
3) solder the connection
4) cover each of the three splices with heavy shrink tubing and maybe additional electrical tape over the whole thingCan anyone recommend a better or more effective splicing technique? Is there a "proper" splicing method that might be required to meet electrical codes?
I know the "easiest and best" procedure would be to hire an electrician to simply run an intact line all the way from the breaker to the outlet, but it seems like such an easy and fun project!
Thanks!
Ken
Edits: 12/29/07
This post is made possible by the generous support of people like you and our sponsors:
Topic - Home ACline wiring: best way to splice? - FidPup 09:34:22 12/29/07 (30)
- RE: Home ACline wiring: best way to splice? - bluelobster 16:50:14 01/01/08 (0)
- RE: Home ACline wiring: best way to splice? - jea48 07:48:10 01/01/08 (0)
- The soldering procedure you describe appears to still be OK. - rick_m 15:28:32 12/30/07 (16)
- RE: The soldering procedure you describe appears to still be OK. - jea48 18:36:52 12/30/07 (15)
- Right, it has to be spliced then soldered. - rick_m 19:40:28 12/30/07 (14)
- RE: Right, it has to be spliced then soldered. - jea48 21:13:41 12/30/07 (13)
- RE: Right, it has to be spliced then soldered. - rick_m 07:13:27 12/31/07 (12)
- micro-arcing in supply wire - GTF 07:51:14 12/31/07 (11)
- LOL, great post...... - jea48 17:54:50 12/31/07 (7)
- Here is a better picture to justify $120.00 outlets. - GTF 13:58:11 01/01/08 (6)
- RE: Here is a better picture to justify $120.00 outlets. - jea48 11:09:35 01/04/08 (5)
- Why Square D? - GTF 12:46:41 01/04/08 (4)
- In commercial application Square D is considered the Hi-End of Panel Boards. nt. - jea48 21:18:20 01/05/08 (3)
- A breaker - GTF 21:30:12 01/05/08 (2)
- Thanks... If you have a Menards in your town A QO120 costs about $6.50 - jea48 21:44:31 01/05/08 (1)
- Well, in that case I will go out and find a Square D breaker. - GTF 06:09:31 01/06/08 (0)
- RE: micro-arcing in supply wire - rick_m 09:19:29 12/31/07 (2)
- My picture stinks. yep - GTF 09:56:47 12/31/07 (1)
- RE: My picture stinks. yep - jea48 18:33:10 12/31/07 (0)
- RE: Home ACline wiring: best way to splice? - panhead 21:52:09 12/29/07 (7)
- RE: Home ACline wiring: best way to splice? - no5oh 20:10:38 12/30/07 (0)
- RE: Home ACline wiring: best way to splice? - jea48 18:46:56 12/30/07 (2)
- Or snaked through small holes drilled through studs. - GTF 19:40:48 12/30/07 (1)
- True, or through holes in floor joists. Still bet there is a staple here or there. nt. - jea48 21:19:29 12/30/07 (0)
- That sounds like the ticket! - Julien43 04:24:07 12/30/07 (2)
- RE: That sounds like the ticket! - panhead 14:51:41 01/01/08 (0)
- RE: That sounds like the ticket! - no5oh 20:25:25 12/30/07 (0)
- RE: Home AC line wiring: best way to splice? - Glen B 13:35:35 12/29/07 (1)
- Do it right... - RickeyM 22:33:30 12/31/07 (0)
- RE: Home ACline wiring: best way to splice? - Tweekeng 09:47:45 12/29/07 (0)