Home Tubes Asylum

Questions about tubes and gear that glows. FAQ

Re: Improving the bass response of Williamson amps

Chris,

A helpful post.

1. I have 2 of the 47uf in series so effectively 23.5uf, but still double the original 10uf. I will bring it down to 10uf. I have Solens on order. The 50uf bias cap was replaced with 100uf/100v cerafine.

2. For coupling, I used a pair of 0.22uf and another pair of 0.1uf caps (original was 0.05uf) 400v Illinois Capacitors (the yellow ones sold at VTV). My experience is these take about 30-40hrs to break in and open up. Am still waiting...

Thanks,

Francis



This post is made possible by the generous support of people like you and our sponsors:
  McShane Design  


Follow Ups Full Thread
Follow Ups
  • Re: Improving the bass response of Williamson amps - Francis S 09:02:19 02/13/02 (0)


You can not post to an archived thread.