|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
222.152.192.209
In Reply to: Re: Choke loaded triode output impedance posted by dave slagle on April 7, 2007 at 16:17:45:
all in one RIAA filter what will happen when the impedance drops below the 1K9 below say 100hz? Will the bass go or be boosted.
Follow Ups:
Hi!At the point where the impedance of your chokes starts to have an effect on the output impedance, your driving stage will start to have a roll off.
Typically one would select the input impedance of the RIAA network to be about 10 times the output impedance of the driving stage. A drop of the output impedance would theoretically boost a bit, but much less than the rolloff which it would have itself.
With a rp of 1.9k it should not be difficult to find a choke which gives a very low roll off frequency.
Best regards
The choke that I have has -1db @ 12hZ, -3DB @ 3hZ and -.1 @ 128Hz at an Rp of 1K9.Is this good enough?
Hi!Would be good enough for me!
oops... forgot to close the bold tags on the earlier post...your bet bet is to simply sim it and see for yourself how the ideal should work. I have been dealing with LR and LCR networks lately so i'm not sure what will happen with your particular network.
This post is made possible by the generous support of people like you and our sponsors: