Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.
You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.

You must login to use this feature.

Inmate Login

By default, logging in will set a session cookie that disappears when you close your browser. Clicking on the 'Remember my Moniker & Password' below will cause a permanent 'Login Cookie' to be set.

Moniker/Username: The Name that you picked or by default, your email. Forgot Moniker?	Examples "Rapper", "Bob W", "joe@aol.com".
Password:	Forgot Password?
	Remember my Moniker & Password ( What's this?)

If you don't have an Asylum Account, you can create one by clicking Here.

Our privacy policy can be reviewed by clicking Here.

Inmate Comments

From:
Your Email:
Subject:

Message Comments

Original Message

Re: What did you use for the base of your room lens?

Posted by Drew on June 7, 2000 at 15:03:20:
I used 3/4" plywood, two sheets glued and screwed in a sandwich.
Drilled the three holes with a hole saw, used three pan head
screws inside the PVC pipes to secure to the plywood base, and
used 3/4" plywood supports at the top. I went to a local sporting
good store and purchased field points for archery arrows and
screwed them into tapped holes in the plywood bases. They turned out
very well and a set of three was less than $60 in materials.
They may not be as pretty as the Argent version, but I saved $1140 ;)