|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
24.63.60.116
In Reply to: Re: STILL not there. posted by jmc on September 10, 2006 at 17:53:15:
The crescent magnet is all the way over...as close as can be without hitting.
Follow Ups:
did you move the crescent magnet over while the knob was turned to the maximum speed setting? If not that could give you the little bit of extra space you need to achieve proper speed. also, I hope you are warming the table up for fifteen to twenty minutes before checking your speed. 124s tend take take some time to stabilize.
I thought it was usually either erratic or too slow...and that was why it needed to be warmed up? In any case, a couple of times i ran it 15-20 minutes to take a break...if anything it was running FASTER after that, not slower.Yes, the knob was set to the maximum setting before I moved the magnet....
Frustrated,Dave
are you checking speed with the built in strobe? If you are it wouldn't hurt to try a strobe disc from another player. Also are you sure your looking at the right line of squares on your thorens strobe? There are 4 instead of the usual 2 or 3. Otherwise, I'm stumped.
Yes, I checked with another strobe...also too fast.
This post is made possible by the generous support of people like you and our sponsors: