|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
66.173.32.173
In Reply to: Re: Interconnects between MP-1 and MA 2.2 posted by Springbok on May 11, 2006 at 15:06:44:
I also use neglex (MP-3 - MA-1)and would be very interested in hearing your opinion of them.
Follow Ups:
So the Neglex, 2534, XLR, 20 ft arrived and is hooked up. How much break-in time does it need? I will post impressions.
Do you have to have the cable or amp end "loaded down" to 600 ohms to take advantage of this? I'm currently using 5 meters of generic silver cable between my MP3 and S30 with resitors at the amp end of the cable so that the preamp "sees" 600 ohms. Is this the way it should be done?
600 Ohms is to low for a MP3. Numerous people have reported better dynamics with 1200-1500 for a MP3. 600 was suggested for the MP1.
Legendre, I ordered both. Franks, that's a good question. I was going to use the low impedance switch, as I do with the Dominus. I dont see that Ralph recommends changing the impedance switch for different cables with the MP-1/MA 2.2 set-up.
Try it- which ever way works better is the one to use :)
| ||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: