|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: What did you use for the base of your room lens? posted by Steve on June 4, 2000 at 19:58:36:
I used 3/4" plywood, two sheets glued and screwed in a sandwich.
Drilled the three holes with a hole saw, used three pan head
screws inside the PVC pipes to secure to the plywood base, and
used 3/4" plywood supports at the top. I went to a local sporting
good store and purchased field points for archery arrows and
screwed them into tapped holes in the plywood bases. They turned out
very well and a set of three was less than $60 in materials.
They may not be as pretty as the Argent version, but I saved $1140 ;)
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: What did you use for the base of your room lens? - Drew 15:03:20 06/07/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
