|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
69.253.123.130
In Reply to: Re: USB Bandwidth posted by Gordon Rankin on September 22, 2006 at 07:57:40:
Hey, thanks for the correction.
Follow Ups:
Thanks guys! So, do you think the Opticis cable will work for 24 / 96 material?
Yes the Optics cable should work with most USB audio devices that handle 24/96. Just make sure its ONLY 2 channel. If its one of those 7 or 10 channel or some such no way is USB 1.1 going to handle it. You CAN use the 1.1 cable with a 2.0 port on a computer, it works fine, it just transfers data at the "full speed" rate not the "high speed" rate.
Exactly what I needed...thanks John! Yep, this is solely for 2 channel use (Audigy 2 NX to a Sony STR-DA2000ES).Thanks again!!
Unfortunately the 2 NX is the least likely to work with the Optics cable. It is one of the few that DOES use a real 2.0 interface. I do remember reading that I think it can also work with 1.1 up to some level, but I'm not sure what that was.
I assume Opticis simply a type and you are asking whether a USB-> Toslink adapter does support 24/96 over USB1.1?If the device is build to support it than this is no problem. Even the standard USB audio driver in Windows supports this out of the box.
I always carry around an Audiotrak Optoplay and that works with 24/96 over Toslink just fine.
Cheers
This post is made possible by the generous support of people like you and our sponsors: