• RE: Wiring a sub woofer output on a kit 1 or 2 - Pauly 18:05:44 09/21/07 (3)
  In Reply to: RE: Wiring a sub woofer output on a kit 1 or 2 posted by GTCharlie on September 21, 2007 at 16:54:53

  Hi GTCharlie.
  
  I want to use a powered sub, so I need a line level output. I use the Kit 2 volume control as I have no pre amp.
  
  Thanks
  Paul
  
  

  ---

  • RE: Wiring a sub woofer output on a kit 1 or 2 - GTCharlie 17:31:37 09/23/07 (2)
    In Reply to: RE: Wiring a sub woofer output on a kit 1 or 2 posted by Pauly on September 21, 2007 at 18:05:44

    If you're still shopping for a sub, look for a model which accepts "speaker level" input. This means you just connect it to the speaker binding post at the back of your amplifier. Once you adjust balance in relation to your main left/right speakers, the sub is controlled by the volume pot in the amp. Get a model with adjustable frequency cut-off, and a volume potentiometer. Size and power will depend on : your main speakers, the room, and the kind of music you mostly play. Generally, a ten incher, with a 100-150watt amp should do very well. Hope this helps. What speakers are you using Paully?
    
    

    ---

    • RE: Wiring a sub woofer output on a kit 1 or 2 - Pauly 09:29:13 09/24/07 (1)
      In Reply to: RE: Wiring a sub woofer output on a kit 1 or 2 posted by GTCharlie on September 23, 2007 at 17:31:37

      Hi GTCharlie
      
      How does the arrangement you recommend work? Does the sub act as a high pass filter and pass a filtered signal to the speaker, or does it tap the speaker in a benign fashion and let the whole signal (unfiltered by crossovers) through to the speaker?
      
      I am about to try out a single driver back loaded horn speaker (FE126E Fostex based), so I would loath to send the signal through a crossover. The whole idea of going single driver is to avoid passive crossovers.
      
      For the interim I was thinking of purchasing a parts express sub. They have some inexpensive subs that work quite well that allow for adjustable frequency cut off.
      
      Thanks
      Paul
      
      
      

      ---

      • RE: Wiring a sub woofer output on a kit 1 or 2 - GTCharlie 17:16:29 09/24/07 (0)
        In Reply to: RE: Wiring a sub woofer output on a kit 1 or 2 posted by Pauly on September 24, 2007 at 09:29:13

        great. Are you using the 126 in the Fostex reflex/horn box? or Ed Schilling's or which enclosure.... Your main speaker/horn gets signal direct from the amp speaker binding post. And so would your sub. JUst get a sub which accepts speaker level input. Hope this helps.
        
        

        ---

Post a Followup:

This post is made possible by the generous support of people like you and our sponsors:

Schiit Audio

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---