In Reply to: RE: Studio monitor volume controls rotation posted by Sumflow on July 2, 2012 at 02:09:04:
The printing is not off at all.
The +4dB setting is meant to be used if you feed them a pro level balanced signal (nominally 2.83V) and the -10dB setting if you send them a consumer level non-balanced signal (nominally 0.7V).
Consequently they will be louder with any given signal on -10 than on +4 as the on-board amps make up for the 11.79dB difference in the two.
(It is 11.79 difference because one is actually referenced to dBu the other dBV but I keep forgetting which is which.)
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Studio monitor volume controls rotation - b.l.zeebub 04:27:34 07/02/12 (1)
- PS: - b.l.zeebub 08:44:45 07/02/12 (0)