Welcome! Need support, you got it. Or share you ideas and experiences.
24.5.109.220
...just a quick reality check:1) As only one type of wire came with the paramours, do I use this insulated black wire as the ground buss even though the instructions and photos refer to solid copper wire?
2) Do I use the same twisting technique shown for the copper wire?
Follow Ups:
What was on the packing/check list? I've not had this kit but my Seduction kit listed types and lengths of wire - if a substitution has been made then I'd presume there would be enough for both jobs - measure it and see, if not I guess the buss wire got missed out! Just a thought.
the bus wire on mine was the solid copper wire.
Thank you JJZ and Will48.I spoke with Dan today and learned that the black insulated wire (the only wire that comes with the kit) is used for all wiring; the copper wire is no longer used for the ground bus due to problems with stipping that beginners like myself used to experience.
I also learned that the black insulated wire to be used for the ground bus need not be doubled and twisted, nor does it need to be stripped for the whole length. The length of the ground bus wire is simply cut in two and stripped at the four terminations to facilitate connections with the three terminal points to which it needs to be soldered.
.
This post is made possible by the generous support of people like you and our sponsors: