Welcome! Need support, you got it. Or share you ideas and experiences.
Return to Room Acoustics Forum by Rives Audio
98.195.71.32
Hi, I'm building a dedicated 2 channel room in my house that is being built as we speak. It's about 15.4 W x 10 H x 22 L feet and located on the second floor - actually the only room on the second floor. I told the builder the front, back, and side walls have to be double sheet rocked (total 1 inch in thickness). The walls have R15 insulation, the floor has R30 insulation, and ceiling has R40? (blown insulation). Floor will be carpeted. Now the problem is this. On the other side of one of the long side walls is the attic space. I thought that the outer side of the long wall facing the attic space will have a single layer of sheet rock (half inch). But the builder just told me there will be no sheet rock, just the insulation and a thin "waterproof" insulation. Same situation for the front wall possibly. Will this be a problem acoustically?The back wall has single sheet rock on outer side and the other long side wall is actually is part of the wall of the house facing outdoors lined by brick.
Edits: 05/07/09Follow Ups:
From a low frequency perspective, the best wall is no wall. This applies to your room too. Having no wall on that side makes the room larger at low frequencies, and that's a Good Thing. However, left-right symmetry is important at mid and high frequencies. So if you have absorbing surfaces on one side, the other side should be treated the same. Or you can apply heavy cardboard over the insulation at non-reflection points to match the reflecting wall on the other side.
--Ethan
Thanks Ethan. That was very helpfu.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: