|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
In Reply to: I have collections of sports cards, comic books and guns.... posted by Chris Garrett on July 03, 2000 at 22:37:07:
I've never reloaded. I would like to, primarily .45 ACP. Any suggestions for a beginner? Go ahead and buy a progressive like the Dillion 550 or start out with something cheap and simple like a lee single stage or turret press?
***I've never reloaded. I would like to, primarily .45 ACP. Any suggestions for a beginner? Go ahead and buy a progressive like the Dillion 550 or start out with something cheap and simple like a lee single stage or turret press?How many rounds you use per month?
If any number over 500, then you WILL move to a progressive soon. You will definitely replace your single-stage. In such case save money, and buy a Dillon right away. 550 is a fine machine, but if you stretch just a bit more, then the 650 very well may be the last machine that you would have to buy. It can go slow or fast and is very versatile. You can buy just the base machine and learn, then add the accessories.
rec.guns is full of advice and discussions on reloading.
Thanks Victor. I'm averaging around 300 rounds per month, but a big chunk of those are .22's. I have a Ruger Single Six I use to practice with, mostly working on obtaining the sights rapidly. Plus its just a fun gun to shoot. Ok they all are fun to shoot. I also have a Ciener conversion for my 1911 which I just bought fairly cheap. I'd prefer to shoot more .45's which is why I started looking into reloading. I doubt I'll ever shoot more than 500 rounds per month on average. Probably more like the current 300 or maybe eventually 400. I also shoot .357 mag and 9mm.I shoot in my back yard which is convenient, and my neighbors are cool, but I don't want to over do it. Just like I don't mind if their dogs go on a barking jag occasionally, but I don't want to listen to it every night. So I usually limit myself to between 50-100 rounds per session, a couple of times a week.
One buddy suggested I start with a single stage, while another said no, no, no start with a progressive, you'll end up there anyway. Hmmm.....
***Thanks Victor. I'm averaging around 300 rounds per month, but a big chunk of those are .22's. I have a Ruger Single Six I use to practice with, mostly working on obtaining the sights rapidly. Plus its just a fun gun to shoot. Ok they all are fun to shoot. I also have a Ciener conversion for my 1911 which I just bought fairly cheap. I'd prefer to shoot more .45's which is why I started looking into reloading. I doubt I'll ever shoot more than 500 rounds per month on average.Oh, man, are you wrong! As soon as you get that reloader you will tripple that monthly volume! Trust me on that one! You will get three times the fun for the same price. More practice - great thing if you have time.
Those are wrong who buy the reloaders to save money - your expense WILL go up, but your fun index will far outstrip it.
Chris is VERY right when he says the reloading is thing in itself - it IS a lot of fun.
***Probably more like the current 300 or maybe eventually 400. I also shoot .357 mag and 9mm.
I shoot in my back yard which is convenient, and my neighbors are cool, but I don't want to over do it. Just like I don't mind if their dogs go on a barking jag occasionally, but I don't want to listen to it every night. So I usually limit myself to between 50-100 rounds per session, a couple of times a week.That does sound cool, but if you care for my advice, consider all those liability implications, and find a good club. I have one where you get the key to facility within fifteen minutes from here, and it is a great peace of mind. But of course, that is just me.
***One buddy suggested I start with a single stage, while another said no, no, no start with a progressive, you'll end up there anyway. Hmmm.....
As I said before, the second guy is right. And again, Chris is right, the machine itself is only a part of the overall expense. Like in high-end audio, there is no shortage of accessories and tools.
"Oh, man, are you wrong!"HAHAHAHAHAHA. You're probably right!
"...but if you care for my advice, consider all those liability implications..."
I may eventually join a club. I'm not too worried about liablility. My property slopes gently down to the edge of a ravine where it makes a 20 foot vertical drop. It then shoots up at about a 2:1 to the top of the next ridge which is 40 -50 feet above my head from my shooting position. I own to the top of the ridge and there are no houses in that direction at all. The neighbors are to my left and right, at greater than 90 degrees from my direction of aim and several hundred feet away. The other neighbor is across the street at 180 degrees. I always check to see if there are any trespassers before i shoot. Still your point is well taken.
***I always check to see if there are any trespassers before i shoot.Yeah, I see. You make sure someone is there before wasting your bullet.
I'd say that is pretty reasonable... :-)
I could have worded that better :-)
Thanks for that, Mike.
nt
Does that mean some digging the next night?
nt
I ended up with the RL550b due to cost and ease of changing the
die plates, one can remove them easily and keep the settings in
tact. I have 6 or so set up for .40 S&W, .357, .45 ACP, .223 Rem.,
.308, and 9mm. The RL 650 is a bit trickier and is more expensive, more for the massive commercial reloader. The RL550b can crank out
500 rounds an hour quite easily and Dillon's customer service is
to be envied. Hornady, LEE, and RCBS all make nice progressives, but the Dillon was where I spent my money.There are a lot of ancillaries in reloading, so figure on spending two
or even three times the price of the press (RL550b= $326 in June catalog) for things like dies, converter plates, scales, case priming tools, loading blocks etc. It's a blast however! Nice solitary hobby
apart from actually capping them off when all is said and done.If you want, I can mail you this catalog, email me your addy. Or Dillon's number is 800-762-3845 or www.dillonprecision.com
Take care, Chris
Thanks for the offer Chris. I have a Dillion catalog I picked up at a local shop and have been to their website. Everybody I've talked to that has a Dillion can't say enough good things about them. Of course RCBS and Hornaday are known for good products also. Decisions, decisions.
***Thanks for the offer Chris. I have a Dillion catalog I picked up at a local shop and have been to their website. Everybody I've talked to that has a Dillion can't say enough good things about them. Of course RCBS and Hornaday are known for good products also. Decisions, decisions.I have a Hornady too, and there is no comparisson - Dillon eats it for lunch. Except those super-shitty Dillon primer pick-up tubes and idiotic primer flip-up trays (a silly solution to the self-inflicted problem). These need to be tossed right away and replaced with the Hornady brass tubes - there is none finer. You will not need those trays with Hornady tubes. Otherwise, easy decision.
I have no experience with RCBS progressives. Do they even make them?
I have no experience with RCBS progressives. Do they even make them?They make one that they've been advertising, but I don't know anything about that particuler press.
Does this answer your questions?
Please move to Missouri. The house next door is for sale. I just love neighbors with cool stuff :-)
That picture brings a tear to my eye.Chris
This post is made possible by the generous support of people like you and our sponsors: