|
Bottlehead Forum Welcome! Need support, you got it. Or share you ideas and experiences. |
|
|
|
Bottlehead Forum Welcome! Need support, you got it. Or share you ideas and experiences. |
|
In Reply to: Re: paramour ground buss wire? posted by jjz on January 9, 2006 at 16:29:08:
Thank you JJZ and Will48.I spoke with Dan today and learned that the black insulated wire (the only wire that comes with the kit) is used for all wiring; the copper wire is no longer used for the ground bus due to problems with stipping that beginners like myself used to experience.
I also learned that the black insulated wire to be used for the ground bus need not be doubled and twisted, nor does it need to be stripped for the whole length. The length of the ground bus wire is simply cut in two and stripped at the four terminations to facilitate connections with the three terminal points to which it needs to be soldered.
Thanks again,
Myrun
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: paramour ground buss wire? - myrun 18:59:00 01/09/06 (1)
- Re: Very nice post! - . 06:45:26 01/20/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
