 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
58.104.18.243
In Reply to: Marantz 8260/SC3 New Problem posted by stvnharr on March 29, 2007 at 17:41:48:
flip the filter switch at the back [turn unit of first] noise [fault] usually there if on custom but no noise on normal. restart on normal, if noise gone then it is one of the ribons not making a perfect conections, reconect all your conections and try again with the filter switched to custom.Reconect all your ribons etc even if the above does not aply, I have found common losses or noises in SACD but not cd are due to the ribons.
Hoping one of the above but if not....sorry and good luck
Follow Ups:
nt
Bad ribbon cable connection on ribbon between transport and main board, the one nearest the front. I have reseated the cable so as to not produce noise. If I have future troubles with this, I will replace the ribbon.
I'm pretty sure this was it, as I was able to reproduce the noise when I jiggled the cable. I think it only occurred on sacd as it is passed in the outer two cables, while cd is farther inward with solid connection. It was the outer two cables in the ribbon that made noise when I jiggled.
I've unplugged and replugged this cable many many times due to all the reworkings and modifying I have done on the player. And this all eventually caught up to me.
Hopefully now I can just let the player play and leave it be!!!
Glad to have helped. Enjoy
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
