Welcome! Need support, you got it. Or share you ideas and experiences.
212.23.126.5
In Reply to: RE: wideband shouting/beaming? posted by protos on September 15, 2007 at 15:37:55
Hi,
the nominal impedance of Prometheus is 8 Ohms. The widebands measure a minimum of about 6 Ohms, the Gemini tweeters are nominal 16 Ohms, the impedance- minimum is about 12 Ohms. Please send me a pic of the wiring of your baffles that i can have a look if it is wired ok..
Regards
Robert Bastani
Follow Ups:
I think everything is wired ok.The 12ohm is parallel ,wired to + and - of the wideband then the tweeter is also parallel to the wideband with the difference that the cap is in series to the + tweeter terminal.Mathematically speaking 8 ohms paralleled with 12 ohms is 4.8 ohms and this paralleled with 16 ohms is around 3.7 ohms.Correct?Or I am doing the calculations wrong?
Hi,
from your description the wiring seems to be ok.
The impedance of speakers is always impedance vs. frequeny, the curve is rising and falling - measuring the connectors of the drivers without signal shows the minimum impedance only.
The drivers doesn`t work in parallel, they are separated by the crossover. In the crossover- region the impedance of the widebands is relatively high and the series caps of the tweeters rise the impedance for the tweeters to lower frequencies. The paralleled resistors flatten the impedance- curve to offer tube- amps optimized conditions.
Regards
Robert Bastani
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: