|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
71.222.188.198
In Reply to: So if I plug in my headphones . . . . posted by Quiet Earth on March 5, 2007 at 21:29:20:
not sure if your being facetious but I will address your questions.". . . will I suddenly hear a major improvement in the AC power quality because the walls are not vibrating from the speakers?"
One cannot use this scenario as the vast change in the acoutical environment when wearing headphones vs. the room and the room is taken out of the equation is too large and the AC assesment would be overshadowed.
"What if I just turn the volume way down? Should I hear the quality of the mains improve compared to when it was playing loud?"
What we are dealing with here will have more to do with room acoustics and it's effect on the system sound. If poor room acoustics are in play, then again, one would hear the reduction of the influence of the room way before hearing the effects it has on the AC integrity.
"Would this be a good way to see if I'm making improvements in my AC line "acoustic isolation"?"
Again, if U have a very poor room in which the room is awash in acoustical distortion(s), then it would be hard to discerne just how much the AC is being effected by the room acoustic bombardments as these would be the overlaying issues masking the small details.
Follow Ups:
IF my AC wiring and outlet are performing poorly because of acoustic interference, then couldn't I just reduce the volume a little and hear the AC quality get better? I think I can tell the difference between overloading the room and improving the electronics. I also think it would be worth knowing if I have a problem before I attemp to fix it.Ordinarily I would just do an A/B swap, or, tweak and untweak to find out for myself. But it takes several hours to do an outlet change/tweak. I have to take components out of my rack to get access to the AC outlet, and then put it all back together again. At that point, who would know what I really changed?
Anyway, I think this is a reasonable question for those of you who claim that acoustic vibrations deteriorate the quality of the AC mains. I am not trying to be a "non believer", I just want to know what I am supposed to be listening for before I tear it all apart again. I think its a fair question.
Hope that clears things up a bit. Thanks for putting up with me.
Best,
QE
HowdyI'm steering clear of most of the issues in this thread but merely addressing "IF my AC wiring and outlet are performing poorly because of acoustic interference, then couldn't I just reduce the volume a little and hear the AC quality get better?"
Everything you are talking about is a linear operation, i.e. turning down the volume by 10% causes 10% less vibration causes 10% less distortion, etc. and you end up with exactly the same relative distortion cause by acoustic interference at any volume, hence changing the volume doesn't tell your ear anything about how much acoustic interference you have. Now when non-linear things start happening it's another story (e.g. in my room when the bass gets loud enough to cause the air ducts and those silly metal air vents to start rattling :)
But I do understand what you're saying about exciting things in the room. Acoustically, that is. I'm just trying to use my "turn the volume down" test to get an idea of whether or not my AC wiring (and outlet) can be tagged as problematic. Or something worth pursuing. I have a strong feeling that it is not.Maybe my system doesn't care if the AC isn't perfect. That could be the most likely reason why AC tweaks have very little, if any, effect over here.
"I'm just trying to use my "turn the volume down" test to get an idea of whether or not my AC wiring (and outlet) can be tagged as problematic. Or something worth pursuing. I have a strong feeling that it is not."The AC wiring/outlet issues only came to light after I had extensively tweaked my system(s), including the room, to a high degree of resolution.
Therefore, I would suggest that one take care of big system tuning issues such a room acoustic treatment, component isolation from the environment,ETC. before venturing down the AC refinement path.
The Oyaide WCP-Z is THE most cost effective upgrade one can do to mitigate the acoustical resonances which result when soundwaves impinge on the drywall if their AC outlets are mounted to drywall.
Cheers,
This post is made possible by the generous support of people like you and our sponsors: