|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: exactly right. thats the thing that most posted by snkby on June 17, 2004 at 20:42:39:
what i soon found was that the compliance was too stiff once the equipment was on it.That's not necessarily a bad thing.
What was the resonant frequency of the combination? Such a system isolates vibration above its resonant frequency so if your resonant frequency was down around a few Hertz or so, it would be effective at isolating frequencies above that.
se
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: exactly right. thats the thing that most - Steve Eddy 10:16:46 06/18/04 (5)
- "Stiff Compliance" = high resonant frequency - pburant 12:33:13 06/18/04 (2)
- All else being equal... - Steve Eddy 18:06:15 06/18/04 (1)
- adding mass seems to increase - snkby 20:08:55 06/18/04 (0)
- it was too stiff as in it would not - snkby 11:03:15 06/18/04 (1)
- Re: it was too stiff as in it would not - Steve Eddy 18:07:13 06/18/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
