 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
72.35.45.212
In Reply to: Re: Vas measurement.....NT posted by GM on March 16, 2007 at 08:41:02:
That's what I got measuring a couple 515Bs with Delta mass and a CLIO.
Measured the clay with my Ohaus reloading scale, I know it's different from the factory specs but it's what I got.Did'nt build anything it was for a friend.Later
Rich
Follow Ups:
Dear Rich,could you post the formula you used to calculate VAS from the mass?
Thank you,
M
I did not calculate it from the mass...the CLIO system does a sweep,
you add a known mass to the cone run the sweep again and it spits out
the T/S parameters.You can also run the second sweep with the driver mounted in a box of known volume and it will give you the T/S numbers
based on that.Later
Rich
Dear Rich,I see, thank you for your reply.
M
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
